2023 ProGrinder mesin gerinda meja

Q-FIN ProGrinder

Kondisi: bekas, Tahun pembuatan: 1999, Technical Details: Drilling capacity in steel (diameter): 32 mm Throat depth: 293 mm Drilling stroke: 120 mm Drilling capacity in cast iron: Ø 38 mm Spindle taper: MK 3 Spindle overhang: 293 mm Spindle speed: 160 – 2250 rpm Feed: 0.10 – 0.20 mm/rev, manual and automatic Max. distance spindle/table: 55 - 642 mm Table clamping surface: 300 x 300 mm Drill table adjustment: yes Bsdpfx Ajva Hmrehwjcw Column diameter: 115 mm Distance spindle center to base plate: 1207 mm Total power requirement: 1.9 kW Approx. machine weight: 280 kg Approx. machine dimensions (LxWxH): 0.7 x 1.0 x 1.9 m Pillar drilling machine with stepless speed adjustment and automatic feed. Tapping function with direction switch. Equipment: RÖHM drill chuck 3 - 16 mm, operation via left/right foot switch. Very well-maintained, excellent used condition!

Kondisi: baru, Tahun pembuatan: 2025, de Bedpfxshv U U De Ahwscw

Kondisi: baru, DM1100 2C – Edge Rounding Machine for Laser, Plasma, and Punched Parts. NEW DESIGN – UNDER POWER FOR INSPECTION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds both the upper and lower edges of metal parts, starting from a minimum size of 150 mm up to a length of 1100 mm, all IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above also using two counter-rotating cross belts. Thanks to these cross belts, both internal and external edges of the parts are rounded. Sharp edges on steel, stainless steel, and aluminum parts—produced by laser, punch presses, or shearing processes—are removed effectively. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another key advantage of the DM1100 2C is its capability to process small parts from 50 mm onwards. By folding up a table, the rotation direction of the upper conveyor belt is automatically reversed, and the gap of the first processing station is bridged, so that parts go directly into the second station. This means small parts sized from 50 mm up to 150 mm can then be processed on one side only. Bsdped Ev Upsfx Ahwecw An additional positive feature of this machine is its ability to round parts with protective surface film without damaging the film. Simple, tool-free cross belt change. Programmed automatic positioning of the upper and lower belts for optimal accessibility and reduced changeover times. Effortless operation via integrated touchscreen. This machine is, of course, also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100x50 Number of cross belt stations: 2 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560x1980x2150 Weight (kg): 2210

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jarak pergerakan sumbu X: 2.050 mm, jarak lintasan sumbu Y: 850 mm, jarak gerak sumbu Z: 750 mm, jumlah slot dalam magazin alat: 36, panjang meja: 2.200 mm, lebar meja: 850 mm, model controller: OKUMA-OSP-HMI, pasokan pendingin: 15 batang, jarak dari tengah meja ke hidung spindel: 950 mm, daya motor spindle: 22 W, jumlah spindel: 36, pergerakan cepat sumbu Z: 16 m/menit, gerak cepat sumbu X: 16 m/menit, pergeseran cepat sumbu Y: 16 m/menit, hidung spindel: BT 50, kecepatan spindel (maks.): 10.000 rpm, kecepatan spindel (min.): 50 rpm, beban meja: 2.500 kg, diameter alat: 120 mm, panjang alat: 400 mm, berat alat: 20 g, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, 3-axis vertical machining centre with OKUMA-OSP-HMI CNC Bsdju Dinkopfx Ahwscw

Kondisi: bekas, Tahun pembuatan: 2016, Linea di imbottigliamento Alfatek | Birra Anno: 2016 Velocità: 1.000 bph Direzione: Americana Etichettatrice Enos N.2 stazioni adesive Bedpfx Aowdiq Tshwscw Monoblocco di riempimento Alfatek 7.1 Elvira Riempitrice a 7 valvole Tappatore a testa singola per tappi a corona da 26mm e 29mm Protezioni di sicurezza

Kondisi: baru, Tahun pembuatan: 2023, Pipe drilling machine, angled drilling machine, drilling automaton TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - manual material clamping - manual feed - max. pipe length 3,000mm (optionally 6,000mm) - positioning accuracy +/- 0.2mm - 10 stops (can be expanded as required) - manual loading and removal of material - drilling head swivel range +/- 50° - manual 360 degree pipe rotation device - drilling unit power 1 x 2.2 kW - motor speed 295 - 2950 rpm Bcsdpfx Ajlgvkijhwow - speed display on touch panel - drilling unit lighting - integrated tool cabinet - round tube up to 114mm - square tube up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - double-post up to 100 x 15mm - flow drilling up to M12 - drilling diameter up to Ø 50mm

Kondisi: baru, DM100 Z2C – carries out edge rounding and removes sharp burrs from both internal and external edges of steel, stainless steel or aluminum parts after laser, shear or punch cutting, for metal parts ranging from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore hardness) using an abrasive belt, efficiently removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—one from below and one from above. The cross belts round off both internal and external edges of the workpieces. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Specifications – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Bcjdpfx Asd Ixadehwjw Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150+185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Kondisi: bekas, High lift hand pallet truck, pedestrian stacker, manual tiller stacker LOGITRANS tipe LF 1001 / 1600 Pengangkat alat, troli pergantian alat Nomor seri: 051E04006100 Tahun pembuatan: 2005 Kapasitas angkat: 1000 kg Tinggi angkat: 1600 mm Panjang garpu: 600 mm Ukuran platform: 800 x 650 mm Panjang total: 1200 mm Lebar total: 800 mm Tinggi keseluruhan: 1930 mm - Pengangkatan dengan hidrolik mekanis, pengoperasian pengangkatan menggunakan tuas kemudi - 2 kecepatan pengangkatan sekitar 36 gerakan handel manual untuk ketinggian angkat 1600 mm atau sekitar 10 gerakan untuk 10 cm angkat - Dapat digerakkan dengan mendorong secara manual - Garpu pendek dengan pelat penahan yang terpasang untuk penampang benda kerja Bcodpfx Aodz Spmshwsw - Panduan garpu yang stabil pada tiang tunggal - Ideal untuk pengisian mesin dengan alat atau benda kerja Berat kosong 198 kg Kondisi sangat baik

Kondisi: baik (bekas), Maschine Typ Hakenstrahlanlage 250 kg TOSCA TS-250 Typ: Hakenstrahlanlage Max. Werkstückdurchmesser: 1000 mm Max. Werkstückhöhe: 1500 mm Max. Werkstückgewicht: 500 kg Maschinenöffnungsbreite: mm Anzahl Turbinen: 2 Bjdpfxsvpgq No Ahwecw Turbinen-Typ: 360 Turbinenraddurchmesser: 360 mm Turbinenleistung: 7,5 kW Max. Turbinenförderleistung: 105 kg/min Fördergleistyp: Y Reinigertyp: Luftabscheider Fundament: nicht erforderlich Gehäuseschutz: Mangan + Gummi Erforderlicher Luftdurchsatz: 3.000 m³/h Max. installierte Anschlussleistung: ca. 19 kW Gesamtgewicht der Maschine: 0 kg Gesamtbreite der Maschine: mm Gesamthöhe der Maschine: mm Gesamtlänge der Maschine: mm Die Maschine befindet sich in einer vollständigen Generalüberholung. Sämtliche beschädigten Komponenten werden durch Neuteile ersetzt, Turbinen werden komplett überholt, neue Lackierung RAL 7037/2000. Die Maschine wird in einem Zustand ausgeliefert, der einem Neugerät entspricht. !!! ZUSTAND WIE NEU !!!

Kondisi: baik (bekas), Tahun pembuatan: 1985, Megamat carousel storage system Model: 130-225-42 Serial number: 4492 Year of manufacture: 1985 Unit height: approx. 5,410 mm Unit width: approx. 2,670 mm Unit depth: approx. 1,300 mm + 300 mm tabletop Number of trays: 42 Tray width: approx. 2,155 mm Tray depth: approx. 410 mm Tray height: approx. 200 mm Shelf load: 100 kg Total load capacity: 4,200 kg Colour: beige/green Bedpfjvc Hk Nsx Ahwjcw