Mesin pengelasan jaring

PRATTO SW PE 3000-61

Kondisi: sangat baik (bekas), 2 - Mesin Las Kepala Urban AKS 4110 bekas - Pisau Nirosta berpemanas atas - Pisau Nirosta berpemanas bawah - Batas garis las: 0,2 mm - Panjang pengelasan maks. 3,25 m - Satu set lengan penyangga Fedpfxjykp Dxj Am Segc

Tahun pembuatan: 1978, Kondisi: sangat baik (bekas), Technische Daten: Fedpfx Aelf Iqnjm Sjgc -Hersteller: DRAWEBA -Modell: DDANS 17 l -Baujahr: 1978 -Drahtdurchmesser: 1,4 - 1,6 mm -Maschenweite (min.): 10 x 10 mm -Netzbreite: 1600 mm

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, tahun perombakan terakhir: 2025, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Fgjdpfx Ajvf E Avem Ssc Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, canon-imagepress-c9010-vp-en Fsdpfx Asu Ecl Ejm Segc

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, For sale is a welding robot system with the following components: Elite Robot CS620 (1750mm reach) with programming flange and software Fronius TPSi 500 Fsdpfx Aov Dvllom Segc rotateZERO 500 positioner with 1800mm x 800mm intermediate frame Machine base frame The system is immediately ready for welding.

Kondisi: baik (bekas), Tahun pembuatan: 1998, Battenfeld 600/200 CDC Unlocking force: 4000 kN Clamping force: 60 tons Fedpfx Aog Emvhjm Segc Year of manufacture: 1997 Screw diameter: 30 mm Shot weight approx. 90 g

Kondisi: baik (bekas), Tahun pembuatan: 2020, de_Maschine Masterwood Project 351 L – 3-Achs CNC-Bearbeitungszentrum Beschreibung - Luftgekühlter 3-Achs-Fräsmotor, 17,5 PS (HSK-63F) - Statischer Frequenzumrichter zur programmierbaren Drehzahleinstellung 1.500–24.000 U/min - Werkzeugwechsler mit 22 Positionen - 6 pneumatische, absenkbare Anschläge für das Beladen/Ausrichten schwerer Werkstücke - Vorbereitung zur Montage von Spannsystemen - 2 horizontale Klemmzangen für Brettschichtholz - 6 Nullpunktabfragen entlang der X-Achse (Positionierung der Platten auf der Rückseite der Auflagen) - 8 Nullpunktabfragen entlang der X-Achse (Positionierung der Platten mittig der Auflagen) - Komplette Referenzierung auf der rechten Seite entlang der Y-Achse - Komplette Referenzierung auf der linken Seite entlang der Y-Achse - 2 Arbeitsfelder - 1 x 100 m³ Vakuumpumpe - 24 Vakuumsauger - Fernbedienung mit Digitalanzeige - Automatisches Werkzeugvermessungssystem - Transportband für Späne/Abfall - Bohraggregat mit 19 Spindeln (32 mm-Achsabstand), 2,2 kW - 7 vertikale Bohrspindeln in X-Richtung - 6 vertikale Bohrspindeln in Y-Richtung - 4 horizontale Bohrspindeln in Y-Richtung - 2 horizontale Bohrspindeln in X-Richtung (Alle Bohrspindeln einzeln programmierbar) - Steuerungseinheit inkl. PC - SINCRO CAD/CAM-Software MASTERWORK Technische Daten Arbeitsbereich X: 5.130 mm Arbeitsbereich Y: 1.550 mm Verfahrgeschwindigkeit X/Y: 80 m/min Verfahrgeschwindigkeit Z: 25 m/min Max. Werkstückhöhe: 200 mm Fräsmotorleistung: 17,5 PS (S1) Drehzahl Fräsmotor: 1.500–24.000 U/min Bohraggregat: 3 PS Werkzeugsystem: HSK63-F Werkzeugplätze: 22 Vakuumpumpe: 100 m³ Absaugstutzen: 250 mm Luftförderleistung: 4.500 m³/h Luftgeschwindigkeit: 30 m/s Fedpfxovu U Ito Am Sjgc Druckluft: 7 bar Druckluftverbrauch: 300–500 l/min Absicherung: 40 A Gewicht: 7.000 kg (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Kondisi: bekas, Tahun pembuatan: 2021, jarak pergerakan sumbu X: 1.600 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 740 mm, produsen pengendali: Fanuc, model controller: Series 0i-MF Plus, diameter benda kerja (maks.): 800 mm, tinggi total: 3.435 mm, panjang total: 5.575 mm, lebar total: 4.621 mm, berat keseluruhan: 18.000 kg, Perlengkapan: dokumentasi / manual, Victor Vcenter-AX800II Fgsdpfxeygw E Nj Am Sec CNC 5-Axis Vertical Machining Center CNC Control: Fanuc Series 0i - MF Plus Table Diameter: Ø 800 mm Number of Pallets: 1 Max. Workpiece Diameter x Height: Ø 1200 x 300 mm Travel Range X-Y-Z Axis: 1600 x 700 x 400/740 mm C-Axis (Table Rotation): 360° B-Axis Travel: -11 / +30° Spindle Speed: 15,000 rpm Spindle Taper: Big Plus BT40 Spindle Motor: 18.5/15 kW Tool Magazine Capacity: 60 If you have any questions about this machine, please do not hesitate to contact us by phone or email. Feel free to browse our other listings for a complete overview of our inventory.

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, de Fedpfx Aem E I D Hsm Ssgc

Kondisi: bekas, Tahun pembuatan: 2005, Used machine Year of manufacture: 2005 Equipment and technical specifications: - Base machine 555 - Working dimensions for edge processing: Fedpfx Amjx Enpqo Sogc - X = 3514 mm - Y = 1544 mm - Maximum working dimensions: - X = 3868 mm - Y = 1746 mm - Z = 325 mm - Workpiece support with 8 pneumatically clamped consoles - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in X-axis and 6 in Y-axis - individually selectable - T-shaped arrangement - Max. drilling diameter: 35 mm (depending on panel thickness) - Spindle travel: 70 mm - Rotation direction: alternating right/left - Speed: 4,725 rpm, steplessly adjustable - 2 horizontal drilling units in X direction, 1 horizontal drilling unit in Y direction - Saw unit 7946: - Motor: 3.5 kW - 90° pneumatically swivelling - Speed: 5,300 rpm - Tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm - Sawing/grooving in X and Y directions - Milling unit 7935: - with 6 kW spindle, water-cooled - Milling unit 7982: - for lock case milling - Tool changer 7996: - 18-position magazine (carousel type) - Vacuum pump with 140 m³/h - Handheld control unit - PC control with TwinCAM WOP system - Siemens control Availability: short-term Location: 63934 Röllbach