Mesin penggerinda sabuk

Rogi WBG150

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Complete plywood panel production line including: - 1 BUERKLE lay-up line, year 1991, with BUERKLE roller gluer (length 3400 mm) + 1 OLM longitudinal conveyor + 1 OLM cross-feed conveyor + 1 assembly table. - 1 press loading rack with 10 positions. - 1 BVH 10-level hot press with oil-heated platens: • Platen size: 3700 x 1900 mm • Platen thickness: 40 mm Iaedoul Uizspfx Aa Nel • Daylight opening between platens: 75 mm • 1 central cylinder, diameter 700 mm, max. hydraulic pressure 315 kg/cm² - 1 press unloading rack with side discharge pushers on an elevating table. Line currently in operation, available second half of 2025.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya: 55,4 kW (75,32 hp), berat keseluruhan: 2.050 kg, jenis bahan bakar: diesel, warna: original, konfigurasi gandar: 1 as, berat operasi: 2.050 kg, berat kosong: 2.050 kg, bahan bakar: diesel, Technical Data: Round timber up to 24 cm Feed width: 300 mm Base weight approx. 2,050 kg Year of manufacture: 2022 4-cylinder Hatz turbo-diesel engine With common rail technology and diesel particulate filter Complies with EURO 5 emissions standard. Mounted on a single-axle chassis for 80 km/h Power Control System Water-cooled 4‑cyl. Hatz turbo-diesel engine 55 kW (74.8 hp) with common-rail technology and DPF Fully galvanized single-axle chassis (80 km/h) Drawbar with overrun brake Front jockey wheel Rear support stand Lighting according to German Road Traffic Licensing Regulations (StVZO), impact-protected Heavy-duty tires 205/65 R17.5 (EX) Hydraulic adjustment of feed speed, thus controlling chip size Chipper knives can be re-sharpened several times (approx. 10x) for long service life PowerGrip feed roller, 300 mm wide, with hydraulic feed Especially grippy, aggressive and consistent feed: each roller has its own hydraulic motor Discharge chute with adjustable deflector, swivelable Discharge chute mounted on ball-bearing slewing ring Relevant machine parts soundproofed Features: Engine and Chassis: Water-cooled, Stage V 4-cylinder Hatz Common Rail turbo-diesel engine with DPF, delivering 55.4 kW (75.3 hp). Automatic industrial overrunning clutch between engine and chipper disc, protecting engine, bearings, and shaft. Fully galvanized, corrosion-resistant single-axle chassis for speeds up to 80 km/h with TÜV approval. Robust, fixed steel mudguards. Provision for front jockey wheel and rear support stand. Height-adjustable drawbar with overrun brake and soft-dock ball coupling or DIN towing eye. Lighting system per StVZO with impact-protected components. Heavy-duty tires 205/65 R17.5. Fuel level indicator for easy monitoring. EU type approval (homologation). Housing/Hopper/Discharge Chute: Rotatable chipper housing with adjustable feed angle up to 270°. Folding feed hopper with minimum feed depth 1,500 mm. Fully galvanized hopper flap for durability. Hopper dimensions (internal): Width = 1,160 mm, Height = 1,040 mm. Swivelable discharge chute with adjustable deflector. Discharge chute on ball-bearing slewing ring for flexible positioning. Sound insulation on relevant machine parts such as chipper hood and discharge chute. Emergency stop button on top of hopper and on the side of the hopper flap. Iaedpfx Aaov Evx Ue Njl Chipping Unit: Safety system in accordance with EN 13525. Chipper disc diameter Ø 800 mm, thickness 40 mm. Closed knife system for quick and safe knife changes. Continuously adjustable chipper knives, can be resharpened multiple times for extended service life. Horizontal counter blade can be used 4 times and vertical shear bar 2 times for long service life. Wrap protection at the main bearing of the chipper disc. Hydraulic Feed: Feed control with independent hydraulic circuit. PowerGrip feed roller (300 mm wide) with hydraulic feed for grippy and consistent material transport. Parallel guide of the upper roller for even feed without misalignment. Hydraulic adjustment of feed speed to control chip size. Hydraulic oil tank level indicator.

Kondisi: baru, Tahun pembuatan: 2025, Cutting speed: 35 m/s Grinding height: 210 mm Workpiece length / mm Machine weight: approx. 210-260 kg Space requirement: approx. 1100 x 760 x 860 mm The G115 surface grinder is a compact grinding machine designed for machining the periphery or face of the grinding wheel on horizontal or vertical surfaces of a workpiece. With appropriate fixtures or shaped grinding wheels, inclined or contoured surfaces can also be machined. This machine is ideally suited for small businesses, maintenance workshops, DIY workshops, laboratories, teaching demonstrations, etc. TECHNICAL DATA Isdpfx Aasvuuvkj Neal Maximum stock removal: not greater than 0.03 mm Maximum grinding wheel linear speed: 35 m/s Table dimensions: 152×304 mm Maximum grinding height: 210 mm Longitudinal table travel: 340 mm Cross table travel: 170 mm T-slot (table): 1-12 mm Grinding wheel outer diameter × bore × thickness: 180×32×13 mm Spindle motor: 550 W/220 V Vertical handwheel feed interval: 0.025 mm Lateral handwheel feed interval: 0.02 mm Net weight / Gross weight: 210/260 kg Machine dimensions: 930×780×730 mm Packing dimensions: 1100×760×860 mm The worktable can be moved forwards and backwards as well as left and right. The grinding head can be raised and lowered vertically. High rigidity of the entire machine. Grinding head runs smoothly. Compact design and low noise operation. A working enclosure is available separately. The machine is lubricated with a manual oil pump. To lubricate, simply pull out the handle. If you require special accessories to increase work efficiency, please contact customer service. (Special accessories must be purchased separately.) PRODUCT INFORMATION: At the proximal end of the main spindle, the radial run-out of the taper bore axis is 0.01~0.02 mm at a distance of 100 mm.

Kondisi: baru, Fastech Horizontal Bandsaw Semi-Automatic BMSY 360 DGH ECO Round cutting capacity mm: 360 Flat cutting capacity mm: 510 x 360 Square cutting capacity mm: 360 +30° round cutting capacity mm: 360 +30° flat cutting capacity mm: 440 x 360 +30° square cutting capacity mm: 360 +45° round cutting capacity mm: 360 +45° flat cutting capacity mm: 390 x 360 +45° square cutting capacity mm: 360 +60° round cutting capacity mm: 200 +60° flat cutting capacity mm: 200 x 360 +60° square cutting capacity mm: 200 -30° round cutting capacity mm: 360 -30° flat cutting capacity mm: 440 x 360 -30° square cutting capacity mm: 360 -45° round cutting capacity mm: 360 -45° flat cutting capacity mm: 390 x 360 -45° square cutting capacity mm: 360 -60° round cutting capacity mm: 260 -60° flat cutting capacity mm: 260 x 360 -60° square cutting capacity mm: 260 Main drive motor power kW: 3 Hydraulic pump motor power kW: 0.37 Coolant pump motor power kW: 0.12 Infinitely variable band speed: m/min 20 - 100 Saw blade dimensions mm: 4800 x 34 x 1.1 Iajdpfog Ekttex Aa Njl Working table height mm: 860 Weight kg: 1450 Length / Depth / Height mm: 2650 / 1210 / 1870 Double mitre saw Infinitely variable band speed Hydraulic vice Heavy-duty gearbox Hydromechanical saw blade tension Saw blade cleaning brush Digital mitre angle display

Tahun pembuatan: 1998, Kondisi: baik (bekas), nomor mesin/kendaraan: PM 1000_01, 1 polishing machine for robotic processing sold. Version: 1 x Left Manufacturer: SHL Ijdpfx Asd S R Agja Neal Polishing discs diameter - 1000 mm Drive power: 7.5 kW Feed Extraction flap

Kondisi: seperti baru (mesin pameran), A demonstration belt grinder WIEGAND with two belt speeds, ideal for steel and stainless steel Iodpfx Aaopgmufs Njal Belt dimensions: 2000 x 150 mm Belt speed: 18/37 m/sec Power: 2.2/3.8 kW 400V/50Hz Weight: 110 kg Technical data and dimensions: Subject to change/errors excepted

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1984, lubang spindel: 51 mm, diameter pembubutan di atas alas geser: 575 mm, lebar di tengah: 1.500 mm, panjang pembubutan: 1.500 mm, berat keseluruhan: 2.000 kg, DRO 2 sumbu Heidenhain, kapasitas 1500x575 mm, diameter lubang spindle 51 mm, turret Multifix Iaodpfx Aew Hp Rxsa Njl

Kondisi: sangat baik (bekas), Maximum turning diameter over bed: 575 mm Ijdpfewlgdyex Aa Njal Maximum turning diameter over carriage: 525 mm Maximum turning diameter over cross slide: 300 mm Distance between centres: 2000 mm Spindle bore diameter: 51 mm Number of spindle speeds: 18 Spindle speed range: 32 to 2500 rpm Bed width: 400 mm Maximum cross slide travel: 305 mm Maximum top slide travel: 140 mm Maximum tailstock quill travel: 150 mm Overall dimensions: 3405 x 1175 x 1345 mm Machine weight: 2200 kg

Kondisi: baru, Horizontal bending machine Fastech FP 40 Description • Pressure: 40 t • Stroke: 285 mm • Max. tool height: 250 mm • Flat bar on the vertical edge: 200 x 24 mm • Working speed: 10.0 mm/sec • Return speed: 10.0 mm/sec • Working height: 930 mm • Table: 660 x 1250 mm • Total power requirement: 4.0 kW • Motor: 400 Volt 50 Hz • Weight: 1100 kg • Dimensions (L x W x H): 1250 x 650 x 1250 mm • Oil capacity: 40.0 l Features: • Hydraulic horizontal bending machine • Solid working table made of stabilized steel Iaodpfx Ajfg Eu Rea Nol • Machine constructed from hardened and ground forged steel • Digital stroke adjustment display • 1x tool set • Double foot switch

Kondisi: baru, Band width 150 mm Band length 2000 mm Band speed 30 - 34 m/sec Total power requirement 4 kW Iajdoirwwpopfx Aa Nsl Machine weight approx. 100 kg Space requirement approx. 1.2 x 0.5 x 0.85 m