Pusat pemesinan vertikal

Quaser MV 204 CPL

Kondisi: bekas, Tahun pembuatan: 2006, Technical details: X-axis travel: 1,500 mm y-axis travel: 700 mm z-axis travel: 610 mm Control: HEIDENHAIN iTNC 530 Table size: 1,400 x 700 mm Tool holder: SK 40 Number of tool changer positions: 48 stations Dkjdpfx Aasndz Aqeqjl Continuously variable spindle speeds: 15,000 rpm Rapid traverse: 36 m/min Table load capacity: 700 kg Spindle motor: 25 kW Total connected load: 30 kVA Machine weight approx.: 9.1 t Space requirement approx.: 3.7 x 2.65 x 2.9 m Vertical machining centre, ICS 20 bar, 3D probe, Chip conveyor, Electronic handwheel Counter readings: Approx. total operating hours: 43,600 h, approx. spindle hours: 20,000 h,

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SL154SY, panjang pembubutan: 750 mm, diameter putar di atas sled silang: 510 mm, diameter pembubutan: 680 mm, daya motor spindle: 7.500 W, kecepatan spindel (min.): 50 rpm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 56 mm, jarak pergerakan sumbu X: 215 mm, jarak lintasan sumbu Y: 70 mm, jarak gerak sumbu Z: 550 mm, diameter pemasangan: 20 mm, gerak cepat sumbu X: 18.000 m/menit, pergeseran cepat sumbu Y: 6.000 m/menit, pergerakan cepat sumbu Z: 24.000 m/menit, kecepatan rotasi (maks.): 3.000 rpm, kecepatan rotasi (min.): 20 rpm, jenis arus masuk: tiga fasa, panjang pemakanan sumbu X: 215 mm, panjang umpan sumbu Y: 70 mm, panjang umpan sumbu Z: 550 mm, torsi: 70 Nm, saluran batang: 56 mm, tinggi total: 2.015 mm, panjang total: 3.336 mm, lebar total: 1.873 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, MESIN BUBUT MORI SEIKI SL154SY DENGAN LNS BAR FEEDER LASER RENISHAW TERUJI KOTAK PERKAKAS. MESIN TELAH DICEK DAN SIAP DIGUNAKAN DALAM KONDISI OPTIMAL. Dkodsxddfvopfx Aaqel

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Kontroller: Fanuc 18 iMB Sumbu (X): 1524 mm Sumbu (Y): 700 mm Djdpjx Tqgnjfx Aaqskl Sumbu (Z): 610 mm 4-sumbu Meja Kitagawa dengan pinol Kone spindle: 40 BBT Motor spindle: 30 kW AC Kecepatan spindle: 12.000 rpm Pendingin melalui spindle: 20 bar Perkakas: 48 Ukuran meja: 1700 x 700 mm Berat Mesin: 9.800 kg Dimensi Mesin: 2950 x 4480 x 3030 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jam operasional: 9.192 h, jarak pergerakan sumbu X: 1.200 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, kecepatan spindel (maks.): 16.000 rpm, jumlah sumbu: 3, This 3-axis vertical machining center HERMLE C 1200 was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, a Y-axis travel of 900 mm, and a Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and offers 30 tool positions. If you are looking for high-quality machining capabilities, you should consider the HERMLE C 1200 machine we offer for sale. Contact us for further details. • X axis – 1200 mm • Y axis – 900 mm • Z axis – 500 mm • Machining center C 1200 V • Heidenhain iTNC 530 CNC control • Spindle: 16,000 rpm • SK 40 tool taper • 30 tool stations • Fixed clamping table • Coolant system • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine bed • Gantry design with closed rear wall for significantly improved support under torsional loads • Two axes are located in the tool, ensuring excellent mass distribution and ideal conditions for high rapid traverses and feed rates • Lead screw diameter and pitch (X and Z axes): 40 / 20 mm • Lead screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) on X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature to maintain accuracy: 20 °C ± 1 °C • Flushing/washing system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg Dsdpfsylw Stex Aaqskl • Tool change time (chip-to-chip) according to VDI 2852: 6.5 seconds • Handheld control unit with electronic handwheel, axis direction buttons, feed control, rapid traverse, emergency stop, and enable switch • Machine hours – 11,927 h • Spindle hours – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic hand control module (iTNC) Technical Specification Taper Size: SK 40

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Grinding area: 2000 x 900 mm, cross travel: 875 mm, longitudinal travel: 2450 mm, distance from table to spindle centre: 845 mm, magnetic chuck dimensions: 2000 x 800 mm, max. table load: 2.3 t, longitudinal feed: 1,000–30,000 mm/min, cross feed: 0.01–2,000 mm/min, vertical feed: 0.001–1,500 mm/min, grinding wheel dimensions: 500 x 100 x 203.2 mm, grinding spindle motor power: 22 kW, length: 6,800 mm, width: 3,450 mm, weight: 13 t. Inspection on site is possible. Dedpouyk N Iofx Aaqokl

Kondisi: sangat baik (bekas), Star SA-12 Sliding Headstock Automatic Lathe Technical Data Rapid Traverse (X, Y, Z, ZB): 370 mm Maximum Feed (X, Y, Z, ZB): 270 mm Smallest Input Increment (X, Y, Z, ZB): 120 mm Machining Capacity Maximum Turning Diameter: 13 mm Maximum Headstock Stroke: 140 mm Maximum Drilling Capacity: 7 mm Maximum Tapping Capacity: 7 mm Maximum Thread Cutting Capacity: M6 x P1.0 Main Spindle Spindle Speed: 500 – 12,000 rpm Drive: Spindle drive Main Spindle Motor: 2.2 / 3.7 kW Main Spindle Indexing Angle: 1° or 15° Main Spindle Bore: 20 mm Tool Slide Type: Linear slide Number of Tools: 6 tools Number of Driven Tools: 3 tools (Collet: ER 11) Driven Tools Spindle Speed: 1,970 / 2,330 rpm Max. Drilling Capacity: 4 mm Max. Milling Capacity: 4 mm Sub Spindle Max. Clamping Diameter: 13 mm Max. Part Length for Front Ejection: 85 mm Max. Release Length: 30 mm Spindle Speed: 500 – 8,000 rpm Sub Spindle Motor: 0.5 kW Tool Selection: 4 tools Max. Drilling Capacity: 4 mm Max. Tapping Capacity: M3 x P0.5 Power Supply Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power: Average: 6.0 KVA SCOPE OF DELIVERY Includes (not exhaustive): Dkjdpfxowi Ty Ae Aaqel STAR SA-12 Sliding Headstock Automatic Lathe Control: Fanuc Series 18i-T Fire Suppression System Coolant Tank Transformer LNS Bar Feeder Please refer to the photo gallery for the exact scope of delivery. No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Kondisi: bekas, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 45 kW - Spindle speed: 12,000 rpm LINEAR AXES - Travel X/Y/Z axes: 1700/1400/1240 mm - Rapid traverse speed (X/Y/Z): 48 m/min - Feed speed (X/Y/Z): 20 m/min SWIVEL AXIS B - Travel: 360° - Minimum resolution: 0.001° TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 60 - Tool change time: 6 sec PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1250 x 1250 mm - Number of pallets: 2 - Max. pallet loading: 3,000 kg - Distance from table center to spindle nose: 70–1470 mm - Max. workpiece diameter: 1970 mm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Machine weight: 32,500 kg MACHINE HOURS - Power-on hours: 34,422 h Dkjdpfx Aaew D Hwweqjl EQUIPMENT - CNC control: Fanuc 31i-model B5 - Interface: Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 70 bar * Internal coolant supply (IKZ) * with paper filter * with coolant chiller * with cabin wash - Chip conveyor - Tool measurement probe system - Workpiece measurement probe system: Renishaw RMP60 - Electrical transformer

Kondisi: baik (bekas), Tahun pembuatan: 1998, Teile, die von Hand gezeigt werden, sind nicht im Lieferumfang enthalten. Technische Daten sind auf dem Bild dargestellt. Dedpewb Aqnefx Aaqskl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control: SIEMENS 840 D w-axis 1500 mm Column clearance: 2500 mm Clamping surface: 3000 x 2000 mm Workpiece weight capacity: 10,000 kg Spindle speeds: 5-6,000 rpm Gear stages: 2 Drive power - milling spindle: 45 kW Distance spindle to clamping spindle: 3500 mm Spindle torque: 1,250 Nm Tool changer capacity: 200 positions Tool diameter: 135 / 250 mm Max. tool weight: 50 kg Max. tool length: 400 mm Tool holder: ISO SK-50 The portal milling machine is in very good condition. ADDITIONAL EQUIPMENT FOR DRILLING/MILLING Dkedpfx Aovwgmmeaqsl Angle milling head yes Automatic tool clamping yes Ball screw drives yes Guideway covers yes Coolant system yes High pressure cooling system (internal coolant supply) yes Fully enclosed work area yes Portal machining center with tool changing system and second table plate.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, ANAK – MATIC 7 CNC – 3-Axis Machining Centre | HEIDENHAIN TNC 426 | 1000 x 500 x 505 mm Dedpfxokuz I No Aaqjkl Compact and efficient CNC machining centre, ideal for precision 3-axis milling operations. Equipped with HEIDENHAIN control and high-speed spindle. 🛠 Technical specifications: • X-axis travel: 1000 mm • Y-axis travel: 500 mm • Z-axis travel: 505 mm • Main spindle: 7.5 kW – 6000 rpm • CNC control: HEIDENHAIN TNC 426 • Number of axes: 3 • Table dimensions: 1150 x 475 mm • Machine weight: 5000 kg ✅ Ideal applications: • Production of small and medium-sized parts • Contract machining workshops • Moulds, tooling, general machining 📌 Available for immediate delivery. Reliability and precision with HEIDENHAIN control, in a robust and versatile machine.