Pembuat Air Es / Pendingin

Rivacold RED Compact V7

Machine description and technical data
2.1 Machine Description

The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic piping on site.

Main components:

A: Self-supporting frame with stainless steel cladding (panels 1–6 removable)

B: Basin with evaporator

C: Condenser unit

D: Temperature controller

E: Control cabinet

F: Hydraulic circuit with pump (second pump optional)

2.2 Structure

The compact monoblock housing contains all components necessary for operation. The exterior cladding is made of stainless steel; individual panels are removable for maintenance purposes.

2.3 Basin

The stainless steel basin contains the evaporator block. It is insulated with high-density polyurethane foam. An integrated fan ensures water circulation within the basin.

2.4 Condenser Unit

The condenser unit can operate either with cooling tower water or well water, depending on the order configuration. It supplies the evaporator block and is located beneath the basin.

2.5 Temperature Controller

The controller is a modern microcomputer with a high-resolution display and LED indicators for operational status. The control system is programmed to provide maximum operational safety while remaining user-friendly.

2.6 Control Cabinet

The control cabinet is dust- and splash-proof. It contains:

- Main and emergency switch
- Contactors, thermal relays, fuses
- Safety transformer for control circuits

Access is provided by removing panel 1, located beneath the temperature controller.

2.7 Hydraulic Circuit with Pump

Panel 3 is to be removed for connection. Provided connections:

A – Make-up water (T1): Connection to water supply; level control via float valve.

B – Return (T2): Return from consumers.

C – Overflow (T3): Connection to waste water outlet.

D – Cold water outlet (P1): Supplies consumers; open shut-off valve before commissioning. A second pump (P2) is optional.

E – Condenser water supply:
The shell-and-tube condenser can be operated with either well water or cooling tower water:

Scheme A – Well water: Use the small connectors C1, C2 (inlet and outlet). The large connector remains closed. A pressure-regulated valve control can optionally be installed.
Nwjdpfx Asxvca Asfvjk

Scheme B – Cooling tower water: Use C3 and C1/C2 in parallel to increase flow cross-section.

It is recommended to install a mechanical filter at the water inlet to prevent contamination.

Manufacturer:
FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy
Model: RED COMPACT V.7

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.