Pusat permesinan vertikal CNC

QUASER MV 184 P/12B

Kondisi: bekas, Tahun pembuatan: 2015, jam operasional: 8.500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 119K151334, jarak pergerakan sumbu X: 1.020 mm, jarak lintasan sumbu Y: 610 mm, jarak gerak sumbu Z: 610 mm, produsen pengendali: Siemens, model controller: Siemens 828D, tinggi total: 2.860 mm, panjang total: 2.800 mm, lebar total: 2.760 mm, lebar meja: 700 mm, panjang meja: 1.200 mm, kecepatan rotasi (maks.): 12.000 rpm, jumlah slot dalam magazin alat: 30, Tipe pemegang alat turret alat nomor 3: SK 40, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Pusat pemesinan Quaser 184 /12B. Tahun pembuatan 2015. X1020 mm Y610 mm Z610 mm. 12.000 rpm, unit kontrol: Siemens 828D. Persiapan sumbu keempat dan robot. Kondisi sangat baik. Iedpjzdcyyefx Am Rjau

Kondisi: bekas, Tahun pembuatan: 1992, Technical details: X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 500 mm Spindle taper: ISO SK 40 Control system: Philips 532 Vertical quill stroke: 80 mm Spindle speed range: 0–600 and 600–4000 rpm, stepless Feed rate: 1–3000 mm/min Rapid traverse: 6 m/min Clamping surface of table: 1100 x 600 mm Table feed: 1–3000 mm/min, stepless Operating hours: 82,194 h Total power requirement: 9.6 kW (12 kVA) Weight approx.: 4,200 kg Machine dimensions (LxWxH) approx.: 2.9 x 2.2 x 2.5 m Additional technical specifications: - Vertical table adjustment (Z-axis): 500 mm - Spindle head overhang min./max.: 200 / 750 mm Equipment: - Coolant tank with pump - Handheld control unit Iaodeu Nda Eepfx Am Rou - Heidenhain linear measuring system

Tahun pembuatan: 2000, Kondisi: bekas, en-WENZEL LH 108 CNC – Controlled Vertical 3D Measuring Machine x-axis travel: 1000 mm y-axis travel: 1600 mm z-axis travel: 800 mm Control: WENZEL WPC 2040/FW31.351 Total power requirement: kW (not specified) Machine weight: approx. 5,500 kg Space requirement: (dimensions not specified) Model: LH 108 CNC Year of manufacture: 2000, continuously serviced and calibrated by the manufacturer _____ Y-axis as a longitudinally movable measuring gantry: 1,600 mm X-axis as crosswise measuring head carriage: 1,000 mm Z-axis as vertical measuring quill: approx. 800 mm Max. workpiece/table load: approx. 2,250 kg Clearance under measuring gantry: approx. 900/1000 mm Table size (overall): approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table top thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special features / Accessories: • Measuring table, traverse, and quill made of dark natural hard stone; table features 6 x 9 threaded holes for securing workpieces/fixtures • All axes are air-bearing, providing smooth, virtually wear-free operation, fitted with incremental linear scales with 0.0005 mm resolution • WENZEL CNC control type WPC 2040 / FW 31.351 installed in the work table (control unit replaced approx. 3 years ago) • WENZEL measuring software type METROSOFT QUARTIS R 12 SP1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments) with measuring probe model PH 10 M plus and probe TP 20 with various accessories • RENISHAW Probe Head Controller unit type PHC 10 C-3 plus, also integrated in the work table • Automatic probe changer possible, 6-position probe magazine model MCR 20 mounted on the table • Mobile hand control panel with progressive joystick for manual control of all three axes with continuously adjustable travel speeds • Calibration sphere for mounting on table, work table, various clamping devices, etc. Isdpfx Aot Hw Nyem Rjau Condition: Very good – generally available for inspection under power in stock, demonstration-ready; disassembled by a CMM specialist at previous owner's site and reassembled here. Delivery: Ex-stock – as seen and inspected Payment: Net – payment upon receipt of invoice.

Kondisi: baru, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Max. load: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Travel ranges: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides on X/Y axis Roller guides on Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM-Type) / changer: Magazine capacity: 30 tools System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300-liter tank and pumps External coolant around spindle Chip spirals right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling control panel Electronic handwheel (wired) Central lubrication oil/air Fully enclosed Ijdpfxsifn N Nj Am Reau Work light Heat exchanger on control cabinet Auto power off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation space: W3,160 x D3,000 x H3,000 mm (including chip conveyor discharge to the left) Machine weight: approx. 5,400 kg (net) Included special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 slots, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. wiring and Harting connector without axis driver Coolant, chip, and compressed air management: - Bed wash - Through-spindle coolant pump with 20 bar pressure, for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip bin (chip discharge front to left machine side) Measuring and monitoring systems: - RENISHAW OMP-60 touch probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage control in the machine, incl. holder - Auto-door (side door) - Pneumatic interface for workpiece clamping - Included clamping devices as shown with RoboJob Mill Assist 25kg (Year 2025 - NEW) - Full enclosure - Double gripper Immediately available

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 5.792 h, jarak pergerakan sumbu X: 1.016 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 635 mm, produsen pengendali: HAAS, beban meja: 794 kg, kecepatan spindel (maks.): 12.000 rpm, jumlah sumbu: 3, en Isdpfx Ajx D I Smem Rjau

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 1.270 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 635 mm, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 22.400 W, jumlah sumbu: 3, This 3-axis vertical machining center HAAS VF-4SS was manufactured in 2008. It features a travel range of 1270 × 508 × 635 mm, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer with 40 + 1 positions and a high-speed machining package. If you are looking for a high-quality milling machine, you should consider the HAAS VF-4SS we are offering for sale. Contact us for further information. • Spindle-to-table distance: 102 mm Iasdex D Irmjpfx Am Rsu • Tool holder taper: CT40 (DIN 69871) • Max. cutting feedrate: 20.5 m/min • Rapid traverse (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/Features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Additional equipment • Auger-type chip conveyor • Additional high-pressure filtration system

Kondisi: bekas, Tahun pembuatan: 2013, A 4-axis CNC machining center from Spinner is available. Travel range X/Y/Z: 1600mm/810mm/700mm, rapid traverse X/Y: 18m/min, rapid traverse Z: 15m/min, table dimensions X/Y: 1800mm/810mm, max. table load: 2000kg, spindle speed: 10,000 rpm, power: 22kW, tool holder: SK40, tool stations: 24, weight: approx. 8,000kg. Documentation available. An on-site inspection is possible. Iodpfx Amowqd R Uo Rsau

Kondisi: bekas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 50 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW SUB SPINDLE Iodpfx Amouha Ume Reau - Max. bar diameter: 20 mm - Travel path Z: 150 mm - Travel path X: 225 mm - Spindle speed: 8,000 rpm - Spindle drive power: 1.1 kW - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 5 - Travel path X/Y: 97/133 mm SUBSEQUENT MACHINING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 6 kW DIMENSIONS AND WEIGHT - Required space: 1063/2033 mm - Machine height: 1666 mm - Machine weight: 1,700 kg ACCESSORIES - Control system: CINCOM 18iTB - Coolant tank - Bar feeder: IEMCA SMART 320

Tahun pembuatan: 2025, Kondisi: baru, de Iedegd Uifepfx Am Reau

Kondisi: baru, en-001 Iaodofbbx Rspfx Am Rsu