Gerbong tangki kriogenik, gas, gerbong, CO2

Rheinstahl AG

Kondisi: sangat baik (bekas), Voltage: 220-240VAC // Current: 1.8A // Frequency: 50/60 Hz // Phases: 1 // Power: 0.4 kW WITH CONVEYOR BELT Diverting Belts: For envelope format 10.5cm x 14.8cm and in portrait orientation, the diverting belts should be adjusted toward the central transport belt. Rule: For large envelopes, move the diverting belts outward; for small envelopes, push the diverting belts (22) inward. CONNECTION TO THE PRINTING MACHINE The STENZ-FEEDER requires no synchronization. Guide the feeder by the handles into the printing machine and set the required height using the hand crank. Important: Only after setting the print height, secure the rear rollers and check for stability. Switch on the machine and start printing. For single-sheet feeder printing presses (GTO), adjustable tilt is available. Bwedpfx Aeh Eibajm Tjn Trouble-free envelope printing can begin. Developed for heavy-duty use at maximum print speeds. Compatible with all 36 x 52 printing presses, regardless of feeding system (stream/overlapping or single-sheet feed). – No mechanical modifications to the press are necessary. – No synchronization settings required due to laser technology. – The ultra-short setup time enables cost-effective operation from as few as 1,000 envelopes. – User-friendly handling. – The design of the feeder enforces overlap, so the throughput of the Stenz Feeder is not restricted. – Minimal wear parts for an extremely long service life. – Already certified for use on thousands of different printing presses. – A Swiss quality product – Designed by printers for printers. Specifications: Speed: Limited by the printing machine Length: 115 cm Width: 50 cm Height: adjustable Max. format size: 36.5 x 35 cm Max. feed width: 36.5 cm Electrical: 230 V, 50 Hz

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing Bwedpfoqt Dmyex Am Tsn - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, 1 used CONCRETE BATCHING PLANT In EXCELLENT condition! Manufacturer: EUROMECC Model: EURO 5 MIX Year of manufacture: 2019 Rated capacity: approx. 60–75 m³/h Total production to date: 95,000 m³ Bwodpfx Amjxn A Nbo Ton Aggregate Storage – High Silo / Inline Silo Capacity: 5 bins, each 45 m³ Inline silo feeding via feed belt conveyor Truck loading (hopper volume 25 m³) The plant is COMPLETE with WINTER ENCLOSURE Mixer: 1 unit planetary mixer with agitator 1x EUROMECC MEP 3000/2000 Dosing: Aggregates: Weighing belt (4 load cells, 5,000 kg each) Water: 1 unit water scale (500 kg) Admixture dosing: 1x admixture scale 2x12 l Cement: 1x cement scale (1,000 kg) Cement silos – 6 units 2 x 150 m³ (D=4.6 m) 1 x 90 m³ (D=3.5 m) 1 x 45 m³ (D=3.5 m) Control container / operator booth included Control system: ElettronData Optional with warm air heating in the container Optional with admixture storage in the container Optional with residual concrete recycling system The plant is in very good and fully functional condition! AVAILABLE IMMEDIATELY Location: Denmark Price: on request Offer is net ex works Subject to prior sale, errors and/or incorrect descriptions reserved, without warranty or guarantee, sold as seen, ex site Reproduction, reuse, publication and/or copying of this offer is strictly prohibited in its entirety!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, An aluminium die-casting machine is available. Clamping force: 2,200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking: toggle system, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm/70 mm, shot chamber fill volume min./max.: 293 cm³/898 cm³, casting pressure: 1,990 bar, projected area min./max.: 110 cm²/338 cm², performance: 780 cycles/h. Platen dimensions X/Y: 755 mm/755 mm, tie bar spacing: 500 mm/500 mm, mold height min./max.: 250 mm/600 mm, min. mold dimensions X/Y: 296 mm/296 mm. Includes crucible furnace, air blow-off unit, dosing unit, and 4x control cabinets. Documentation available. Bwsdpfx Aeucfwpom Tjn

Tahun pembuatan: 1999, Kondisi: sangat baik (bekas), TRIULZI-IG tilting glass table Hydraulic With swivel castors The rollers lower to allow 360-degree movement of the glass (for sealing purposes). Bsdpeiy Dtbsfx Am Tjwn 3600 mm length and 2400 mm working height Good working condition Good overall condition As is Immediately available

Kondisi: bekas, jarak tempuh: 170.000 km, daya: 70 kW (95,17 hp), pendaftaran pertama: 09/2012, jenis bahan bakar: diesel, berat keseluruhan: 3.498 kg, warna: kuning, tipe perpindahan gigi: otomatis, kelas emisi: Euro 5, jumlah tempat duduk: 2, volume ruang muat: 17 m³, panjang ruang muatan: 4.400 mm, lebar ruang muat: 2.000 mm, tinggi ruang muatan: 2.000 mm, Tahun pembuatan: 2012, Perlengkapan: ABS, filter jelaga, kunci sentral, program stabilitas elektronik (ESP),

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1980, presskraft-300-to-spezifikation-de Bwodpjd A Hbcofx Am Tsn

Kondisi: sangat baik (bekas), jarak tempuh: 77.813 km, daya: 59 kW (80,22 hp), pendaftaran pertama: 04/2023, jenis bahan bakar: diesel, konfigurasi gandar: 4x2, jarak roda: 2.510 mm, bahan bakar: diesel, warna: abu-abu, kelas emisi: Euro 6, jumlah tempat duduk: 2, panjang total: 3.960 mm, lebar total: 1.720 mm, beban gandar yang diizinkan (gandar 1): 960 kg, beban gandar yang diizinkan (gandar 2): 960 kg, Tahun pembuatan: 2023, Perlengkapan: Bluetooth, pendingin udara, pengaturan jendela elektrik, sistem navigasi, de-to-hu-001 Bwodpfsyl Iv Nsx Am Ton

Kondisi: bekas, Tahun pembuatan: 1983, Grinding length: 8,400 mm Grinding width: 1,450 mm Workpiece height: 1,250 mm Clamping surface: 8,000 x 1,250 mm Table height above floor: 920 mm Distance between columns: 1,470 mm Max. workpiece weight: 59,700 kg Machine weight approx.: 59.7 t Space requirement approx.: 22 x 5 x 5 m Adjustment ranges: - Crossbeam, vertical: 1,250 mm Bwedsvr Hgvjpfx Am Tsn - Grinding support, horizontal: 3,100 mm Adjustment speeds: - Machine table (X-axis): Infinitely variable 1–45 m/min Table crawl speed: 5 m/min - Grinding support, horizontal (Y-axis): Rapid traverse: 3,000 mm/min Feed per step: 0.001–0.099 mm Continuous feed: 100–3,000 mm/min Creep feed: 18+1 mm/min Incremental in-feed: 0.001–0.019 mm - Crossbeam (W-axis): Rapid traverse: 410 mm/min Table drive: - Oil gearbox, type Iv4 - Cylinder Ø: 185 mm - Piston rod Ø: 130 mm - Drive motor: 22 kW

Kondisi: bekas, 24060101 Bedpfx Amoip Rdlj Tswn