Surfinisher / Gleitschleifanlage

Rösler RMSF-4/800 / R 12/6 SM-E / Z1000

This system is a complete Surfinisher plant including extraction station, undersize screening station, complete water treatment system, and water tank from Rösler.

The deburring performance with an immersion time of 20 seconds is approximately equivalent to 10-15 minutes in a conventional vibratory finishing machine.

Rotating Working Container RMSF 4/800
1 pc. round plastic container
- Working container diameter: 850 mm
- Working container depth: 500 mm
1 pc. quick coupling for easy working container change
1 pc. drive motor, power 7.5 kW
1 pc. dosing unit D1-K/320 SF (recirculation water) on stand
1 pc. stand for inlets into the working container
1 pc. flow monitoring (via flow sensor)

Undersize Screening:
1 pc. media return system
1 pc. base frame as stable welded construction
1 pc. balancer for weight compensation (media + hose + nozzle) including support frame
- Suspension for hose on base frame
1 pc. vacuum generator for creating negative pressure
- Connection of the pipe system to the transfer unit of the mass finishing system
- Suction hose with nozzle, length approx. 5 m
1 pc. collection container 500 liters as cyclone separator
- for collecting process media extracted from the working container
- for discharging the process media to the screening machine
- incl. automatically operated shut-off slide and hose for returning process media to the screening machine
1 pc. spray nozzles for rinsing the collection container
1 pc. two-hand control for flap
1 pc. dosing unit DZ1-K

Rösler Screening Machine R 12/6 SM-E
- for undersize screening
- Total length: 1,400 mm
- Total width: 1,160 mm
- Screen area: 1,200 x 600 mm
- Discharge height: 1,065 mm
- Step in separation zone: 1 x 40 mm
- Vibrator motor power: 2 x 0.525 kW
- Vibrator motors mounted laterally
- Motor speed: 1500 rpm
- Operating voltage: 400 V, 50 Hz, 3 PH N/PE

Rösler Centrifuge Z 1000 ASS-II-Turbo with automatic sludge discharge
consisting of:
Centrifuge Z 1000
* Centrifuge rotor made of aluminum alloy
* Speed: 2,050 rpm
* reduced peel speed via frequency converter
* automatically retractable peeling knife
* Sludge quantity per peeling cycle: up to 25 kg
* automatic residual water drainage
* long bearing life due to relubricatable special bearings
* electronic vibration monitoring
* automatic rotor rinsing

Equipment:
1 pc. sludge wagon RSKM 30
1 pc. combined waste water and circulation tank 700/700 liters
1 pc. flocculant dosing pump DP2
1 pc. automatic re-dosing DZ-4/320
2 pcs. suction lances (empty-level monitoring)
1 pc. noise reduction package approx. 80 dB(A)
Lajdpfx Aoyngitjl Njd
1 pc. cooling unit RK 3
1 pc. titration set for manual compound measurement

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.