Pusat pemesinan portal vertikal

Pinnacle DV 1432

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 710 mm, diameter pembubutan: 710 mm, daya motor spindle: 11.000 W, kecepatan spindel (min.): 38 rpm, kecepatan spindel (maks.): 3.800 rpm, jarak pergerakan sumbu X: 690 mm, jarak lintasan sumbu Y: 115 mm, jarak gerak sumbu Z: 1.545 mm, gerak cepat sumbu X: 4 m/menit, pergeseran cepat sumbu Y: 26 m/menit, pergerakan cepat sumbu Z: 40 m/menit, kecepatan rotasi (maks.): 6.000 rpm, jenis arus masuk: tiga fasa, hidung spindel: JIS A2-8, berat keseluruhan: 14.000 kg, panjang alat: 300 mm, berat alat: 10 g, jarak perjalanan sumbu W: 1.550 mm, Perlengkapan: dokumentasi / manual, de Fgjdpjyqx Rzjfx Am Soc

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, CNC lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and subspindle Control: Mazatrol PC Fusion CNC 640T Technical data: Max. swing diameter: 525 mm Max. swing diameter over carriage: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360° / 0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions / 5° Tool turret: Number of tool stations: 12 (can be equipped with both fixed and driven tools) Turret indexing time - 1st position: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travel: Turret travel: Fgjdsx Hgl Hspfx Am Ssc X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed range: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Kondisi: bekas, Tahun pembuatan: 2011, Technical details: X travel: 410 mm Y travel: 610 mm Z travel: 500 mm Spindle speed: 15,000 rpm Taper: SK 40 Control: iTNC 530 HEIDENHAIN smart NC Table size: 320 x 320 mm Table load: 100 kg Tool changer: 48 positions Total power requirement: 35 kVA Machine weight approx.: 7.4 t Space requirements approx.: 4.15 x 3.8 x 3.28 m 5-axis simultaneous machining centre, Fsdpfx Aswlhvwem Ssgc NC rotary-swivel table, C-axis 360°, B-axis +30–120°, Chip conveyor, ICS 20 bar (internal coolant supply), 3D probe, KinematicsOpt, electronic handwheel, Operating hours: approx. 9,600 h “Machine on”, approx. 3,500 spindle hours

Kondisi: bekas, System: used piston diaphragm high-pressure pump / feed pump Fgedpsdkdi Tefx Am Ssc Type: HMD-G-50-500 Flow rate: 40.0 m³/h Pressure: 1.6 MPa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 655 mm, jarak gerak sumbu Z: 500 mm, gerak cepat sumbu X: 36 m/menit, pergeseran cepat sumbu Y: 36 m/menit, pergerakan cepat sumbu Z: 30 m/menit, produsen pengendali: Fanuc, model controller: Fanuc 0i-MD, panjang benda kerja (maks.): 400 mm, lebar benda kerja (maks.): 355 mm, berat benda kerja (maks.): 250 kg, tinggi total: 3.120 mm, panjang total: 2.995 mm, lebar total: 2.975 mm, diameter meja putar: 350 mm, kecepatan spindel (min.): 80 rpm, kecepatan spindel (maks.): 12.000 rpm, pasokan pendingin: 15 batang, daya motor spindle: 15 W, hidung spindel: ISO 40, jumlah slot dalam magazin alat: 40, panjang alat: 270 mm, diameter alat: 80 mm, berat alat: 8 g, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Pusat pemesinan vertikal BEKAS 5-sumbu dengan CNC FANUC 0i-MD Fgjdpfx Ajx N Tm Nem Sec

Kondisi: bekas, Tahun pembuatan: 2002, Maximum turning diameter: 300 mm Maximum turning length: approx. 550 mm Control system: PC Fusion CNC 640 T Standard turning diameter: 276 mm Maximum swing diameter: 525 mm Distance spindle nose to turret face: 115 - 690 mm Spindle speed range (main spindle): 35 - 4,000 rpm Main spindle drive power: 22 kW Maximum torque: 351 Nm Spindle nose: A2-6" Spindle bore: 76 mm Maximum usable bar diameter: 64 mm Maximum chuck diameter: 250 mm C-axis: 360° Number of tool stations: 12 positions Tool holder: VDI 40 Shank diameter: 25 mm Drill shank diameter: 40 mm Turret indexing time: 0.2 / 0.6 sec. Fgodpfx Aoxmagujm Ssc Speed range (driven tools): 25 - 4,500 rpm Drive power (driven tools): 3.7 kW Maximum torque (driven tools): 35 Nm Speed range (sub spindle): 35 - 4,000 rpm Drive power (sub spindle): 7.5 kW Maximum torque (sub spindle): 57 Nm Maximum chuck diameter (sub spindle): 150 mm X-axis travel: 190 (185 + 5) mm Z-axis travel: 575 (580 + 5) mm Sub spindle (B-axis) travel: 585 (580 + 5) mm C-axis: 360° Rapid traverse X/Z: 30 m/min Rapid traverse C: 400 rpm Rapid traverse B: 18 m/min Feed range X/Z: 0 - 5,000 mm/min Feed range C: 1 - 2,000 °/min Total power requirement: 34 kVA Machine weight: approx. 5.9 t Space requirement: approx. 5.0 x 3.0 x 2.5 m CNC Turning and Milling Center MAZAK - Super Quick Turn 250 MS - Main and sub spindle - Driven tools - C-axis

Kondisi: bekas, Tahun pembuatan: 1998, Technical Details: Swing diameter: 830 mm Turning length: 4,000 mm Swing diameter over cross slide: 540 mm Spindle bore: 130 mm Speed range: 2 – 1,600 rpm Rapid traverse speed: 4 / 5 m/min Feed speed: 1 – 2,000 mm/min Total power requirement: 55 kW Machine weight approx.: 7.5 t Floor space required approx.: 7 x 2.2 x 2 m Fgjdswwlt Rjpfx Am Sjc Equipped with R&D MTC-K cycle control MULTIFIX tool post, size D Coolant system

Kondisi: baru, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Max. load: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Travel ranges: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides on X/Y axis Roller guides on Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM-Type) / changer: Magazine capacity: 30 tools System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300-liter tank and pumps External coolant around spindle Chip spirals right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling control panel Electronic handwheel (wired) Central lubrication oil/air Fully enclosed Work light Heat exchanger on control cabinet Auto power off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation space: W3,160 x D3,000 x H3,000 mm (including chip conveyor discharge to the left) Machine weight: approx. 5,400 kg (net) Included special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 slots, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. wiring and Harting connector without axis driver Coolant, chip, and compressed air management: - Bed wash - Through-spindle coolant pump with 20 bar pressure, for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip bin (chip discharge front to left machine side) Measuring and monitoring systems: - RENISHAW OMP-60 touch probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage control in the machine, incl. holder - Auto-door (side door) - Pneumatic interface for workpiece clamping - Included clamping devices as shown Fedsifn N Nepfx Am Segc with RoboJob Mill Assist 25kg (Year 2025 - NEW) - Full enclosure - Double gripper Immediately available

Kondisi: bekas, Tahun pembuatan: 2013, A 4-axis CNC machining center from Spinner is available. Travel range X/Y/Z: 1600mm/810mm/700mm, rapid traverse X/Y: 18m/min, rapid traverse Z: 15m/min, table dimensions X/Y: 1800mm/810mm, max. table load: 2000kg, spindle speed: 10,000 rpm, power: 22kW, tool holder: SK40, tool stations: 24, weight: approx. 8,000kg. Documentation available. An on-site inspection is possible. Fgodpfx Amewqd R Ue Sjc

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), Penggerak Utama Jumlah spindle: 2 Rentang kecepatan spindle: 6000 rpm Jumlah sumbu: 6 Pergerakan Pergerakan sumbu-Y: ±31 mm Rapid traverse sumbu-Y: 6 m/menit Fjdjx D Rqxopfx Am Sjgc Pergerakan sumbu-B: 525 mm Rapid traverse sumbu-B: 40 m/menit Rapid traverse sumbu-C: 600 rpm Mesin NAKAMURA WT-100 6-sumbu ini diproduksi tahun 2019 dan dilengkapi dengan spindle ganda berkecepatan 6.000 rpm serta daya motor masing-masing 11/7,5 kW. Kapasitas batang sebesar Ø42 mm dan diameter pembubutan maksimum Ø190 mm. Mesin ini memiliki turret drum dodekagonal dengan 24 posisi indeks dan kecepatan rapid traverse hingga 40 m/menit. Jika Anda mencari kemampuan pembubutan berkualitas tinggi, pertimbangkan mesin NAKAMURA WT-100 yang kami tawarkan ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Pembubutan