Gunting bundar

Prinzing KSE 25/10

Kondisi: diremajakan ulang (bekas), Maximum pressing force: 180 kN (18 tons). Strokes per minute: 100 to 600. Maximum strip width: 60 mm. Maximum feed length: 60 mm. Maximum strip thickness: 2 mm. Adjustable stroke: 4 - 36 mm. In very good condition. Bwedpfx Ajfmavxsbheh Programmable speed and number of strokes. Three operating modes: manual, single stroke, and automatic. Pneumatic clutch and brake. Machine comes with a 6-month warranty. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx. 1.2 tons. Power consumption: 2.2 kW. Required air pressure: 8 bar. More high-speed presses in stock by Bruderer (models BSTA 18, 20, 30, 200, 50), as well as Schaal and Mabu presses.

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Bwjdsfzktzspfx Abheh Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, daya laser: 12.000 W, ketebalan pelat baja (maks.): 80 mm, ketebalan lembaran kuningan (maks.): 80 mm, panjang meja: 3.000 mm, lebar meja: 1.500 mm, jarak pergerakan sumbu X: 1.550 mm, jarak lintasan sumbu Y: 3.050 mm, jarak gerak sumbu Z: 290 mm, berat benda kerja (maks.): 1.400 kg, tegangan masuk: 380 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, panjang total: 9.100 mm, lebar total: 3.120 mm, tinggi total: 2.200 mm, masa garansi: 24 bulan, jangkauan kerja: 3.015 mm, Perlengkapan: alat penukar nosel, dokumentasi / manual, ekstraksi asap, ekstraksi debu, henti darurat, penghadang cahaya keselamatan, sistem pelumasan terpusat, unit pendingin, Brand new Full-Cover Fiber Laser Cutting Machine | GS-CE/ GS-CE PRO Series | 3,000–60,000 W MACHINE AVAILABLE IN STOCK This FULLY ENCLOSED FIBER LASER CUTTING MACHINE from the GS-CE Series delivers maximum safety in metal cutting operations. Thanks to its full enclosure and observation window made of protective glass, you can monitor the process while avoiding hazards such as laser radiation, sparks, and more. The machine features a fast-exchange table, allowing table changes in just 10 seconds. This is your ideal solution for safe and efficient metal cutting! Working table sizes: 3000 mm × 1500 mm, 4000 mm × 1500 mm, 6000 mm × 1500 mm, 6000 mm × 2500 mm; Laser power: 6 kW–80 kW CNC system: FSCUT Max. acceleration: 4G Bsdpfx Abjub Nwdshewh BOCI cutting head Intelligent anti-collision function Automatic lubrication Schneider relay Laser fault alarm Chiller alarm Laser protective glass Water chiller TÜV CE certificate Optional feature: automatic loading and unloading system The control unit supports graphic formats: AI, BMP, DST, DWG, DXF, DXP External programming System complete incl. chiller, extraction system, and safety light barriers Showroom machine, as new

Tahun pembuatan: 2022, Kondisi: baru, Ostas 3-Roller Plate Bending Machine SBM 1270 x 95 Special Equipment Included in Price: - Hardened rolls - Motorized rear roll adjustment - Digital display Features: • Asymmetric 3-roller plate bending machine with motorized drive • Hardened rolls • Motorized rear roll adjustment • Digital display • Swing-out upper roll • Cone bending device • Foot switch Technical Details: • Sheet width: 1270 mm • Sheet thickness: 3.0 mm • Roll length: 1270 mm • Roll diameter: 95.0 mm • Minimum bending diameter: 140.0 mm • Motor power: 1.1 kW Bwodpfx Abjg Tzbhoheh • Dimensions (LxWxH): 2100 x 760 x 1250 mm • Weight: 470 kg

Kondisi: baru, Tahun pembuatan: 2025, PROFIL BENDING ATTACHMENT PB20 The ideal supplement for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be mounted quickly and easily onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping device and pulled around the bending tool. With this system, the length of the legs to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy during bending. TECHNICAL DATA: Bwedenh R Ekspfx Abhsh • Bending capacity (Steel 37): 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radii R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production in our in-house demo room • On-site consultation and informational meeting at your location • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your facility

Tahun pembuatan: 1979, Kondisi: bekas, Outreach: 22/29 mm Drive motor: approx. 0.55 kW at 380 V Required space: 450 x 500 x 560 mm Weight: approx. 6.5 kg Bwsdpezif Sjfx Abhoh Pressing force: 30 kN

Kondisi: baru, Tahun pembuatan: 2025, diameter rol: 140 mm, panjang rol: 1.570 mm, - Capacity 1570 x 4.5 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamping) - Digital display for rear roller movement - Digital display for bottom roller movement (material clamping) - Hardened rollers - Conical rolling - Brake motor - Emergency stop Bodjgg Nv Iepfx Abhjwh - Documentation - 400V

Kondisi: bekas, Tahun pembuatan: 1987, en:Technical Details: Press force: 200 t Bending length: 4000 mm Distance between uprights: 3530 mm CNC control: DNC 7000 Max. stroke: 220 mm / min: 200 mm Throat depth: 320 mm Rapid approach speed: 70 - 80 mm/sec Working speed: 10 mm/sec Return speed: 49 mm/sec Backgauge: 700 mm, motorized Table dimension (L x W): 4110 x 180 mm Working height: incl. table extension mm Interface: RS 232 Connected load: 380 V Total power requirement: 15 kW Approx. machine weight (total): 17.0 t Machine dimensions (L x W x H): 4.6 x 1.6 x 3.3 m Heavy-duty welded steel frame Available operating modes: manual, semi-automatic, fully automatic incl. 2 table extensions Back support: 700 mm travel, motorized, and 2 support brackets with 1500 mm travel, motorized right/left Operation via control panel with emergency stop and electric foot pedal Bwodpfeu Icc Aex Abheh Hydraulics: max. pressure 318 bar; oil capacity approx. 170 liters; pump capacity 19.3 l/min Control: DNC 7000, graphic display, PC software Equipment/features: Cutting zone lighting Stroke counter Tools optional

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 527, 23035 Technical specifications (approx.): - Punching force 30 T - Max. sheet thickness 10 mm - Max. punching diameter 105 mm - Punching capacity: Bodpfxjlnkc Uj Abhewh - e.g., steel sheet: 105 mm in 1.5 mm; 45 mm in 5 mm - e.g., stainless steel sheet: 90 mm in 1.5 mm; 45 mm in 4 mm - Stroke 7 – 70 mm - Throat depth 560 mm - Max. number of strokes 120 SPM - Single stroke / continuous stroke - Drive 400 V / 4 kW - Space requirement approx. W 8000 x H 1850 x D 1700 mm - Weight approx. 1900 kg - Equipped with: - back gauge table with stops - foot switch - emergency stop button - quick-change punch tool device - various punch and die holders

Kondisi: baru, Fastech 3-Roller Plate Bending Machine FRM 1250 x 90 Technical Specifications: Special equipment included in the price: - Hardened rollers - Motorized adjustment of the rear roller - Digital display Sheet width: 1250 mm Sheet thickness (max.): 3.0 mm Pre-bending thickness: 2.5 mm Roller length: 1250 mm Roller diameter: 90 mm Smallest bending diameter: 130 mm Weight: 500 kg Dimensions (L x W x H): 1950 x 900 x 1130 mm Motor: 1.1 kW Bedpohzq Dqefx Abhewh Equipment: - Electrically driven upper and lower rollers - Swiveling upper roller - Cone bending device - Asymmetrical roller arrangement - Self-braking main motor - Separate control and operation panel - Safety cable Values apply to St-37 / 240 N/mm² CE marking