Mesin bor flensa

ROTTLER PORTAL 7000

Kondisi: siap digunakan (bekas), Drilling capacity (steel): 100 mm, max. pitch circle diameter: 7000 mm, spindles: 2, spindle speed: 3000 rpm, spindle mount: ISO 50, drilling slide travel: 900 mm, feed rate: 6 m/min, power: 125 kW. Machine dimensions X/Y/Z: approx. 13,000 mm / 11,000 mm / 5,100 mm, weight: approx. 18,000 kg. On-site inspection is possible. Hodjvriq Rjpfx Aanenl

Kondisi: bekas, en_001_TechnicalDetails_2024-06-18 Hnedpfjvr S Ulox Aanjl

Kondisi: siap digunakan (bekas), The machine has been overhauled and is fully operational, complete with documentation. Hnjdpfx Aasfw Az Usnel

Kondisi: baik (bekas), Tahun pembuatan: 2015, jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 650 mm, 1 Horizontal Machining Center Manufacturer: STARRAG HECKERT, Model: HEC 400D, Year: 2015, Control system: Siemens Sinumerik 840D, Travel X/Y/Z = 650 x 650 x 650 mm, 2-station pallet changer, pallet size: 400 x 400 mm, NC rotary table 360° x 0.001°, 80-position tool changer, Tool holder HSK 63, Spindle speed: 15,000 rpm, Hodeuav H Nepfx Aanjnl Through-spindle coolant 50 bar, Chip conveyor, belt filter, coolant temperature control, spindle cooling, Soundproof and electrical cabinets, Operating hours: 43,698, spindle hours: 5,401

Kondisi: baik (bekas), Tahun pembuatan: 2014, jam operasional: 8.035 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MH0017-000100, jarak pergerakan sumbu X: 1.400 mm, jarak lintasan sumbu Y: 1.050 mm, jarak gerak sumbu Z: 1.200 mm, produsen pengendali: fanuc, model controller: 31i, jam operasional spindle: 6.000 h, Horizontal machining center Doosan NHP 8000, new, equipped with Fanuc 31i control cabinet Included equipment and options: - 800x800 mm pallet centering device - Hand-held coolant gun - High-pressure coolant system, 70 bar, 7.5 kW, with cyclone filtration - Automatic tool changer - Tool load management Hodowu Rgqepfx Aanonl - Chip conveyor - Renishaw RMP60 workpiece probe - TS27R tool probe

Kondisi: bekas, Tahun pembuatan: 2006, Technical Details: X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Spindle speed: 12,000 rpm Tool holder: SK 50 Control system: SIEMENS 840D ShopMill Tool changer: 240 positions Pallet size: 630 x 630 mm Spindle power: 52 kW / 430 Nm Total power requirement: 87 kVA Approx. machine weight: 15 t Horizontal machining center with pallet storage, NC rotary table, 2-station pallet changer, Internal coolant supply (IKZ) 40 bar, Prepared for Renishaw MP 10 infrared probe (probe not included), Mechanical tool breakage monitoring, Minimum quantity lubrication (MQL), Compressed air through spindle center, Electric oil mist extraction, Electronic handwheel, Hodpjpumdcjfx Aanenl TRANSMIT function, High-precision package, BA 4, Laminated safety glass panel on the right door, Including FASTEMS FPC 1000 pallet system for a total of 14 pallets, including setup station, stacker crane, central controller, and 10 pallets Approx. 98,500 operating hours (main switch ON) Approx. 45,500 spindle hours

Kondisi: bekas, eccentric-press-automat-haulick-roos-type-rvd-125-double-column- eccentric-press-serial-no-212560-year-1981-pressing-force-125-ton s-table-size-880-x-800-mm-table-opening-470-x-140-mm-frame-width- 900-mm-side-frame-width-415-mm-ram-stroke-45-mm-ram-adjustment-ra nge-0-80-mm-installation-height-as-shown-340-mm-strokes-per-minut e-50-to-300-main-drive-motor-power-22-kw-power-supply-380-volt-50 -hz-double-connecting-rod-drive-mechanism-with-4-fold-mounted-ecc entric-shaft-for-off-center-ram-load-side-mounted-control-cabinet -nc-roll-feeder-ebu-width-250-mm-year-2003-standalone-control-pan el-for-roll-feeder-strip-feed-direction-left-to-right-space-requi rements-press-l-x-w-x-h-3000-x-2000-x-3020-mm-transport-height-29 50-mm-weight-of-press-approx-11-tons Hedpfx Ashlnzkjanonl

Kondisi: sangat baik (bekas), Sunnen GH210 Mesin Honing Horizontal Tahun 2010 Panjang Langkah Maks.: 8000 mm Kecepatan Spindel: 0 - 300 rpm Daya Maks Spindel: 40 Hp (29,83 kW) Hjdpfxjw U Uh Do Aanonl Daya Maks Stroker: 18 Hp (13,42 kW) Rentang Kecepatan Langkah: 0 – 100 ft/menit (0 – 30,5 m/menit) Rentang Diameter Dalam: 2 – 24 inci (50,8 – 609,6 mm) Diameter Luar Standar: 26 inci (660,4 mm standar) Berat Maksimum Bagian: 8000 kg Perkiraan Berat Mesin: 12.066 kg 400 VAC 50 Hz, 3 Fasa (85 A) Kontrol Siemens Simatic,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control: SIEMENS 840 D w-axis 1500 mm Column clearance: 2500 mm Clamping surface: 3000 x 2000 mm Workpiece weight capacity: 10,000 kg Spindle speeds: 5-6,000 rpm Gear stages: 2 Drive power - milling spindle: 45 kW Distance spindle to clamping spindle: 3500 mm Hodpfx Aasvwgmmonenl Spindle torque: 1,250 Nm Tool changer capacity: 200 positions Tool diameter: 135 / 250 mm Max. tool weight: 50 kg Max. tool length: 400 mm Tool holder: ISO SK-50 The portal milling machine is in very good condition. ADDITIONAL EQUIPMENT FOR DRILLING/MILLING Angle milling head yes Automatic tool clamping yes Ball screw drives yes Guideway covers yes Coolant system yes High pressure cooling system (internal coolant supply) yes Fully enclosed work area yes Portal machining center with tool changing system and second table plate.

Kondisi: baik (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 750 mm, jarak gerak sumbu Z: 725 mm, CNC control Sinumerik 840D NC rotary table, B-axis Magazine for 320 tools Pallet changer unit, 2 pallets 500 mm x 500 mm Internal coolant supply ICS (80 bar) Chip conveyor Coolant system Technical data: X-travel longitudinal: 750 mm Y-travel vertical: 750 mm Z-travel cross: 725 mm B-axis: 360° Spindle taper: HSK 63A Spindle speed range: 50–10,000 rpm Tool positions in changer: 320 Feed rate: 60,000 mm/min Hnodpfeq Ui Hqsx Aanjl Rapid traverse: 60 m/min Spindle drive power 40/100% duty cycle: 37/24 kW Machine weight approx.: 15,000 kg Technical data, accessories and description of the machine are not binding.