Mesin pemotong dan penebuk untuk profil aluminium

Pressta Eisele Säge-Stanzanlage

The machine is connected to power and can be inspected by appointment!

Technical Data / Machine Components:
Year of manufacture: 12/2009
Make: PRESSTA-EISELE
Voltage: 400 V
Rated current: 19.2 A
Operating pressure: 250 bar
Dimensions: approx. 18–20 m long, approx. 3 m wide
Weight, unpacked: 4.5 to 5 t

Horizontal Loading Magazine:
5-strand toothed belt conveyor, toothed belt width 32 mm, with teeth on the running side
17 compartments, each 90 mm wide, for holding profiles, with carrier 40 x 10 mm (H x W)
2 sliding supports between the toothed belts as additional support
Max. depth: 2,380 mm, length: 7,400 mm
Max. loading weight: 1,000 kg
Conveying length: 1,850 mm
Minimum profile length: 1,000 mm
Maximum profile length: 7,300 mm
Bodpfjzbac Tox Ad Rodf
Common drive via geared motor: 0.55 kW, 400 V, 50 Hz
Conveying speed: 4 m/min
Material stop left
'Magazine empty' sensor, manual step
Touch switch for initial loading
5 pneumatic cylinders for aligning profiles in the longitudinal direction
6 lifting rollers for raising the profile from the loading magazine and transferring to the pusher

Pusher, electronically positionable feed system:
Reinforced design
Max. feed length: 9,000 mm
Mounted on the right side of the machine
Profile feed from right to left
Guide profile with linear guide rail
Carriage plate construction with recirculating ball bearings
Drive via linear motor, positioning via magnetic tape
Pneumatic material gripper
All 8 profiles can be automatically clamped without manual adjustment
Repeat accuracy: +/- 0.15 mm
Max. rapid traverse speed: 180 m/min
Input of the profile tube length in the control system
1 light barrier for detecting the profile start before the first punching head

Punching Unit:
Hydraulic drive
Punching force per cylinder: 3.0 t, designed for 55 punches per minute
Maximum of 2 tools in operation
Vertical punching head with 2 cylinders
Punching stroke 15 mm, incl. 2 punching tools for Ø 6.5 mm holes, 65 mm pitch
Punching cylinders can be individually actuated, guide for profile
2 horizontal punching heads
Punching stroke 15 mm, each incl. 1 punching tool for Ø 6.5 mm hole and 1 punching tool for slotted hole 7 x 12 mm, guide for profile
Cycle spray unit with 4 nozzles for punch lubrication
3 l oil tank, fill level monitoring

Saw:
Drive 5.5 kW, 400 V, 50 Hz
Saw blade Ø 500 mm
Saw feed pneumatic with hydraulic control, from below
Pneumatic profile clamping device vertical and horizontal
Cycle spray unit with one nozzle
Flap after the saw for removal of cut-offs and residual pieces, max. length 200 mm
Parts fall down into the provided container
Longer residual pieces are disposed of together with good parts

Dot Peen Marking System:
Marking size 2 – 7 mm
Marking window 80 x 20 mm, 15 characters incl. spaces
Marking always approx. 190 mm after the saw cut
Data transfer from an Excel file via interface
Each profile can have a different designation

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.