Mesin pemotong benang

RAGNAR HYDR 5-24

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2011, Bekas gergaji pita hidrolik otomatis untuk logam MEP SHARK 332 NC EVO Ukuran pisau: 3320x27x0,9 mm Sudut pemotongan: dari 45° hingga +60° Mode operasi: manual, semi-otomatis dinamis, semi-otomatis, otomatis Kecepatan pemotongan: 15-100 m/menit (inverter) Kapasitas pemotongan: pada 0° - bulat 300 mm - persegi 260 mm - persegi panjang 330x260 mm Dimensi: 2600x2320x2000 mm Tahun pembuatan: 2011 Berat: 1050 kg Hnsdpfjul Svlsx Aazsr Mesin telah sepenuhnya direkondisi dan diuji.

Kondisi: bekas, panjang total: 4.500 mm, lebar total: 1.600 mm, tinggi total: 1.500 mm, 1 Hnedpfxex Ryv Tj Aazer

Kondisi: baru, – Semi-otomatis – Hidraulis – 2 kecepatan Hsdjh Razfjpfx Aazonr – Kemiringan ganda – Tekanan pemotongan dapat diatur secara hidraulis – Pendinginan – Pisau gergaji 2730 x 27 x 0,9 mm – Pengendalian kaki – Tombol darurat – Dokumentasi – 400 V

Kondisi: bekas, Tahun pembuatan: 1982, Rincian teknis: Diameter piringan: 2600 mm Diameter putar di atas support: 2500 mm Panjang putar: - mm Jarak antara pusat: 1600 mm Diameter putar di atas tempat tidur: 2900 mm Lubang spindle: 100 mm Kecepatan putar: langkah gigi U/menit Rentang feeding: pembubutan memanjang 0,12-31,5 mm/menit, pembubutan muka 0,12-45 mm/menit Panjang rel alas: 2900 mm Berat benda kerja maksimal di antara pusat: 400.000 kg Kebutuhan daya total: 45 kW Berat mesin sekitar (semua komponen): ± 29,0 t Dimensi mesin PxLxT: 5,2 x 5,0 x 3,1 m Sistem pengukuran 3 arah dengan tampilan digital RSF-Elektronik Hodpfowtctyjx Aazjnr Panel pengendali Unit pendingin lemari kontrol Rittal

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Machine model: ALC400G Max. workpiece dimensions (W×D×H): 600 × 470 × 240 mm (Flushing) Max. workpiece dimensions (W×D×H): 600 × 470 × 230 mm (Submerged) Max. workpiece weight: 500 kg (Flushing) Max. workpiece weight: 350 kg (Submerged) Working tank dimensions (W×D): 850 × 610 mm X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 250 mm U-axis travel: 150 mm V-axis travel: 150 mm Taper angle (on workpiece, thickness 130 mm): ±25° Wire diameter: Ø0.1 – Ø0.3 mm Maximum wire feed speed: 420 mm/s Wire tension: 3 – 23 N Machining method: Flushing / Immersion Distance from floor to table top: 995 mm Wire spool weight: 8 kg Machine dimensions (W×D×H): 2,115 × 2,500 × 2,230 mm Installation space (W×D): 3,350 × 3,850 mm Machine weight (incl. power supply): 3,400 kg Air pressure: 0.5 MPa Air consumption: 30 NL/min Total power consumption: 3-phase, 50/60 Hz, 13 kVA Hedpfx Ajyu Nqmsazsnr External dimensions of dielectric tank (W×D): 700 × 2,155 mm Weight of dielectric tank (empty): 450 kg Dielectric tank capacity: 675 liters Dielectric fluid filtration method: 3 interchangeable paper filters (internal pressure type) Deioniser: Ion exchange resin (Type 18 L)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, en-001 Hedpfeu Tuk Hox Aazenr

Kondisi: bekas, Tahun pembuatan: 1991, panjang total: 10.730 mm, lebar total: 1.600 mm, tinggi total: 2.400 mm, de-hu-model-001 Hnodpfx Ajy E Imvjazjr

Kondisi: sangat baik (bekas), Dijual mesin ini, sudah terpasang dan dapat diuji coba. Diameter benda kerja maks: 1600 mm Modul: 16 Daya motor utama: 12 kW Dimensi (P x L x T): 4300 x 2000 x 3170 mm Hsdpfxsv Nqppj Aazsnr Berat mesin: 18.500 kg Video mesin dapat dikirim melalui aplikasi WhatsApp.

Kondisi: baru, Band width 150 mm Hnjdpfx Asirwwpsazjr Band length 2000 mm Band speed 30 - 34 m/sec Total power requirement 4 kW Machine weight approx. 100 kg Space requirement approx. 1.2 x 0.5 x 0.85 m

Kondisi: baru, Thread diameter M10 - M33 mm Infinitely variable speed 35/115 rpm Torque 320 Nm Air pressure 6 - 8 bar Working range 400 - 2000 mm The pneumatically driven D-JSC tapping machine is equipped, among other features, with a pneumatic motor featuring a quick-change chuck and a robust, flexible working arm. The tapping arm can be mounted directly onto the worktable using the mounting flange and is immediately ready for operation, allowing for rapid changeover times. It is possible to bring the tap directly to the desired tapping hole without needing to position the component under the tap. The unit design includes an adjustable angle, allowing the quick-change chuck to be tilted so that horizontal tapping is also possible. Pneumatic tapping machines for M3 - M12 threads, with adjustable angle. 6 quick-change chucks with safety clutch included. Options: Hjdpfx Aajfg U Sljzonr - Clamping table with T-slots: 750x600x650mm or 990x700x800mm - Magnetic base.