Mesin bor CNC 3 sumbu

Plantec UniBohrfix ML 4000mm

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut: 300 kg, Protec KT 300 H Welding Turntable, 170/400 Special Version Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Hjdpfx Ahjrypmgjwji Welding current transmission: 400 A Quick-release chuck diameter 300 mm, surcharge: €550 Quick-release chuck diameter 400 mm, surcharge: €750 Crank gear motor, stepless adjustment 0 – 90° Stepless speed control: 0.01 to approx. 5 rpm Including foot remote control Digital display with welding time limitation (optional)

Tahun pembuatan: 2020, Kondisi: sangat baik (bekas), 2 Katzengreifer EK DMR Hsdetu Nmdspfx Ahwsi

Kondisi: baru, The NEOMIG-i 500 G is a three-phase, multi-process welding machine with a separate wire feeder. Its advanced digital technology and duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergy functions simplify setup and reduce spatter during welding. Equipped with the WF wire feeder, it provides precise control over welding parameters to guarantee perfect quality. MULTI-PROCESS Hedemxkdpopfx Ahwei MIG/MAG: - Steel and stainless steel wire: Ø from 0.6 to 1.6 mm - Aluminium wire: Ø from 0.8 to 1.6 mm - CuSi and CuAl wire: Ø from 0.8 to 1.6 mm - Flux-cored wire (polarity reversal): Ø from 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile, and cellulose electrodes. TIG DC Lift / Pulsed. Gouging.

Kondisi: baik (bekas), Technical Data: Hsdjwkaalepfx Ahwoi Working width: 4050 mm Maximum bending capacity: 6.0 mm Maximum pre-bending: 4.0 mm Top roll diameter: 210 mm Side lower roll diameter: 210 mm Central lower roll diameter: 210 mm Conical bending device by tilting both side rolls Hydraulic drop-end bearing Swiveling control panel with digital display Dimensions (Length x Width x Height): approx. 6900 x 2300 x 1800 mm Net weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine’s visual appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Tahun pembuatan: 1997, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: GO 832 833, Demag ELKE overhead crane bridge crane indoor crane 2 units available!!! Capacity / lifting load: 1.6 tons / 1600 kg Span: 11,785 mm, overall width approx. 12,000 mm Year of manufacture: 1997 with pendant control Lifting height: 3 m Overall height (top of crane girder to bottom of hook): approx. 900 mm End carriage length: approx. 200 cm The crane is dismantled and immediately available. Suitable conductor rails can also be supplied. Please inquire. Very good condition, inspection logbook is available. Column-mounted slewing cranes and wall-mounted slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight carrier possible—you are welcome to inquire with your postal code. Collection preferred. Hedpsum I Akefx Ahwei

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, jangkauan lengan: 1.300 mm, The perfect package for your welding automation featuring the latest UR10e robot series – please do not purchase any more CB series. Hodpfx Aot S U Auohwji Are you looking to automate your welding operations with a collaborative robot to tackle future challenges? The OH-au2mate Cobot Welding Solutions with Lorch power source is exactly what you need! This perfectly coordinated package combines: - High-quality robot technology from the market leader Universal Robots - Innovative welding technology from Lorch - Intuitive operating software Package contents in detail: UR10e robot ready for welding, control elements, torch holder, Translas 8XR fume extraction torch, Lorch S5 400A welding power source.

Kondisi: baru, Tahun pembuatan: 2024, CNC drilling/milling machine Kudu with CNC control and tool changer (3-axis) Hsdpofu Ivzsfx Ahwei Drilling and milling machine with a movable machining unit – the table remains stationary while the drilling head moves. The drilling machine can be operated both manually and fully automatically. After each drilling operation, the machining unit automatically moves to the next drilling position in the X and Y axes. Operation is highly user-friendly. Data can be transferred to the machine control system via DXF/DWG file formats through a programming workstation. Alternatively, programming can also be done directly at the machine’s control panel. The machine is extremely robust, comprising proven machine components. Technical specifications: • Measuring length: 6,000 mm • Overall length: 8,050 mm • Sturdy machine base • Spindle speed: up to 2,500 rpm (standard version), supplied with the appropriate speed for your application • Tool holder: SK 40 • Drive of X, Y, and Z axes by servo motors • Rapid traverse X-axis: 20 m/min • Rapid traverse Y-axis: 5 m/min • Distance table surface – lower edge of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on tool) • Tapping: M4 – M30 (with compensating chuck) • Machining travel Y-axis: 300 mm • Tolerance X-axis: ±0.1 mm • Tolerance Y-axis: 0.06 mm • Tolerance Z-axis: 0.06 mm • Spindle drive: 5.5 kW • Machine weight: 2,300 kg • Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Pneumatic connection: 8 bar • Safety: front light curtain, rear access protected by safety fence • Control: 21.5" touch-screen panel with reinforced front glass • Easy programming directly at the machine • Milling of elongated holes and circles • Lubrication via minimum quantity spray system • Without material clamps • Remote maintenance via TeamViewer possible (LAN interface) • Tool magazine for drill tools, including dimensions and speed • Workflow simulation • Digital handwheel Your advantages: • Workpiece surfaces are protected • Clear, graphical user interface • Easy processing even at the ends of workpieces • 50% floor space saving compared to moving table designs • Chips collected in chip tray • Simplest programming and operation • Minimum quantity lubrication system (standard) • Programming errors excluded thanks to CAD/CAM You are welcome to inspect the desired machine at any time in our manufacturing/demo hall. Please contact us to arrange an appointment. Plantec Maschinen GmbH

Kondisi: baru, en-GB: Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m Hodpfsd Iipxsx Ahwei SPECIAL OFFER PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Kondisi: baru, Bandsaw NEBES TM 275 – 400 V Three-phase NEW “CE” Induction motor Cast iron frame Adjustable cutting angle from 0° to 60° Entirely cast iron structure Electric pump for blade lubrication and cooling Oil-bath blade tension gauge Front-mounted controls and two cutting speeds Coolant pump exclusion switch Blade guide with hard metal (H.M.) pads Round cutting capacity 0°: 220 mm Square cutting capacity 0°: 200 x 200 mm Rectangular cutting capacity 0°: 230 x 185 mm Round cutting capacity 45°: 150 mm Square cutting capacity 45°: 150 x 150 mm Rectangular cutting capacity 45°: 150 x 200 mm Round cutting capacity 60°: 90 mm Square cutting capacity 60°: 90 x 90 mm Rectangular cutting capacity 60°: 90 x 120 mm Power: 1.3 HP Voltage: 400 V Hsdpfx Ajh Nm Ncjhwei Blade dimensions: 2450 x 27 x 0.90 mm Weight: 265 kg

Kondisi: baru, Tahun pembuatan: 2024, UNIBOHRFIX 100 H Fully Automatic Drilling Machine, Measuring Length 6000mm Item No. 6020 With the fully automatic drilling machine UniBohrFix 100, your material is positioned along the X-axis at the desired location, clamped, and drilled. All you need to do is press the start button. The horizontal gripper of the positioning system allows for easy pneumatic clamping of round tubes, rectangular tubes, angle profiles, as well as flat and solid materials. After quickly entering your X-values or recalling an already programmed sequence, the machine operates completely independently. The Y-axis can be set by the operator using the handwheel with digital readout. Advantages: • A sequence of holes is drilled automatically at precise intervals. • Operator errors are significantly minimized. • Programming is completed in just a few minutes. • Excellent price-performance ratio. • Significant reduction in required labor. Fully automatic version Measuring length: 6,000 mm Total length: 13,500 mm NC single-axis control Pneumatic clamping chuck (clamping range 200 mm) Minimum quantity spray system with holder and spray nozzle Drilling machine: Unimax 3T AV (technical specifications – see data sheet) Anti-rotation device Motorized height adjustment Thread cutting unit NC Positioning System PD 200p Feed force 200 kg Positioning by absolute and incremental measurements possible Carriage with DC servo motor and encoder Carriage with 12 ball bearings Pneumatic stop clamping with high retention force Steel guide rail with precision rack Steel beam profile for contamination protection Infeed and outfeed roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm Hedpfx Aefu Itbehwsi Load capacity: 200 kg/m Rollers height-adjustable Mounting brackets Roller width: 407 mm Insert plates Struts Roller diameter: 50 mm Steel rollers Plantec Maschinen GmbH