Batang bor

RAVENSBURG

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 700 mm, lebar di tengah: 800 mm, kecepatan spindel (maks.): 240 rpm, lebar tempat tidur: 700 mm, berat keseluruhan: 10.000 kg, DETAIL TEKNIS Diameter putar pada tempat tidur: 1.400 mm Diameter putar pada dudukan: 640 mm Tinggi senter: 700 mm Jarak antar senter: 800 mm Lebar alas: 700 mm Lubang spindle: 80 mm Kecepatan putar spindle: 110 - 240 rpm DETAIL MESIN Daya: 11,5 kW Pengendalian: Konvensional Dimensi & Berat Dimensi (P x L x T): 3.500 x 2.500 x 2.500 mm Berat kosong: 10.000 kg PERLENGKAPAN Credpfxsy Hhite Ag Dsb Tampilan digital Penahan pergantian cepat

Tahun pembuatan: 1971, Kondisi: baik (bekas), Uncoiling mandrel – expanding mandrel with support table Crodped Ha E Sjfx Ag Dob Strip width: 1,200 mm Strip thickness: 0.3 – 5 mm Coil weight: 10 t Mandrel diameter: 508 mm

Kondisi: baik (bekas), Tahun pembuatan: 1971, drehdurchmesser-daten-2024-06-28 Codpfxsyq Smpo Ag Djrb

Kondisi: siap digunakan (bekas), Tinggi pusat: 700 mm Codoyn Ed Nspfx Ag Dsrb Jarak pusat: 1800 mm Diameter lingkaran maksimal di atas alas/dalam lengan: 1300/1740 mm Diameter putar di atas eretan penyangga: 740 mm 12 kecepatan spindel: 3 - 135 rpm 12 langkah pakan: 0,15 - 2 mm/putaran Perpindahan eretan atas: 350 mm Sambungan listrik: 380 V, 6,6 kW Berat sekitar: 5,5 t Kebutuhan ruang: 3800 x 1600 x 1700 mm

Kondisi: sangat baik (bekas), Manufacturer: HEYLIGENSTAEDT Model: NDC 710 / 1800 Control: R&D MTC3 4-jaw chuck 1400 mm Steady rest, 3 units, Ø 100–1050 mm Roller steady rest open, 2 units, Ø 1120 mm KNOLL chip conveyor (2022) Boring bar Ø 260 x 3500 mm Boring bar Ø 200 x 1500 mm Boring bar Ø 150 x 1100 mm Turning length: 8250 mm Swing diameter over bed: Ø 1400 mm Cedpfowzh A Asx Ag Djrb Swing diameter over cross slide: 1120 mm Spindle drive power: 100 kW Workpiece weight: 16,000 kg Length: 14,000 mm Width: 3,500 mm Height: 2,900 mm Machine weight: 32,000 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1972, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 90 mm, diameter pembubutan: 1.500 mm, diameter pembubutan di atas alas geser: 2.000 mm, panjang pembubutan: 3.500 mm, kecepatan rotasi (maks.): 250 rpm, RINCIAN TEKNIS Diameter putar: 2.000 mm Panjang putar: 3.500 mm Diameter lingkaran di atas slide tempat tidur: 1.500 mm Diameter plat muka: 1.500 mm Area kerja tinggi senter: 1.050 mm Area kerja jarak antara senter: 3.500 mm (4.350 mm dengan perpanjangan) Lubang spindle: 90 mm Kisaran kecepatan putar: 0,6 - 250 rpm Perpanjangan tempat tidur: 700 mm Dudukan rol penyangga: 150 - 1.400 mm RINCIAN MESIN Kebutuhan daya total: 28 kW Dimensi & Berat Credpfjyrdqpex Ag Deb Kebutuhan ruang: kira-kira 10 x 3 x 3 m Berat mesin: kira-kira 22 t PERLENGKAPAN Senter tetap Lunette (steady rest)

Kondisi: bekas, en-GB-001 Crodpfx Aeu Ix Sgeg Dsb

Kondisi: baik (bekas), The listed driven tools VDI 50 are designed for a tool turret by SAUTER and are in good condition and fully functional. These tools have been used on a GILDEMEISTER CTX 600 CNC lathe. 6 x driven tools, straight type, manufactured by NACKE + WTO, VDI 50 for SAUTER brand tool turret: Item No.: XVI 24275 1 drilling/milling tool, straight type, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet chuck Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €545.00 plus statutory VAT. Item No.: XVI 24277 1 drilling/milling tool, straight type, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet chuck Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €400.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Credpsbql S Hsfx Ag Dob Item No.: XVI 2687 1 drilling/milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item No.: XVI 2687 1 drilling/milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet chuck Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Kondisi: bekas, Tahun pembuatan: 1970, 1 Crsdpfx Agjydqpco Djb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1980, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 2.200 mm, diameter pelat muka: 2.000 mm, jarak pergerakan sumbu X: 1.700 mm, jarak lintasan sumbu Y: 400 mm, model controller: Siemens 840 D, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Mesin telah direkondisi total pada tahun 2015 dan diupgrade ke kontrol CNC Siemens 840 D! DETAIL TEKNIS Diameter meja putar: 2.000 mm Diameter belok di atas meja: 2.200 mm Perjalanan sumbu X: 1.700 mm Perjalanan sumbu Z: 400 (+550) mm Rentang kecepatan meja putar – tanpa tahap: 0,28-160 rpm Tinggi center di atas meja: 1.140 mm Crjdpfx Ajx Db S Teg Dsb Diameter spindle utama: 285 mm Lubang spindle: 100 mm Torsi pada meja putar: 25.000 Nm Berat benda kerja maks.: 5.000 kg DETAIL MESIN Kontrol: Siemens 840 D Kebutuhan daya total: 75 kW Dimensi & Berat Ruang yang dibutuhkan: sekitar 6 x 3,5 x 3 m Berat mesin: sekitar 21 t

Kondisi: sangat baik (bekas), GSP M 743 Slot Mortiser Travel (mm): X450 Y500 Ram stroke (mm): 300 Maximum tool-to-table distance (mm): 450 Throat depth (mm): 590 Groove width: 25–30 mm Table diameter (mm): 700 Feed rate (mm/rev): 0.1–2.5 mm/rev Codpfxeulfuze Ag Dsrb Main motor power (HP): 6 Machine equipped with: Automatic feeds / Ram tilt Dimensions (LxWxH mm): 2300x1700x2600 Machine weight (t): 3.5 Overall dimensions: 2500x2200 height 2400

Kondisi: sangat baik (bekas), 4-Backen-Futter 1.300 mm, Planscheibe im Bett-Ausschnitt 1.500 mm, Planscheibe über Bett 1.050 mm, Spindelbohrung 80 mm, 1,5–266 U/min, Csdpjwzvkzofx Ag Dsrb

Kondisi: baik (bekas), Tahun pembuatan: 1988, Ibkanx9 Cjdpfexmb Adsx Ag Derb

Kondisi: bekas, Tahun pembuatan: 1965, Maximum core drilling diameter: 50 mm Drilling depth: 2,000 mm Swing diameter: mm Maximum drilling diameter: 110 mm Total power requirement: 30 kW Machine weight: approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling diameter: - Solid drilling approx. 2 - 50 mm - Boring approx. 100 mm Maximum drilling depth: 1,600 / optionally up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage: approx. 4,000 mm Credjt Hwucspfx Ag Djb Distance between the two spindle heads: 5,000 mm Centre height above guideway: 350/450 mm Drilling feed of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt drive: 260 - 650 / 650 - 1,625 rpm Work spindle drive: 24 kW Coolant pump drives: 1 x 7.5/15 kW, 1 x 15/28 kW Total drive approx. 60 kW, 380 V - 50 Hz Total machine/guideway length: 7,500 / 5,000 mm Total weight: approx. 10,000 kg Accessories / Special configuration: - The machine consists of the following elements: The main spindle on the left, followed by a BOZA, a table unit powered by a ball screw, BOZA with increased centre height, and at the end, a spindle head of the B 16 series with drive motor approx. 7.5 kW, n = 900/2,400 and 2,400/6,000 rpm; very large and complex coolant system with filter unit, extensive accessories and drilling tools up to 100 mm Ø - Suitable for rotating workpieces/fixed drilling tools (ELB and BTA methods), as well as for stationary workpieces and rotating drilling tools. It can operate with internal oil supply (ELB) or external oil supply (BTA). - Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate: 17/40/120 or 220/500 litres/min, tank capacity approx. 2,500 litres - Feed of the main carriage via ball screw and infinitely variable DC motor. The main carriage currently holds a cross-adjustable table (approx. 500 mm adjustment, table size approx. 800 x 800 mm) for accommodating cubic and cylindrical workpieces. Electrically controlled via a cam track (approx. 2,500 mm) and limit switches for rapid traverse, feed, and return. - 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck, approx. 315 mm Ø - Modernised control panel with speed display, feed adjustment and display, kW display, feed/rapid traverse switching (left/right), etc. - 2 separate switch cabinets, separate BoZa, sleeves, reducers, clamping aids, and much more. Condition: Good – demonstration ready shortly. Due to the accessories, the machine is very valuable. Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further deep hole drilling machines always in stock – please enquire.