Mesin penggiling permukaan

PROTH PSGS 3060 BH / S+

Kondisi: bekas, Tahun pembuatan: 2008, Vertical Turning and Grinding Center Manufacturer: EMAG Model: VSC 250 DS Year of manufacture: 2008 Control system: SIEMENS 840D Grinding spindle speed: 30,000 rpm Turning spindle speed: 3,000 rpm Turret tool stations: 12 Chiller unit for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling Air through spindle Ljdpfx Ageia Rtdslshb Two clamping circuits through spindle (air and oil) Please note: The grinding spindle is defective but can be overhauled at a spindle repair facility. Apart from that, the machine is in very good condition and fully functional. Please contact us for further information and pictures via mail(at) or *

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing Lhjdeqt Dmyspfx Agljb - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level.

Kondisi: baik (bekas), Tahun pembuatan: 2001, panjang penggilingan: 650 mm, lebar penggilingan: 525 mm, tinggi total: 350 mm, panjang meja: 600 mm, lebar meja: 350 mm, Manufacturer: Geibel & Hotz Model: FS 635-Z SA Control: Digital readout Year of manufacture: 2001 Magnetic table 600 x 350 mm Closed housing for CE compliance Vertical automatic feed (SA) Automatic lubrication Coolant tank Specifications Metric US Standard X-axis travel: 650 mm Y-axis travel: 525 mm Z-axis travel: 350 mm Table length: 600 mm Table width: 350 mm Table load capacity: 400 kg Feed rate X-axis: 35,000 mm/min Feed rate Z-axis: 1,000 mm/min Grinding wheel size: 300 x 50 x 76.2 mm Motor power: 3.7 kW Spindle speed: 2,800 rpm Dimensions (approximate) Length: 3,200 mm Width: 2,000 mm Height: 2,870 mm Weight: 2,300 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, wherever possible, supplied by the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, this information does not constitute representations or contractual terms. We recommend independently verifying all important details. Lsdpfx Agovdal Aslehb

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, panjang total: 620 mm, mechanics-all wear parts of the machine are replaced, including the X-axis adjustment spindle. All assemblies are brought to a like-new condition. After the overhaul, the machine is comparable to a new one. Ljdpjurw Uyjfx Aglshb geometry-the machine is completely disassembled down to the guideways. Before restoring the geometry of the individual tables and assemblies, both X- and Z-axis guideways are hand-scraped and restored to an as-new condition. Upon completion, the machine receives a measurement protocol according to manufacturer specifications. painting-after the geometry restoration, the machine is prepared for repainting. All housings, tables, and the machine bed are stripped of old paint, cleaned, and repainted. hydraulics-the entire lubrication system, including lubrication unit, is replaced. The hydraulic unit is also completely overhauled. conventional internal cylindrical grinding machine TSCHUDIN HTG 610I equipment of the machine: technical data: center height: 150 mm distance between centers: 680 mm grinding length: 620 mm machine weight and required space: 2,500 kg // 2,340 x 1,445 x 1,900 mm equipment of the machine (standard): 1 pc. workpiece spindle head MK5 1 pc. control panel 1 pc. mount for internal grinding spindle 1 pc. speed control device for belt spindle (UJ50 / UJ80) FISCHER 1 pc. hydraulic unit optional: • digital 2-axis measuring system • freely adjustable speed (1–800 rpm) including soft start (higher speeds optional upon clarification of technical details) • separate low-speed setting for part alignment

Kondisi: baik (bekas),

Kondisi: bekas, Tahun pembuatan: 1969, en-001 Ljdpfst Hwzisx Agljhb

Kondisi: baru, The RSM 500 A is a conventional cylindrical grinding machine from the grinding machine category, distinguished by its robust construction and extended, supportive guideways. Its heavy machine base made of high-quality cast iron provides maximum stability and precise grinding results. The swiveling table and finely adjustable hydraulic feed ensure smooth operation, while large scale dials on the X-axis handwheel facilitate accurate infeed. These features are complemented by a standard position display with linear scales, allowing straightforward monitoring of actual values. Versatile applications such as internal and external cylindrical grinding as well as taper grinding are supported by the hydraulically adjustable workhead. The standard delivery includes comprehensive accessories, such as an internal grinding device and a work lamp. Benefit from the high performance and precision of the RSM 500 A – inquire now and optimize your grinding projects! Lhjdpfx Aencdx Noglob

Kondisi: bekas, Tahun pembuatan: 2016, de-001 Lhedsxb Edzopfx Agleb

Kondisi: bekas, Tahun pembuatan: 1969, Wheel diameter – max. 160,175 mm Wheel width 355 mm Module – max. 4.5 Spindle bore 75 mm Centre distance (between centres) 410 mm Number of teeth – min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece – max. 138 mm Centre distance between cutter and workpiece – min. 30 mm Milling head – swivelling 120° Cutter speeds 70 – 400 rpm Axial feeds 0.25 – 4.0 mm/rev Radial feeds 0.09 – 1.5 mm/rev Total power requirement approx. 9.5 kW Lhodpfovzhf Sjx Agleb Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, en-GB: Universal Milling Machine Deckel FP2, repowered by FPS, year of manufacture 2013, with 3-axis digital readout Heidenhain ND 780 - As New Condition!! Technical Specifications: - Machine No.: 2202-7020, FPS No.: 3364, Year: 2013 - Fixed angle table - Spindle speed: 40 - 2,000 rpm - Feed and rapid traverse on 3 axes - Drive power: 2.2 kW Lhsdpovbifgsfx Agljb - Travel X/Y/Z: 400 / 200 / 400 mm - Features: Vertical and horizontal spindle - Extendable vertical and horizontal quill - SK 40 - Drawbar system S20x2 - Weight approx. 1,100 kg Accessories and Equipment: - 3-axis digital readout Heidenhain ND 780 - Brake motor for immediate spindle stop - Centralised lubrication - 2 x emergency stop buttons - Operating manual - Coolant system About the machine: Offered here is a Universal Milling Machine Deckel FP2 repowered by FPS, in almost new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has automatic centralised lubrication, and for safety is fitted with two emergency stop switches. Status as of 2013. Mechanically and electrically tested. The Heidenhain digital readout makes machining easier and even more precise. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available.