Wadah

SANDERS Spänebehälter ANTHRAZITGRAU RA

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, jam operasional: 10.200 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3284, Versi standar RUF Lignum R2 dengan saluran keluar, motor listrik 22 kW, ukuran briket 150x60 mm, kapasitas hingga 500 kg/jam Hedpsyyl Srjfx Af Eop

Kondisi: sangat baik (bekas), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roll feed unit Planer moulder equipped with reinforced KASCHWIG three-sided sound insulation cabin • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed speed control (frequency regulated): 8 – 80 m/min • Feed motor: 18.5 KW • 1st bottom spindle: 11.0 KW • 2nd right spindle: 11.0 KW • 3rd left spindle: 11.0 KW • 4th right spindle: 11.0 KW • 5th left spindle: 11.0 KW • 6th top spindle: 15.0 KW • 7th bottom spindle: 11.0 KW • 8th top spindle: 15.0 KW • 9th bottom spindle: 15.0 KW • 10th universal spindle: 11.0 KW (four-sided) Hedpfx Aswvqkljf Eep • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindles equipped with NEW motor start/ brake combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven table rollers • Spindles 1 + 6 + 7 + 8 + 9 with counter bearing • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chrome plated table plates • Hard-chrome plated fences • Pneumatically assisted side pressure rollers • Automatic table lubrication • Centralised lubrication points • Freestanding control panel • Total connected load approx. 145 KW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list and circuit diagram • Machine supplied without planing heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 KG Factory-new WEINIG components installed: NEW horizontal / vertical spindles NEW counter bearings All spindles with HL bearing arrangement All motors newly fitted with bearings NEW electronic motor soft-start / brake units NEW hard-chrome plated table plates NEW hard-chrome plated fences Numerous additional NEW PARTS installed in the machine Condition: Refer to attached photos. Technically in excellent condition. Infeed mechanisation unrefurbished – complete parts – functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by prior arrangement Subject to prior sale and errors excepted.

Kondisi: baru, daya: 10,3 kW (14,00 hp), jenis bahan bakar: bensin, en01 Hedpfxoumv E Hs Af Esp

Kondisi: bekas, Tahun pembuatan: 1996, 001 Hsdpfoxx A Dmsx Af Eep

Kondisi: baru, Tahun pembuatan: 2026, 10T ramp, usable internal width 1.7 m – TM-GROUP, the best choice on the market ✅ Specification: - Manufacturer: TM-GROUP - Maximum load capacity: 10 tons - Internal ramp width: 1700 mm - Reinforced side guards on both sides - Ramp rollers for easy repositioning - Central handle for forklift positioning - Adjustable incline angle and flap height - Double-reinforced ramp supports - Movable elements equipped with grease fittings - Ramp additionally fitted with a winch - ELECTRIC and manual height adjustment ✅ Drive-over grating: Grating with anti-slip grooves ensures a safe and stable surface. Both forklifts and pedestrians have optimum traction and stability. Competitors usually offer ramps with sheet metal and mesh overlays. Our product uses grooved steel grating—a significantly more durable solution that prevents dirt from collecting on the ramp and eliminates slipping hazards for forklifts. ✅ Forklift attachment – bi-directional: Practical and quick mounting for forklifts allows transport of the ramp in any direction. The specially designed handle enables precise maneuvering even in tight spaces. ✅ Chain for connection to truck, railcar, or fixed warehouse platform: A heavy-duty steel chain further increases safety, preventing the ramp from shifting during loading and unloading operations. ✅ Sturdy side rails: Protective rails with the option for removal and conversion to a frame/roof structure (roof optional). ✅ Electric height adjustment: Smooth electro-hydraulic system with high-quality pump. Operates with standard 230V power—can be connected to any regular socket. ✅ Dual-action hand pump: Hydraulic pump for height adjustment when no power is available—lifting action possible from both sides. Ideal for use in all conditions. ⭐️ Available variants: ⭐️ - Drive-over widths: 1700 mm, 2000 mm, and 2500 mm – Standard, Premium, and Premium Plus - Mobile ramps with load capacities of 10, 15, 20, and 25 tons - Grating thicknesses: 3 – 5 cm - Colours: red, blue, black, green (custom colours on request) Hjdpfx Afowa Nr Nj Eop - Mobile ramp with cover/tarpaulin As the manufacturer, we also offer custom designs built to your specifications—in various sizes, load capacities, and configurations. Looking for a tailor-made solution you can’t find anywhere else? Contact our specialists! Keywords: Loading ramp, unloading ramp, drive-over ramp, mobile ramp, loading bay, transfer ramp, mobile loading ramp, mobile drive-over ramp.

Kondisi: baik (bekas), Tilting spindle moulder, table router, table milling machine - Spindle adjustment: height and angle - Tilting range: -3° to 45° - Motor power: 4.5/5.5 kW - Speeds: 3000/4500/6000/9000/12000 rpm Hodpfeh Nvyzjx Af Eop - Power feed unit Holz-Her, 3 rollers - Usable shaft length: 100 mm - Spindle diameter: 30 mm - Max. cutter diameter: 220 mm - Dimensions (L/W/H): 1540/1100/1520 mm - Weight: 962 kg

Kondisi: baru, Cutting diameter: 170 mm Bandsaw blade dimensions: 2080 x 20 x 0.9 mm Table height: 880 mm Cutting speed: 40 + 80 m/min Cutting capacity at 90° round: 170 mm Cutting capacity at 45° round: 125 mm Cutting area at 90° rectangular: 150 x 190 mm Cutting area at 45° rectangular: 95 x 120 mm Total power requirement: 1.1 kW Machine weight approx.: 0.24 t Dimensions (L x W x H): 870 x 1,550 x 1,740 mm Hedpfx Asg Trvrsf Eop This metal bandsaw is equipped with an enclosed worm gear drive. Additionally, it features hydraulic pressure regulation and a base frame rotatable by 45 degrees. Other features include emergency stop, a complete cooling system, the factory base frame, automatic shut-off, and a quick-release device.

Kondisi: bekas, Tahun pembuatan: 2008, Without briquetting press Filter area 32 m² with hopper transition to container or connection to rotary valve Used, in excellent condition, low operating hours Manufacturer: Schuko Model: Vacomat 300 Year of manufacture: 2008 Clean air unit / negative pressure GS dust-certified, BIA-tested CE type-tested Motor: 7.5 kW Connection diameter: 300 mm Pressure (Pa): 3090 Airflow: 5,800 m³/h Control system included Filter pressure monitor Fire extinguishing system: powder extinguisher Original price approx. EUR 17,000.00 Space requirements approx. 3,600 x 1,590 x 2,550 mm / 4,400 mm without hopper Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, Hodpfx Aevxlqmjf Eep without warranty or guarantee

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MT5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivelling 360° Grinding headstock swivelling 180° ± Grinding spindle speeds 1500, 1700, 2200 rpm Plunge feed: incremental 0–9.99 mm/Ø Plunge feed: continuous 0–9.99 mm/Ø Table swivelling ±8° Longitudinal table travel 1100 mm Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Cross travel max. 270 mm Workpiece weight max. (flying) 130 kg incl. clamping Internal spindle mounting 80 mm Tailstock quill mounting MT3 Quill travel 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Hedpfx Afsuxfupe Eop Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo shows a previously delivered machine. -The touch panel operation is extremely user-friendly. -The icons on the control panel are virtually identical to the original control, so no retraining is required. -Diagnostic function with display of PLC messages and digital I/Os. -Dressing function can be extended or modified to customer requirements. -Workpiece spindle oriented stop available on request. -New maximum infeed amount: 40 mm, extendable upon request. -Digital display on 2 axes. X-axis resolution 0.5 µm. Options: -Encoder with digital display on the workpiece headstock -Encoder with digital display on the grinding headstock (no height adjustment with spindle possible) -New stable internal grinding attachment diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for grinding spindle Includes: -Operating tools -Clamping tube for chuck Further accessories available upon request. The machine is equipped with an electronically controlled feed system in the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face and internal grinding in a single setup of individual parts. Available options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measuring control At the present time, the machine tool does not comply with the essential safety and protection requirements as specified in the BetrSichV 2015. The required minimum safety objectives must be determined by a risk assessment in accordance with the BetrSichV.