Perkataan gaib

Rapha-Systems Paternoster 3800

In the field of 3D thermoforming, we also offer presses, turners, brushing machines, and membranes on Machineseeker!

Paternoster
For membrane press

FOIL STORAGE PATERNOSTER

For storing foil rolls in the warehouse and next to the press

Technical data:

Construction height: 3800 mm
Maximum foil width: 1600 mm
Maximum roll diameter: 500 mm
Maximum foil weight: 340 kg
Number of support bars: 12 units
Space requirement: 1000 x 2370 x 3800 mm
Including foil transport cart (trolley)
Drive power: 1.5 kW
Total loading capacity: 4080 kg with maximum roll weight of 340 kg
Device weight incl. loading: 5240 kg
Traffic load (t/m²): 1.89
Maximum core inner diameter: 90 mm, support bar diameter: 42.4 mm
Side paneling over full height
Protective grille from 2.2 m above floor to top of construction
Load chain as hollow pin chain, breaking force 100 kN, pitch 50 mm = support bar suspension grid
Circulating speed: approx. 5.5 m/min
Control via key switch with return (dead man) for up/down
Rated voltage: 400 V; 3N; 50 Hz, mains connection cable with CEKON plug 16A
External fuse protection: 10A slow-blow

Description:
The foil roll paternoster storage system is used for the storage of foil rolls, for example:
Lodebgdv Iepfx Aahota

* Directly at the membrane press, enabling a large number of foil rolls to be stored in the smallest possible footprint. The required film for the pressing process is available at the push of a button.

* As a preliminary storage for all foil rolls. Here, a large number of rolls can be stored in a small space and are always easily accessible.

Optional features:
* Manual or automatic cutting device available
* Ionization
* Other construction heights from 2800 mm up to 6000 mm high paternosters
* Additional hanging rods
* Additional roll transport trolleys

Price on request

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.