Mesin penggiling sisi gigi

REISHAUER OZA 300

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 750 kg, jarak pergerakan sumbu X: 350 mm, jarak lintasan sumbu Y: 220 mm, jarak gerak sumbu Z: 220 mm, berat kosong: 2.450 kg, Charmilles Robofil 240 Year of manufacture: 2001 Iiodswqdrropfx Alcsb Travel paths (X / Y / Z): 350 x 220 x 220 mm Travel paths (U / V): 350 x 220 mm Maximum taper angle: +/- 30° at 220 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1000 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed up to 300 mm²/min Best surface finish: Ra 0.22 µm Available wire diameters: 0.10 mm to 0.33 mm Dimensions of the complete unit: 2020 x 2050 x 2000 mm Total weight of the unit: 2,450 kg The machine will be cleaned, overhauled, and tested by us prior to delivery. We are also happy to offer you installation and commissioning of the machine.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, DE001 Iedpev Ild Sefx Alcoib

Kondisi: bekas, Wheel diameter – max. 180 mm Iodpfx Alotycg Sscsib Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Internal spindle taper MK 4 Table diameter 160 mm Table bore diameter 75 mm Strokes per minute 355 – 630 spm Feed range 0.008 – 0.4 mm/stroke Space requirement approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg With rack cutting attachment Change gear set Year of manufacture: approx. 1981

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1985, de-to-hu-it-lt-lv-nb-nl-pl Iiodpjx Dm Dnjfx Alcjb

Kondisi: bekas, Tahun pembuatan: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal movement of the table: 1300 mm Table speed: 0.02–6 m/min Iiedjynmpgspfx Alceb Workpiece weight between centers: 130 kg Max. workpiece weight (cantilevered): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Newly delivered to university. Taken over in 2018. Then fully serviced by BEMA and delivered to a single-person operator. The machine will now be serviced again and the table geometry reconditioned. 2-axis digital readout (Fagor) retrofitted. – Tailstock with fine adjustment – Internal grinding attachment – Coolant system Accessories available on request.

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 690 mm, lubang spindel: 150 mm, diameter pembubutan: 1.040 mm, diameter pembubutan di atas carriage atas: 690 mm, tinggi pusat: 500 mm, lebar di tengah: 2.000 mm, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 160 mm, jarak gerak sumbu Z: 380 mm, saluran batang: 55 mm, Centre height: 500 mm Distance between centres: 2,000 mm Maximum turning diameter On cross-slide: 690 mm Over bed: 1,040 mm In natural gap: 1,070 mm Bed width (hardened guideways): 670 mm Gap length: 480 mm Gap length in front of platform: 320 mm CARRIAGE Bed guide length: 1,020 mm Cross-slide travel: 640 mm Top-slide travel: 360 mm Ijdpeyhhuwjfx Alcsib SPINDLE Spindle nose: ASA 15’’ Spindle bore diameter: 150 mm Front bearing size NN: 200/310/82 mm Rear bearing size NNU: 190/260/69 mm Internal Morse taper in reduction sleeve: No. 6 Number of spindle speeds: 24 Speed range: 4 – 800 rpm THREAD CUTTING Total threads: 398 Metric threads: 0.5 – 224 mm Module threads: 0.25 – 11 mod. Whitworth threads: 56 – 1/8 TPI DP (Diametral Pitch) threads: 112 – 1/4 DP FEEDS Number: 108 Longitudinal, cross, and top-slide: 0.05 – 22.4 mm/rev RAPID TRAVERSE Longitudinal, cross and top-slide: 2,500 mm/min Longitudinal return: 5,000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm STEADY RESTS Bed steady rest capacity: 140 – 500 mm Carriage steady rest capacity: 40 – 350 mm PERMISSIBLE LOAD Overhang: approx. 1,500 kg Between centres, without steady rest: approx. 5,000 kg Between centres, with steady rest: approx. 6,000 kg Machine weight: approx. 7,800 kg

Kondisi: bekas, Tahun pembuatan: 1974, Maximum wheel diameter - 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-performance gear shaping machine Type LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm* (possibly larger) Max. internal gearing diameter approx. 350 mm Max. gear width 75 mm Module range 0.5-6 Stroke length 82 mm Stroke position adjustability 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MT 5 Stroke rates roughing/finishing 118 - 1,000 rpm Table size 400 mm Table bore 125 mm Mounting height between table and shaping head min./max. 190/290 mm Fixed outreach from shaping spindle 250 mm Axial travel of the table approx. 295 mm Number of teeth approx. 12 - 150 Feed range tooth depth 0.01 - 0.063 mm/stroke -"- Rotary feed at tool diameter 125 0.125 - 3.150 mm/stroke Spindle/Total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special features: Iodpfx Alot Hww Dsceib " Hydrostatic linear guide with separate hydraulic unit, " built-in intermediate plate 100 mm to raise the shaping head, " hydraulic workpiece clamping (RINGSPANN make) integrated in table for flat workpieces and for workpiece internal clamping, various clamping chucks for different workpiece diameters " stepless stroke rate adjustment for roughing and finishing operations (SIMOREG DC-Master), " automatic stroke rate change and automatic feed change for ROUGHING and FINISHING in up to 3 cuts, " automatic and motorized shaping stroke locking in upper position after finishing operation, " separate control cabinet and control panel, " integrated coolant unit with chip conveyor and magnetic separator, " approx. 20 change gears, Condition : satisfactory to good, demonstration-ready shortly Delivery : ex stock – as inspected Payment : strictly net – payment upon receipt of invoice

Kondisi: baik (bekas), Tahun pembuatan: 1998, Max. pitch circle diameter external gearing: 300 mm Max. pitch circle diameter internal gearing: 300 mm Iiodpfovu E Nusx Alcjb Max. outside diameter of workpiece (clamping): 450 mm Module – max.: 6 Gear width – max.: 100 mm Max. helix angle (with tool Ø 125 mm): +/- 45° Stroke rate – stepless: 130 – 1300 strokes/min Workpiece weight: 1000 kg Min. distance table surface – tool spindle: -55 / +300 mm Max. distance table surface – tool spindle: 200 mm Max. table-to-tool spindle distance: 350 mm Manual column lateral adjustment: +/- 25 mm Manual swivel angle of tool spindle: +/- 0.5° Max. tool speed: 15 rpm Max. workpiece speed: 27 rpm Max. tool diameter: 7 inches Voltage: 400 V Frequency: 50 Hz Max. power consumption: 70 A Total power requirement: 48 kW Machine weight: approx. 11 t Space requirements: approx. 4.27 x 3.11 x 2.87 m Table bore: 40 mm Main spindle taper: SK 45 Control: Siemens Sinumerik 840 C Gear shaping machine Gleason PFAUTER Mod. PSA 300 The CNC modular gear cutting machine with skiving cutter for machining external and internal cylindrical gears, with straight or helical involute toothing, as well as any other profile that can be produced by means of generating or indexing shaping. The operating cycle is controlled by a CNC unit equipped with specialized gear cutting software. Field of application --> The PSA 300 was designed for manufacturing: - Spur gears with external teeth - Spur gears with internal teeth - Helical gears with external teeth - Helical gears with internal teeth

Tahun pembuatan: 1993, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine no.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeding for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Pull head mount diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 10.9 m/min Iijdpfx Aljcc D Ddjcob Return speed: hydraulically infinitely variable from 5 to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / Connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a pull bridge for 3 broaching stations. Additionally, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of shaft and end-piece holders is hydraulic. The machine features a coolant system with integrated magnetic chip conveyor, designed for use without a special foundation (pit). Remarks: This machine is designed for use in high-volume production. The machine is in very good condition and still has its original paint. The machine can be inspected under power at our warehouse.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Grinding wheel width max. 15 mm Grinding wheel diameter max. 110 mm Module - max. 0.5 - 10 Pressure angle 15 - 25° Speed 2800 rpm Iodpfevibc Hox Alcsib Total power requirement 0.4 kW Machine weight approx. 0.02 t Space requirement approx. 0.4 x 0.2 x 0.2 m For profiling grinding worms for gear flank grinding machines. Finish and re-profiling on the following models: NZA, AZA, RZ 300 E, RZ 301 S, RZ 362 A, AM,... Adjustable plate (right) with micrometer screw axial adjustment Adjustable plate (left) with micrometer screw radial adjustment 2 precision motor spindles for mounting diamond wheels.