Pabrik pelapis bubuk industri
SAPI GmbH Pulverbeschichtungsanlage Komplettsystem für industrielle

Name: SAPI GmbH Pulverbeschichtungsanlage Komplettsystem für industrielle
Brand: SAPI GmbH Pulverbeschichtungsanlage
Availability: InStock

Kondisi

Baru

Lokasi

Möttingen

Pabrik pelapis bubuk industri SAPI GmbH Pulverbeschichtungsanlage Komplettsystem für industrielle

SAPI GmbH Pulverbeschichtungsanlage Komplettsystem für industrielle

Tampilkan peta

Data mesin

Nama mesin:: Pabrik pelapis bubuk industri

Pabrikan:: SAPI GmbH Pulverbeschichtungsanlage

Model:: Komplettsystem für industrielle

Kondisi:: baru

Harga & Lokasi

Lokasi:: Enkinger Weg 4, 86753 Möttingen, Deutschland

Hubungi

Rincian penawaran

ID iklan:: A17167487

Pembaruan:: terakhir pada 17.03.2025

Deskripsi

The perfect coating for long-lasting protection.

Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder consisting of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating.

Rsdpeun Sd Ujfx Ahwop
To achieve optimum adhesion and durability, the substrate is thoroughly cleaned and prepared beforehand. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is essential for the powder to bond effectively with the substrate and to achieve a robust, long-lasting finish.

Components of a Powder Coating System
A powder coating plant typically consists of various components and equipment required for the application and curing of powder coatings.

Spray Booth and Application Area
The booth provides a clean environment for the application process and ensures even distribution of the powder.

Powder Coating Gun
A powder coating gun is used to apply the powder coating material to the workpiece.

Powder Feed System
The powder feed system consists of a hopper or container where the powder coating material is stored. It usually includes devices such as powder pumps, feed hoses, and powder sieves to convey the powder from storage to the spray gun.

Pretreatment Equipment
Pretreatment equipment is used to prepare the substrate before powder coating application. This includes processes such as cleaning, degreasing, rinsing, and surface treatment to ensure optimum adhesion and coating durability.

Curing Oven
A curing oven is an essential part of a powder coating system. It is used to heat the coated substrate to the proper temperature, allowing the powder coating to melt, flow, and harden into a durable surface. The oven typically features a conveyor system or racks to transport coated parts through the oven chamber.

Extraction System
An extraction system is installed in the facility to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe working environment for personnel and prevents powder particle accumulation in the air.

Looking for a powder coating solution?
Are you searching for a tailored powder coating system?
We specialize in delivering custom powder coating solutions tailored to your specific requirements. Whether you have particular color specifications, intricate designs, or challenging substrates, our experienced team is ready to deliver exceptional results.

Contact us today to discuss your requirements and let us design a bespoke powder coating solution for you.

Get in touch with us today!

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2022

20 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 9083 ... iklan

Faks:

Simpan

Bagikan Laporkan iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Mesin pembengkok cincin & profil OSTAS OPK-85

Enschede

11.244 km

Mesin pembengkok cincin & profil
OSTASOPK-85

Hubungi

Iklan kecil

Dudukan pers tinju otomatis BEUTLER NOVA C 1000

Plettenberg

11.196 km

Dudukan pers tinju otomatis
BEUTLERNOVA C 1000

Hubungi

Tahun pembuatan: 2003, Kondisi: bekas, Press force 100 t Stroke 10-130 mm Strokes per minute 30-90 spm Throat depth 330 mm Ram adjustment 100 mm Table area 950x660 mm Ram area 540x440 mm Passage opening in table Ø 230 mm Table height 1000 mm Ram bore Ø 50 mm Total power requirement 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Beutler Datatech press control Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Rsdpfjra Rr Eex Ahwjp Manual ram adjustment Two-hand operation Foot operation GSW straightening and feed machine VRMA 40/78, year of construction 2003 Feed controller HDS 50 BSA decoiler NO20/400V-AP

Lihat detail

Iklan kecil

Langkah Demi Langkah Sistem Pengecatan Basah PROTON STP-STP

Luckenwalde

10.822 km

Langkah Demi Langkah Sistem Pengecatan Basah
PROTONSTP-STP

Hubungi

Kondisi: baru, Step-by-Step Painting Systems Elboy Industrial Solutions designs and manufactures a broad range of paint shops tailored to your products. With ELBOY, you can use virtual reality during the design phase to navigate through your facility, allowing you to implement desired modifications at this early stage and avoid unexpected outcomes later on. We provide engineering and manufacturing services for your application, with particular emphasis on environmental protection and occupational safety across processes such as sandblasting, filling, washing, priming, and top-coating for all product sizes. Step by Step systems are available with overhead conveyors or floor conveyors and can be configured to accommodate products of any size. Rodpedy Dw Asfx Ahwep Booths for sandblasting, chemical washing, pre-coating, drying, filling, top-coating, and curing can all be integrated into the system. To carry out the processes specified by the system in sequential steps, automatic doors open upon completion of each process, and the product automatically advances to the next processing station. These fully automated systems are operated via a 15-inch touchscreen and offer various reporting options, such as main computer monitoring, product reporting, outcome reporting as required, and remote control. These are paint shops that are engineered and manufactured by our specialists according to your capacity, operational requirements, and other specifications. For requirements such as electrostatic powder coating, wet coating, sandblasting, painting, coating, washing, and similar systems, maximum efficiency is achieved with minimal staffing and optimal use of space.

Lihat detail

Iklan kecil

Luckenwalde

10.822 km

Pabrik bubuk transfer bar
Proton

€320.000

EXW VB ditambah PPN

Hubungi

Kondisi: bekas, Tahun pembuatan: 2014, ⚡️ Top service ⚡️ Fast delivery ⚡️ Excellent support! ✳️Preserve your liquidity! We offer a wide range of financing models to ensure your investment gets the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs.✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ✅Scope of supply ►1 unit – Large gas-heated powder curing oven ►1 unit – Automatic powder coating booth ►1 unit – Small electrically heated powder curing oven ►1 unit – Manual mono-cyclone powder coating booth ►1 unit – Room-type manual mono-cyclone powder coating booth ►1 unit – Automatic chemical pre-treatment and drying line ►6 units – Automatic powder coating guns ►3 units – Manual powder coating guns ►1 unit – Automatic powder recovery unit ►5 units – Mono-cyclone ►1 unit – Automatic control panel ►1 unit – Automatic bar transfer system, speed controlled ►2 units – Mobile platform, speed controlled ►12 units – Parking station ►300 m – Conveyor rail Redpsiivq Ujfx Ahwop ►12 units – Suspension bars Our facility is located at Anhaltstr 30, 14943 Luckenwalde. You are welcome to schedule an appointment to view the equipment. The system has been in operation for 8 years. As the direct manufacturer of the plant, we can, by mutual agreement, carry out modifications to the machines as you require. Doesn't fit into your existing installation space? We can adjust the layout accordingly. Please check the system's PDF file using the link below.

Lihat detail

Iklan kecil

Flanging dan jahitan mesin Rolling OSTAS KMRP-1,2

Velen

11.245 km

Flanging dan jahitan mesin Rolling
OSTASKMRP-1,2

Hubungi

Iklan kecil

Broderstorf

10.850 km

Gergaji pita
MEP452 SXI EVO

Hubungi

Kondisi: bekas, Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, For sale is a used, fully functional semi-automatic mitre band saw machine. Cutting capacities: 0° 330 mm 320 mm 450 x 320 mm +45° 320 mm 300 mm 300 x 300 mm +60° 210 mm 200 mm 200 x 200 mm -45° 320 mm 300 mm 300 x 300 mm -60° 210 mm 200 mm 200 x 200 mm Max. vice opening: 455 mm Blade dimensions: 4500 x 34 x 1.1 mm Main drive power: 4.0 kW – three-phase Blade speed: 15 – 100 m/min Rjdpfxowigave Ahwop Accessories: 4.5 m roller conveyor, various saw blades

Lihat detail

Iklan kecil

Bilik pelapis bubuk Bumex Sp. z o.o. Myjnia 3 etapowa

Bliżyn

10.308 km

Bilik pelapis bubuk
Bumex Sp. z o.o.Myjnia 3 etapowa

Hubungi

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, BUMEX SP. Z O.O. – Automatic Parts Washing System for Pre-Powder Coating Preparation Rodpfx Ahshfv D Sjwjp Working Dimensions: 1500 x 3200 x 2200 mm Chemical tanks heated by oil, gas, or electricity, Fluid tanks with capacities from 1500 to 2000 liters, 3 processing stages, Operating temperature up to 60°C, Fully automatic control system, Prefilter for collecting contaminants, Constructed from acid-resistant sheet metal, grade AISI 1.4301. Our equipment stands out for its superior build quality, operational safety, and the ability to tailor cabin parameters to fit your existing premises. We provide expert advice on selecting paint booths, dust extraction units, exhaust systems, and industrial heat recovery solutions. CHOOSE BUMEX SP. Z O.O. Top-quality machines among those available on the market. Professional consulting and support. Warranty. Warranty and post-warranty service. Comprehensive technical documentation. All BUMEX SP. Z O.O. products are EC certified. We offer our own transportation – prices are individually determined for each offer. VAT invoices are provided. Short delivery times! Machines can be customized with various configurations and dimensions according to your requirements! Contact us for more information.

Lihat detail

Iklan kecil

Meja las kein Demmeler Siegmund Protec Lochtisch

Hergensweiler

11.140 km

Meja las
kein Demmeler SiegmundProtec Lochtisch

€1.500

harga tetap ditambah PPN

Hubungi

Kondisi: baru, Tahun pembuatan: 2025, kapasitas angkut: 1.000 kg, Various very heavy-duty welding tables, machined, some plasma-nitrided Sizes: - 1 x 1 meter, €1,500 Rjdpfxowu Exzs Ahwjp - 1.2 x 1.2 meters, €1,700 - 1.5 x 1.5 meters, €1,900 - 2 x 1 meter, €2,300; plasma-nitrided €3,300 - 2.4 x 1.2 meters, €2,900; plasma-nitrided €3,900

Lihat detail

Iklan kecil

Sistem bedak dengan 3 zona pra-perawatan Handelsagentur Klaus Benecke Durchlaufanlage halbautomatisch

Sprockhövel

11.238 km

Sistem bedak dengan 3 zona pra-perawatan
Handelsagentur Klaus BeneckeDurchlaufanlage halbautomatisch

Hubungi

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya: 88 kW (119,65 hp), suhu: 220 °C, kapasitas pemanasan: 30 kW (40,79 hp), tinggi benda kerja (maks.): 1.500 mm, panjang benda kerja (maks.): 500 mm, bahan isolasi: Steinwolle, ketebalan isolasi: 150 mm, lebar benda kerja (maks.): 500 mm, Scope of supply: 1. Chemical pre-treatment by spraying (in step-by-step operation) 2. Dryer 3. Powder coating system 4. Powder curing oven 5. Semi-automatic conveyor system 6. Electrical control system Building / Installation area Maximum system footprint: 12,000 x 6,500 mm Floor type: Industrial floor Workpiece sizes Max. part dimensions: L = 500 mm, H = 1,500 mm, W = 500 mm Parts spectrum: Steel Conveying technology P&F (Power & Free): Chain conveyor, step-by-step operation, semi-automatic Pre-treatment Chemical Energy supply Electricity: Supplied on-site (max. 88 kW) Gas: Supplied on-site Compressed air: Supplied on-site Water: Supplied on-site Calculation System type: Step-by-step line Conveying speed: 3.2 metres/min Step length: L = 1,600 mm Time for conveying movement: Tm = 1.6 metres : 3.2 metres/min = 0.5 min Dwell time per step: Ts = 8.5–12 min Total cycle time: Tt = Tm + Ts = 9–12.5 min Redpfoulwg Nox Ahwjp Electric power: Total capacity 88 kW Min. average consumption: 60 kWh Max. average consumption: 70 kWh

Lihat detail

Iklan kecil