Mesin tekuk pelat

Placke HQPB 4 60 to. x 1.550 mm

Machine is in like-new condition.

The High Quality Press Brake (HQPB) is the top model among Placke press brakes. The entire manufacturing process, from hydraulic cylinder fabrication to control cabinet assembly, takes place in-house. By combining cutting-edge technology with years of experience in forming technology, the HQPB series enables you to perform bending operations at the highest level. Even the standard version is a fully functional press brake. Thanks to this package of safety, reliability, and efficiency, paired with straightforward operation, we meet the highest standards and precision requirements in the bending process.

Machine body:
- Base machine constructed from S 355 N steel
- Side stands welded with 2 pressure pipes and an overhead oil tank
- Above-floor design
- Paint finish: 2-component textured paint, light grey (RAL 7035) and signal grey (RAL 7004)

Upper beam:
Isdjyvzkiopfx Ag Rstd
- Press beam stress-relieved annealed
- Depth measurement, reading head guided on ball bearing track
- Separate Y1 and Y2 control, electric tilt monitoring

Hydraulic system:
- Proportional control valve system with electronically monitored cylinder synchronization
- Solid steel cylinder with inductively hardened piston rod
- Low-noise internal gear pump

Tool clamping:
- Upper tool holder system WILA, hydraulic clamping system, type NSCL-II-HC, fully hardened, max. load: head-bearing = 250 t/m, shoulder-bearing = 300 t/m

Lower beam:
- Narrow table incl. manual clamping bar, dimensions: 48 mm height, 70 mm width
- Reinforced lower beam. Mechanical crowning to compensate for deflection is not required due to design.
- Single-V tool holder (13x20)
- Working height: 1050 mm (with 55 mm tool height)

Front of the machine:
2 front aluminum support arms, approx. 600 mm long, incl. 2 flip stops, measuring tape, and plastic wear strip. The support arms can be moved along a ball guide and adjusted in height for die sizes from 55 mm to 100 mm via a slotted hole. The ball guide is milled into the lower beam.

Control and regulation technology:
- Operating voltage 400V / 3Ph / 50Hz
- Switching and safety components by Telemecanique
- Rear gauge with AC servo technology
- PILZ safety PLC

Rear gauge "2-axis controlled":
- X and R axis CNC-controlled
- Z axis manual

Delem DA 66 Touch control on a swivel arm.

Safety equipment in accordance with CE standards

Technical data and working area:
Press force 600 kN
Working length 1550 mm
Clearance between side stands 1200 mm
Installation height 400 mm
Throat depth 255 mm
Ram stroke 215 mm

Ram speeds:
Rapid traverse max. 280 mm/s
Pressing speed max. 9.8 mm/s
Return speed max. 170 mm/s
Ram positioning accuracy ± 0.01 mm
Ram tilt ± 10 mm
Electronically limited to ± 5 mm
Height of lower beam above floor 947 mm
Motor power 5.5 kW

Main dimensions:
Pit depth 0 mm
Floor recess side stands 0 mm
Machine weight approx. 6.5 t
Hydraulic oil tank capacity 120 l

(Technical changes reserved)

Rear machine lighting:
Work area illuminated by an LED light strip between the side stands.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.