Pusat permesinan (universal)

Reiden RX 14

Kondisi: bekas, Swing diameter over bed: 2400 mm Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Supports Gjdpfx Aexddvnodteil Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle housing.

Kondisi: bekas, Tahun pembuatan: 1996, Grinding length: 600 mm Grinding width: 250 mm Workpiece height approx. 385 mm Clamping surface of table: 600 x 200 mm Table speed - stepless: 2 - 35 m/min Maximum table load: 250 kg Grinding wheel dimensions: ø 225 x 25 mm Grinding wheel bore: 50.8 mm Vertical feed, automatic: 0.001 - 0.099 mm Rapid vertical traverse: 600 mm/min Gijdpfx Adst Tqrnotol Table cross feed, continuous: 10 - 1000 mm/min Rapid cross traverse: 1000 mm/min Total power requirement: 6 kVA Machine dimensions L x W x H: 2.65 x 1.70 x 2.28 m Accessories: Digital readout on Y and Z axes, magnetic chuck 600 x 200 mm, grinding wheel with flange, wheel dressing device, wet grinding system with paper band filter.

Tahun pembuatan: 1979, Kondisi: siap digunakan (bekas), Max. Schleifdurchmesser: 300 mm, Max. Schleiflänge: 1.950 mm, Max. Werkstücklänge: 2.000 mm Max. Vorschubgeschwindigkeit: 1–30 m/min Kühlmittelzufuhr: 100 l/min Gjdpfx Aohq Uigedteil Stufenlos regelbarer Drehzahlbereich: 2.000–6.000 U/min Spindeldurchmesser: 88 mm Spitzenhöhe: 150 mm Schleifscheiben: 100–250 mm Spindelleistung: 3,5 kW Gesamtleistung Schleifmaschine: 15 kW – 380 V – 50 Hz

Kondisi: baik (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, MCS Jigger high-temperature 143ºC. Type: COMBY-JIGGER JP70. Year of manufacture: 1982. Completely refurbished in 2002. Giodpfxsfqmx Ts Adtsl Pressure: 3 kg/cm² Capacity: 9,170 l Roll width: 2,000 mm Fabric diameter: 1,100 mm Roller diameter: 324 mm Additives tank.

Kondisi: bekas, nomor mesin/kendaraan: 51568, Pressure: 100 t Stroke: 0-500 mm Table area: 800 x 650 mm Ram area: 800 x 600 mm Through-hole in table: 355 mm Table height above floor: 800 mm Installation height: 1130 mm Approx. machine weight: 5.7 t Gedpfocxxrrox Adteil Throat depth: 310 mm Space requirement approx. LxWxH: 1.2 x 2.0 x 3.67 m Installation height specified with stroke in upper position. Machine will be retrofitted to comply with new safety regulations: Safety distance: 270 mm / Overrun measurement 135 mm/s, overrun distance 44 mm.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, de Gjdpfx Adjwl Uvkotjil

Kondisi: baru, Tahun pembuatan: 2025, ATTENTION: POSSIBILITY OF CALCULATING ANY CRANE CONFIGURATION Thank you for your interest in our offer. WNM Sp. z o.o. offers: gantry cranes, semi-gantry cranes, jib cranes, column cranes, suspended bridge cranes, and overhead travelling cranes. We invite you to submit your inquiries. Quotations are tailored based on data provided by the customer, such as: crane type, load capacity, lifting height, dimensions, and runway length. This listing concerns a gantry crane/hoist with a load capacity of 5 TONS. All crane components are manufactured from top-quality materials, ensuring durability and resistance to damage even in demanding environments. TECHNICAL PARAMETERS: GANTRY CRANE HOIST LOAD CAPACITY 5 TONS Span length - 6 M Lifting height: 3.55 M Lifting mechanism - 5-ton electric chain hoist Lifting speed: 2.7 M/MIN Cross-travel speed: 11 M/MIN Crane travel speed: 10 M/MIN DUTY CLASS A3 Power supply: 380V/50Hz/3 PHASE Control mode: pendant "lamp" + remote control A VAT invoice is issued for all machines. For any questions, please do not hesitate to contact us. Gjdpfx Aev Ni Rxjdtjil

Kondisi: baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, MITUTOYO Contracer CV-2100M4 contour measuring instrument Measuring range horizontal X = 100 mm Measuring range vertical Z = 50 mm Column travel Z2 = 350 mm Inclination +/- 45° Dimensions (W x D x H): 745 mm x 450 mm x 885 mm Total weight approx. 150 kg Gisdpfovun Tpox Adtel Includes PC system Includes cross table 218-001 Includes rotary vise 2028-003

Kondisi: bekas, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: HSK63 - Spindle drive power: 17.5 kW - Spindle speed: 18,000 rpm LINEAR AXES - Travel (X/Y/Z axes): 915 / 500 / 500 mm - Rapid traverse speed (X/Y/Z): 30 / 30 / 20 m/min TOOL CHANGER - Number of tools in magazine: 28 TABLE - Table size: Ø 630 mm - Max. table load: 500 kg ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 26 kVA WEIGHT AND DIMENSIONS - Floor space required: 3620 x 3160 mm - Machine height: 3000 mm - Machine weight: 7300 kg MACHINE HOURS - Operating hours: 48,894 h Gsdoup Hw Eepfx Adtoil ACCESSORIES - Control system: Heidenhain iTNC 530 - Coolant tank - Chip conveyor - Oil mist extraction: ELBARON - Coolant unit: HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe system: Renishaw - Tool breakage monitoring: BLUM

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 33.000 h,