Mesin tekuk lembaran logam

RAS 74.30

The machine is in full working condition.

The Multibend 2000 RAS 74.30 folding machine, manufactured by RAS Reinhardt Maschinenbau GmbH, is a universal folding machine with a swivel beam, CNC control, a wide range of segmented tooling, and a working length of 3200 mm, designed for bending steel sheets (400 MPa). A manual or intelligent crowning system is built directly into the bending beam to ensure precise and uniform bends along the entire working length. The elastic deformation of the bending beam depends on the sheet thickness, its strength, properties, bending length, and its position on the support rail. Sensors integrated in the bending beam register its actual deflection during the first 10 degrees of bending, after which the system sends a command to actuators that adjust the camber of the beam accordingly. This compensation eliminates beam deflection. The control system stores all parameters for each new bend and applies them for future operations. The bend line is always perfectly straight with the specified radius, regardless of metal thickness, length, ductility and strength, segment height, or their position in the bending zone of the beam.

Technical specifications:

Working length – 3200 mm
Max. sheet thickness – 4 mm
Minimum bend radius – 1.25 × sheet thickness
Minimum flange height – approx. 6 × sheet thickness
Max. opening width of upper beam – 400 mm
Adjustment range of bending and lower beam – 80 mm
Bending angle – 0–180°
Max. bending speed – 70°/sec
Max. upper beam speed:
UP 44 mm/sec
DOWN 90 mm/sec

Electrical connection – 7.5 kW

Stroke depth – 10–1550 mm
Adjustment speed – 200 mm/sec

Cjdpfx Aeyfm Udog Derb
Pneumatics – 6 bar

CNC control – MULTIBEND 2000

Machine dimensions (L × W × H) – 4.5 × 2.1 × 2.65 m
Machine weight – 5590 kg
Total weight with basic equipment – 5890 kg
Year of manufacture – 1997

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.