Mesin pembuat kaca isolasi

PointSpacer Hot Press

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, daya: 160 kW (217,54 hp), tegangan masuk: 380 V, masa garansi: 12 bulan, tahun perombakan terakhir: 2023, Perlengkapan: dokumentasi / manual, 1 Pellet press brand: Buhler DPAB Die inner diameter: 660 mm Die running surface: 138 mm Press is equipped with 1 motor, 160 KW. Press door is made of stainless steel and features an overload flap in the door. 2-roller pellet press with 2 rollers on the press, overhauled in either a dimpled or grooved design. Press is complete with die lifting device and tools included. The press has been fully refurbished and fitted with new bearings and wear parts, Rsdorah Evopfx Ad Ror such as front and rear scrapers, die retaining ring, etc. Also fitted with new V-belts. All safety requirements will be observed and suitable switches for friction protection, door safety switch, and inspection hatches will be installed.

Kondisi: baru, de_Bester Preis 4499 EUR (EXW Jonava, Litauen) Redpfx Ajdnxyded Rer Abmessung des Schiebetisches: 2200 x 375 mm Max. Schnittkapazität: 1500 mm Schnittbreite zwischen Sägeblatt und Parallelanschlag: 1140 mm Sägeblattdurchmesser: 400 mm Schnitthöhe (90°): 115 mm Schnitthöhe (45°): 105 mm Drehzahl der Hauptsäge: 4500/6000 U/min Durchmesser der Hauptspindel: 30 mm Sägeblatt schwenkbar: 0-45° Elektrisch gesteuerte Sägeblatthebung/-senkung Hauptmotor: 5,5 kW Vorritzsägeblatt-Durchmesser: 120 mm Drehzahl der Vorritzsäge: 7000-8000 U/min Vorritzsägendurchmesser (Achse): 20 mm Vorritzmotor: 1,1 kW Gewicht: 700 kg * Bei Verwendung des 400-mm-Sägeblatts muss das kleinere entfernt werden. Ein reduziertes Sägeblatt darf nur mit einer maximalen Hauptschutzabdeckung von 350 mm verwendet werden.

Kondisi: sangat baik (bekas), Perlengkapan: doser, Penyesuaian listrik untuk ketinggian dan sudut mata gergaji; pisau scoring. Anda dapat menelepon atau menulis kepada kami. Kami dapat berbicara dan menulis dalam bahasa Jerman dan Rusia. Anda juga dapat mengirim pesan dalam bahasa Inggris. Rsdpfxjw Ix Als Ad Rer

Kondisi: baik (bekas), Tahun pembuatan: 1990, daya: 5,5 kW (7,48 hp), ketinggian potong (maks.): 140 mm, lebar pemotongan (maks.): 1.000 mm, panjang meja: 1.400 mm, Types: F 45, Machine no.: 90-8-86 Rjdpotxh Nisfx Ad Rsr

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X-axis: 4,300 mm X-axis pendulum operation: 1,620 mm Y-axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X-axis: 3,300 mm X-axis pendulum operation: 600 mm Y-axis: 1,240 mm Work table: 8 ATS workpiece supports, each with 3 vacuum cups 8 rear workpiece stops, retractable via program, integrated in each support 8 workpiece stops, 670 mm from rear, integrated in each support 2 + 2 lateral workpiece stops 4 removable center stops 6 pneumatic lifting rails, retractable via program, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups EPS (Electronic Positioning System) Automatic central lubrication Division of the vacuum system into 2 separate working zones in X direction Auxiliary vacuum system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 m³/h Machining head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, each individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, 120 mm diameter fixed in X direction Grooving saw, 120 mm diameter fixed in Y direction Routing spindle 13.2 kW (11 kW S1-duty), HSK 63 F Mounted on Z1 axis Speed range 1,000–24,000 rpm Right and left rotation Rjdpfx Adjxraime Rer C-axis 360 degrees for aggregate adapters Cleaning nozzle for cleaning the milled edge prior to the edge banding operation Tool magazine for 16 tools Edge banding unit suitable for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360° infinite rotation Glue application for hot melt adhesive Double pressure roller, exchangeable and disconnectable Heating lamp for pre-heating edge material End trimming unit for cutting edge material at an 8-degree angle to the workpiece edge using a circular saw blade Technical Data: Plastic edge thickness 0.4–3 mm (*) Solid edge thickness 0.4–2 mm (*) (Best results are achieved using wood edges with primer, 0.4–1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. internal radius 18 mm, for edge thickness below 1 mm Min. internal radius 30 mm, with edge thickness 2 mm Minimum panel size for edging 300 x 300 mm Minimum internal cutout size for edging 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine, this solution restricts pendulum operation. Roll diameter of edge material: 800 mm Safety features: * Pressure-sensitive mats in front of the machine * Protective fence on the right with access door No tools included Control: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Aggregates: - Flush/Radius milling aggregate - Combination unit profile/flat scraper blade - Sawing aggregate

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, tahun perombakan terakhir: 2023, For sale: a complete and fully operational steel sheet roll forming line, suitable for processing coil materials such as Magnelis into any desired profiles, such as C-profiles commonly used in photovoltaic installations and farms, steel hall construction, shelters, as well as for furniture manufacturing, etc. Rodpfxou A U Uts Ad Rer The line, including an uncoiler, is installed in a heated hall under near-laboratory conditions. Prospective buyers can arrange for a test run prior to purchase. I have contacts to suppliers of profiling roll sets for specific profiles, as well as to companies specializing in machine upgrades and expansions. Further information strictly by phone only – I do not respond to written messages. A VAT invoice will be issued for the production line. Location: Poland, near the Ukrainian border (city: Krosno).

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 265864, diameter pembubutan: 350 mm, kecepatan spindel (maks.): 5.000 rpm, kecepatan spindel (min.): 35 rpm, jarak pergerakan sumbu X: 195 mm, jarak gerak sumbu Z: 560 mm, daya motor spindle: 15 W, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan sumbu Z: 33 m/menit, torsi: 233 Nm, jarak dari tengah meja ke hidung spindel: 687 mm, Perlengkapan: dokumentasi / manual, Mazatrol Smart-Steuerung. Rodpfx Aevfm H Aed Rsr Spindeldrehzahl: 5.000 min⁻¹. Verfahrweg X/Z: 195 mm / 560 mm. Ausgestattet mit einem Spannfutter, Ø 215 mm. 3-Backen-Kraftspannfutter. 12-fach Revolver. Reitstock. Werkzeugvermessung. Teilefänger.

Kondisi: baik (bekas), BRANDT Highflex 1440 Edgebander Well-equipped, available for inspection before purchase. Pre-milling cutters Glue application Pneumatic pre-cut guillotine Rsdpfx Adjt Hxxps Rer Pressure rollers Finishing saws Top and bottom pre-milling unit 2 x multi-function milling units Profile scraper Flat scraper Polishing unit The machine features NC control for the milling units and a pneumatic package. Max workpiece height: 60mm Max edge tape thickness (coil): 3mm Feed speed max: 14m/min Well-maintained machine, in very good condition.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10006565, Weinig Powermat 1500 Working width: 30 - 310 mm (with tool flying circle 93-125 mm) Working height: 100 - 200 mm (with tool flying circle 93-125 mm) Number of spindles: 6 Bottom spindles: 2 Right spindles: 1 Left spindles: 1 Top spindles: 2 Spindle arrangement: bottom-right-left-top-top-bottom Maximum spindle speed: 8,000 rpm Spindle diameter: 40 mm Powerlock tool holder Rsdpfx Ajrq Ebfod Rer Including beveling unit Separate motor for each spindle Electronic feed including brake, steplessly adjustable 5-40 m/min Durofer pointed-tooth feed rollers Short infeed table, 1.2 m long, with 2 powered rollers above the table Machine table surface with hard coating Manual lubricant pump WEINIG Comfort Set Control system: WEINIG MEMORY PLUS-SYSTEM CE marking Declaration of conformity

Kondisi: baik (bekas), Tahun pembuatan: 2005, URBAN Welding and Cleaning Line type CC 16/43-26/23 consisting of Welding Machine AKS 1600 and Cleaning Machine SV 430. Redpfxjvyqbme Ad Rjr