Semitrailer walking floor

REISCH RSBS 35/24LK, ca. 90m³ BPW Lift

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), A Gross Apparatebau GmbH shredder, previously used in the timber industry, is available. Feed opening (X/Y): 600mm/800mm, Hopper volume: 0.6m³, Rotor diameter: 252mm, Rotor length: 600mm, Rotor speed: 90rpm, Drive power: 18.5kW, Number of knives: 14, Screen perforation: 10mm-40mm, Extraction port diameter: 160mm, Machine dimensions (X/Y/Z): approx. 1800mm/1200mm/1650mm, Weight: approx. 1300kg, Operating hours: 4578h. Documentation is available. An on-site inspection is possible. Bdedou Nlkxopfx Ad Rja

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Vibrating Screen Type HVSM 1000x3500 general overhaul (workshop-refurbished) with new bearings (spherical roller bearings) and new oscillation elements Bdjdpfx Aowqx Hkjd Rsa Make: HAAS Year of manufacture: 1996 Condition: good (completely overhauled) Trough width: approx. 1000 mm Trough length: approx. 3500 mm Trough height: approx. 150 mm Wall thickness: approx. 5 mm Discharge height: approx. 150 mm Overall height: approx. 300 mm Screening capacity: approx. 10 m³/h (for wood chips and sawdust) Fractions: 2 Screen area: approx. 2.2 m² per mesh size Screen decks: 1 unit (screen zone D = 10 mm, L = 2,200 mm) Drive power: approx. 4.0 kW Weight: approx. 800 kg Machine color: RAL 6011 Reseda green Without electrical installation Suitable among others for screening the following bulk materials: - Wood chips - Sawdust and wood shavings - Biomass - Waste wood - Bark Screening machine | Vibrating screen | Vibro screen | Vibro screening machine | Shaking screen | Wood chip screen | Oscillating screen machine | Flat screen | Vibratory screen | Screening machine for wood chips | Screening machine for CHP plants

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1941, berat kosong: 7.480 kg, berat keseluruhan: 38.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 05/2011, inspeksi berikutnya (TÜV): 10/2024, panjang ruang muatan: 13.600 mm, lebar ruang muat: 2.470 mm, tinggi ruang muatan: 2.770 mm, volume ruang muat: 93 m³, suspensi: udara, ukuran ban: 385/65/22.5, warna: perak, Tahun pembuatan: 2011, Perlengkapan: ABS,

Kondisi: diremaj di bengkel (bekas), Technical data for feed hopper with hydraulic moving floor and bag opener for recyclable materials from yellow bags, commercial waste, and residual waste: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Hopper volume: 30 m³ Drive power: 17.5 kW Dimensions in current condition: 13,200 x 3,050 x 4,350 mm (L x W x H) Condition of the Machine: The feed hopper with bag opener was operated in a large recycling facility, where recyclables from yellow bags or commercial waste were tipped into the hopper using wheel loaders. The bags were opened by the bag opener and the recyclables were conveyed to a sorting plant, or commercial waste was metered for further processing. The system functioned flawlessly until it was dismantled and was replaced with a larger unit with higher throughput. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was performed and parts replaced: - Disassembly of the feed hopper and bag opener into individual components. Cleaning, partial sandblasting, priming, and painting of steel components. - Various wear and protective plates were fabricated and installed new. - The worn ends (approx. 40 cbm) of the moving floor tubes were cut off. New tubes were welded on and the surfaces were smoothed. Bdodpfxsyizxrs Ad Roa - Complete renewal of the sliding plastic plates for the hydraulic moving floor. - Removal of the hydraulic power unit from the moving floor, draining the hydraulic oil tank, replacing the oil filters, and refilling with new hydraulic oil. - Replacement of all three hydraulic manifolds, all valves, the oil sight glass, and all hydraulic hoses from the power unit. - The seal kits and hydraulic hoses on all three hydraulic cylinders of the moving floor were replaced. - All six limit switches (proximity sensors) on the moving floor were replaced. - The conveyor chains on both sides of the scraper conveyor were replaced. - Seven driver strips of the scraper conveyor were replaced. - The drive motor for the bag opener's cutting shafts was replaced. - All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and fittings were renewed. - The entire sliding plastic plates for the hydraulic movement of the bag opener were replaced. The bag opener can be moved in depth, so the system can be used for commercial or residual waste without the bag opener when required. - Both side collision protection plates were replaced. - Various wear parts of the bag opener were replaced. - The entire installation was rewired electrically and reconnected. - The plant control system in the control cabinet was retrofitted by BRT Hartner to autonomous individual control and the standard program was reloaded into the control system. - The unit was commissioned and tested by BRT Hartner; see functional video. Notes: Documentation (operating manual, CE declaration, electrical/hydraulic schematics) is available. Inspection by appointment is possible. We accept no liability for technical specifications or possible errors.

Kondisi: bekas, berat keseluruhan: 36.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 09/2005, inspeksi berikutnya (TÜV): 03/2026, panjang ruang muatan: 13.372 mm, lebar ruang muat: 2.488 mm, tinggi ruang muatan: 2.700 mm, Perlengkapan: ABS,

Kondisi: bekas, konfigurasi gandar: 3 gandar, pendaftaran pertama: 06/2020, panjang total: 14.010 mm, lebar total: 2.550 mm, suspensi: udara, ukuran ban: 385/65 R 22.5, jarak roda: 9.110 mm, Tahun pembuatan: 2010, Perlengkapan: ABS,