Kompresor sekrup

Renner RSDK-B 3,0 - 10 bar

Kondisi: baru, OPTIMUM OPTIsaw S275N Metal Band Saw - Exhibition machine - Continuously adjustable feed rate, swiveling design ----- Technical Data ----- Swivel range: 0 - 60°, Cutting height: 150 mm, Cutting depth: 230 mm, Blade speed: 45 / 90 m/min, Blade length: 2,480 mm, Ltjdpou R S Hpofx Aahsa Motor 400 V: 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg - New exhibition machine -

Kondisi: baru, Drilling capacity in steel (diameter): 40 mm Throat depth: 275 mm Drilling stroke: 120 mm Spindle taper: MT 4 Speed range: 75 - 3200 rpm Table cross travel: 190 mm Table longitudinal travel: 490 mm Clamping surface of table: 730 x 210 mm Supply voltage: 400 V Feed rates: 0.1 - 0.18 - 0.26 mm/rev Total power requirement: 1.1/1.5 kW Machine weight approx.: 0.35 t Required space approx.: 0.8 x 0.75 x 1.85 m Drill/milling machine equipped with: • Drilling capacity 40 mm • Milling capacity 32 mm • Tapping device • Cross table with adjustable guides Ledpfx Aaoupw T Dshsta • Quill feed • Change-gear transmission

Kondisi: hampir baru (bekas), Perlengkapan: Pelat tipe tersedia, Used stainless steel agitator tank on stainless steel pallet with casters and propeller agitator Type: SBPA1000RWP Item number: 10862 Capacity: 907L Design: Upright construction on stainless steel transport pallet with casters Version: single-walled, min. 2mm wall thickness Product-contact materials: 1.4301 stainless steel Finish: Exterior satin-finished, interior BA (IIId) Internal welds: pickled, passivated and brushed Operating pressure: atmospheric Top: Central traverse with two hinged lid halves Bottom: Dished bottom with outlet groove Tank Dimensions: Tank diameter: 1080mm Total height: 1915mm Overall width: 1200 x 1150mm Drain to floor clearance: 400mm Leg height: 240mm Equipment: 1x Hinged lid, central traverse with two hinged lid halves, stainless steel safety grate under lid for reach-in protection (removable), locking function (lids can be locked open) 1x Reserve nozzle DN50 DIN11851 on tank top 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, PTFE seal 1x Stainless steel transport pallet 4x Swivel casters, 2x with brake 1x Nameplate Lsdpfx Ajv Ha Uisahsta Agitator: Propeller agitator Suitable for viscosities up to 500 mPas Manufacturer: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75 kW Speed: 1410 rpm Operating voltage: 3PH 400V - Solid agitator shaft mounted to agitator drive, non-removable - Shaft balanced for smooth operation throughout speed range - 1 pcs mixing propeller Ø 150mm screwed to shaft end. Mixing propeller made of cast stainless steel, high-gloss polish. - 4x neoprene rubber-metal buffers, motor vibration mounted, hardness grade 70 Shore, neoprene temperature resistant up to 100°C Agitator Control: CEE plug switch on tank, on/off switch, emergency stop, no-voltage release, and phase inverter Infinitely variable speed control of agitator motor via compact external frequency inverter, brand Optidrive. Digital display for frequency or speed. Includes potentiometer and on/off switch. Preconfigured for agitator operation. Operating voltage 3PH 400V Mounted on the tank in a stainless steel bracket.

Kondisi: baru, translation_01_en Ltedpfxeu Imk Ro Aahoa

Kondisi: baru, Welding current: 15 - 40 A Cutting capacity: 1 - 16 mm Open circuit voltage: 96 V Compressed air connection: min. 4 bar Connected load: 3.6 kW Supply voltage: 230 V Weight: 9.0 kg Dimensions (LxWxH): 371 x 153 x 232 mm Digital display. Overvoltage protection. Plasma torch. Earth cable. Pressure regulator with moisture separator. Ltsdpfx Asupxfhsahja Equipped with IGBT technology.

Kondisi: baru, Cutting capacity at 90 degrees (round): 125 mm Cutting capacity at 90 degrees (square): 125 mm Cutting capacity at 90 degrees (rectangular): 127 x 125 mm Saw blade dimensions: 1435 x 12.7 x 0.65 mm Blade speed: 38 - 80 m/min Total power requirement: 0.95 kW Machine weight: approx. 18 kg Ltjdpfx Aajupw R Njhja Dimensions (L x W x H): 720 x 380 x 450 mm Both straight and mitre cuts can be performed at angles between 45 and 90 degrees. With this metal band saw, you work not only precisely but also quickly: the blade speed can be variably adjusted between 38 and 80 metres per minute. With a weight of only 25 kilograms, the saw is suitable for mobile use.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Perlengkapan: pengering pendingin, Kaeser SM 13 Kompresor Sekrup Produsen: Kaeser Tipe: SM 13 Ltsdext Rhpepfx Aahoa Tahun Pembuatan: 2019 Tekanan Operasi Maks.: 11,0 bar Daya Terpasang: 7,5 kW Termasuk pengering udara pendingin TB 26 Tahun Pembuatan: 2019

Kondisi: baru, Drilling capacity in steel (diameter): 30 mm Throat depth: 250 mm Quill stroke: 130 mm Spindle taper: MT 3 Table size: 380 x 380 mm Column diameter: 98 mm Ltsdpfeu Imc Hsx Aahsa Speed range: 75 - 3200 rpm Feeds: mm/rev Total power requirement: 1.1 kW Machine weight approx. 220 kg Dimensions (L x W x H): 0.5 x 0.6 x 2.05 m Gear-driven column drilling machine Thread cutting device Left/right rotation Tilting worktable Lighting 2 electronic speed stages Depth stop Gears run in oil Packing dimensions: 2100 x 400 x 710 mm Weight: 260 kg

Kondisi: bekas, Tahun pembuatan: 2005, Cutting diameter 178 mm Saw band length 2265 mm Cutting width 225 mm Saw band dimensions 2265 x 20 x 0.9 mm Band speed 30 / 60 m/min Cutting capacity at 90 degrees: round 178 mm Cutting capacity at 90 degrees: flat 225 x 110 mm Cutting capacity at 45 degrees: round 140 mm Cutting capacity at 60 degrees: round 85 mm Total connected load 0.75 kW Machine weight approx. 165 kg Space required approx. 1100 x 700 x 1650 mm Equipment: - Coolant system Ltodpferzwwrsx Aahea - Bandsaw blades

Tahun pembuatan: 2021, Kondisi: baru, Selling a workshop crane. The crane is new and unused. Ltsdpfshygn Ijx Aahja Workshop Crane Premium 2051510WKG10 Spread-leg design Maximum load capacity in position A1 = 1,000 kg Lifting height per pump stroke with and without load = 6/20 mm Weight: 130 kg