Meja bundar

Rückle PKTF 1200

Kondisi: bekas, Tahun pembuatan: 1952, de-hu-001 Kdedpfx Aloyt Rxvs Ast

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, tekanan: 16 batang, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, suhu: 400 °C, tegangan masuk: 6.000 V, kecepatan rotasi (min.): 1.500 rpm, kecepatan rotasi (maks.): 1.500 rpm, jenis pendinginan: udara, Industrial steam turbogenerator Howden – model KK&K TWIN CA46, NEW, never installed and never commissioned, still under manufacturer’s warranty. Following a revision of long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, complete according to original OEM supply. The machine is NEW, entirely manufactured and tested at OEM level, but never installed or put into service. It is still covered by the manufacturer’s warranty and is stored in an indoor, climate-controlled environment. Immediate availability eliminates standard production lead times, which for this type of equipment are generally 24–36 months. Main supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 Kdjdpfeyidvdox Al Aot - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP section (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical power at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless execution, suitable for parallel operation with the grid Included systems: - Integrated oil system within the base frame - Main mechanical oil pump and auxiliary electric pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - Turbogenerator simulation model ENC-RfG Typical applications: - Industrial cogeneration (CHP) plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and service steam Condition and status: - Condition: NEW - Year of manufacture: end of 2024 - Never installed – never commissioned - Still covered by manufacturer’s warranty - Complete OEM technical documentation available - Option of installation and commissioning with manufacturer’s support Possible application fields: - Biomass and waste-to-energy plants for the production of electricity and service steam, with immediate unit availability and without multi-year manufacturing lead times - Industrial cogeneration (CHP) in plants with continuous process steam demand (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants as a rapid alternative to new OEM supply with 24–36 month lead times Price: on request. Further technical information and documentation available upon request.

Kondisi: baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 2.200 kg, KUKA KRC4 Linear Axis 1500/3T Ksdpfxovzxg Tj Al Aodt Item number: 8143983 Serial number: 143983 The KUKA KRC4 linear axis is a high-precision and robust motion unit, ideally suited for industrial applications. It ensures precise control of movement sequences and plays a central role in automation processes as well as robotic systems within manufacturing. Its sturdy construction guarantees consistently reliable performance, even in the most demanding environments.

Kondisi: baik (bekas), Data teknis: Motor penggerak / Motor Jumlah: 4 unit tersedia Produsen: SEW Eurodrive Kondisi: Baik (bekas) Daya: 50Hz/ r/min 1461/228 Kdodpfxef N Hdxo Al Ast KW 1,5 S1 Solusi yang disesuaikan untuk intralogistik Anda Untuk conveyor rol, conveyor sabuk, conveyor miring, atau teleskop untuk proses bongkar-muat barang Anda, kami adalah mitra profesional yang dapat Anda andalkan! Kami dengan senang hati akan menyiapkan penawaran khusus sesuai kebutuhan Anda, atau memberikan konsultasi terkait perancangan dan pertanyaan instalasi. Cukup informasikan kebutuhan dan kondisi lapangan Anda kepada kami. Manfaatkan pengalaman kami yang telah lama di industri ini serta jaringan ahli yang luas. Kami telah berhasil merealisasikan berbagai proyek untuk perusahaan dari beragam sektor—seperti logistik, industri farmasi, kerajinan, dan elektronik. Bersama Anda, kami akan mengembangkan solusi untuk mengoptimalkan alur proses dan arus material Anda secara hemat biaya dan berkelanjutan. Bahkan teknologi sortir otomatis sepenuhnya atau komponen tambahan seperti rak pengambilan barang (pick rack) maupun wadah juga dapat kami tawarkan.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2022, jam operasional: 1.518 h, Fungsionalitas: berfungsi sepenuhnya, daya: 260 kW (353,50 hp), tahun perombakan terakhir: 2026, Paket dasar Inventhor 6: Sistem Pengindraan Beban Tangki bahan bakar 500 liter Sabuk longitudinal: Panjang sabuk 2.900 mm, Lebar sabuk 800 mm Pelumas yang dipasang di tengah Sistem kontrol listrik 24V – pompa listrik tambahan untuk mengoperasikan fungsi-fungsi berikut saat mesin mati: Mengangkat/menurunkan/memiringkan sabuk belakang, membuka/menutup penutup sisir, membuka/menutup sisir, mengangkat/menurunkan corong lipat. Remote kontrol nirkabel lengkap. Kodpfx Asxx N Dgol Aedt Pintu perawatan samping GFK berukuran besar. Ruang mesin yang mudah dirawat. Paket lampu LED: Ruang mesin dan bagian belakang. Kipas yang dapat dibalik secara hidraulik. Pelindung pemuatan tiga sisi. Corong lipat. Alat pemadam api. Tangga perawatan. Kotak perkakas. Peringatan akustik saat mesin dinyalakan. Sistem Telematic Doppstadt. Pengecatan: RAL2011 oranye tua. Peralatan tambahan: Sistem penggerak 260 kW – EV Unit sasis sadel dua sumbu Sistem penghancur Ukuran L – 20 gigi Sambungan hidraulik tambahan 35 – 80 l/menit Penggerak roda hidraulik Sabuk belakang 7 m Magnet di atas sabuk Neodymium Rangka untuk magnet di atas sabuk 7 m Tanggal pengiriman akan disepakati.

Kondisi: bekas, Tahun pembuatan: 2008, WERKSTUECK_BESCHREIBUNG Kdjdpfx Asx Dda Tsl Aet

Kondisi: bekas, Tahun pembuatan: 1982, Rincian teknis: Diameter piringan: 2600 mm Diameter putar di atas support: 2500 mm Panjang putar: - mm Jarak antara pusat: 1600 mm Diameter putar di atas tempat tidur: 2900 mm Lubang spindle: 100 mm Kecepatan putar: langkah gigi U/menit Rentang feeding: pembubutan memanjang 0,12-31,5 mm/menit, pembubutan muka 0,12-45 mm/menit Panjang rel alas: 2900 mm Berat benda kerja maksimal di antara pusat: 400.000 kg Kebutuhan daya total: 45 kW Berat mesin sekitar (semua komponen): ± 29,0 t Dimensi mesin PxLxT: 5,2 x 5,0 x 3,1 m Sistem pengukuran 3 arah dengan tampilan digital RSF-Elektronik Panel pengendali Kdsdpswtctysfx Al Aot Unit pendingin lemari kontrol Rittal

Tahun pembuatan: 2004, Kondisi: baik (bekas), Diproduksi pada tahun 2004 Deskripsi/konfigurasi: Sistem lengkap untuk pengikatan palet otomatis, pembungkusan palet dengan plastik peregang otomatis. Termasuk sistem pemindahan palet yang sepenuhnya otomatis. Sistem dengan konfigurasi ""lurus"", dibangun dengan konveyor rantai dan dikonfigurasi sebagai berikut: > Konveyor rantai lurus, bermotor, pergerakan searah sisi panjang, l~1100 mm, REF 25778.01 > Pengikat palet Cyklop XZE-3111, REF 25778.30 > Konveyor rantai lurus, bermotor, pergerakan searah sisi panjang, l~1100 mm, REF 25778.02 > Konveyor rantai lurus di bawah mesin pembungkus, bermotor, pergerakan searah sisi panjang, l~2600 mm, REF 25778.03 Kdsdehrmlkspfx Al Ajt > Mesin pembungkus palet dengan film model cincin Cyklop GL 2000, REF 25778.40 > Konveyor rantai lurus, bermotor, pergerakan searah sisi panjang, l~1100 mm, REF 25778.04 > Konveyor rantai lurus, bermotor, pergerakan searah sisi panjang, l~1100 mm, REF 25778.04" Tata letak tersedia Kecepatan maksimum dalam palet/jam: 50 palet/jam Konveyor rantai Lebar palet hingga 800 mm Panjang palet hingga 1200 mm Tinggi maksimum palet terisi (tinggi maksimum untuk melewati): ~1700 mm Tinggi sistem pemindahan palet (minimum=300 mm): ~400 mm Berat maksimum palet terisi: ~1500 kg Panjang keseluruhan peralatan: ~8000 mm Lebar keseluruhan peralatan: ~6000 mm Tinggi keseluruhan peralatan: ~3500 mm Daya input: ~15 kW (seluruh sistem) Tegangan: 400 V, 3 Ph, 50 Hz Kebutuhan udara: 6 bar Peralatan berada di gudang pusat Helmstedt dengan bandara terdekat: Hannover (~1,5 jam), Leipzig (~2 jam), Berlin (~2,5 jam) Kondisi: dibersihkan & dalam kondisi berfungsi Ketersediaan mesin: sesuai permintaan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, This CLOOS Instant pro IRPS was manufactured in 2023. It features a QIROX welding robot with a maximum payload capacity of 10 kg and a working range of Ø 3900 mm. Equipped with the advanced QC 2 control system, it comes with a handheld programming unit and supports the new tandem processes for both push and pull welding operations. This unit is ideal for high-quality welding applications and is fitted with comprehensive welding and sensor technology. Please contact us for further information regarding this machine. Machine Advantages Technical advantages: • Working range: Ø 3900 mm • Touchscreen programming pendant • Qirox technology interface • CTMS tool management • TCP measuring device Additional Information Welding Technology - Power source - Arc sensor - Water cooling module - Control module Kdedpfxjyaimle Al Ajt - Wire feed unit - Robot welding torch Software - Parameter loops - Distance-dependent parameter list switching - Multilayer welding technology - Programmable weave patterns - Software language: German IRPS Scanner - IPC control - Rittal control cabinet - Touchscreen - Scanner interface - Uninterruptible power supply - Scan width: 1000 mm at 500 mm product height - Scan speed: 300 to 1000 mm/sec Torch cleaning unit - Torch cleaning device - Pneumatic amplifier - Wire cutter Control Unit - Digital inputs/outputs: 16 - Serial interface - Computer connection: QIROX control - CAN-bus - USB interfaces: 2 - Flash memory: 8 GB - Buffer module: 24V - Point editor - Expandable up to 16 axes

Kondisi: bekas, TECHNICAL SPECIFICATIONS - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE - X travel: 350 mm - Y travel: ±80 mm - B-axis stroke: 270° - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y travel: ±80 mm - B-axis stroke: 270° - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bras charger - Number of magazine tools: 80 - Tool change time: 4.5 sec ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm Kdedpfxjv Ig Ave Al Ast - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h EQUIPMENT - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (IKZ) - Chip conveyor - Spindle cooling - Parts removal