Perangkat jet hisap injektor-belakang PR 50

SAPI GMBH Rücksaug - Strahlgeräte Sandstrahlmaschine mit Absaugung

Kondisi: baru, Tahun pembuatan: 2025, Innovative dust-free sandblasting machines combine the performance of conventional sandblasting with a vacuum system that captures all dust and removed material during operation. This not only eliminates the need for extensive cleaning work, but also protects the operator and people nearby from the harmful effects of airborne particles. With a dust-free sandblasting device, you can carry out cleaning and surface preparation faster and more efficiently. Thanks to intuitive controls and user-friendly design, these machines are also easy to operate, even for beginners. ✅ DINO II & DINO MASTER Available in 60 and 100 litre versions The SAPI "DINO" pressure vacuum sandblasting machine is a compact and universally applicable unit, featuring a robust construction and high mobility. The blasting performance depends on various factors such as surface condition, compressor capacity, type of abrasive, etc. The cleaning capacity ranges from 3 to 10 m² per hour. Overall, this device offers the operator a clean working environment, low abrasive consumption (thanks to the vacuum recovery unit), and reduced disposal costs. The unit is used in the steel, shipbuilding, and oil industries, as well as for maintenance work in the construction sector, by stonemasons, and more. Ffjdpfx Adowc Rg Hegot

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2 t Reeving 4/1 Ffedevx E Ncjpfx Adgst Lifting height 10 m Lifting speeds 5/0.8 m/min Trolley travel speeds 20/5 m/min FEM group 2M Operating voltage 400 V Control voltage 230 V Flange width 300 mm Immediately available from stock

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SAPI Jumbo, tekanan: 12 batang, lebar total: 3.087 mm, tinggi total: 2.078 mm, panjang total: 3.692 mm, berat keseluruhan: 3.000 kg, lebar dalam: 2.340 mm, panjang dalam: 3.520 mm, tinggi dalam: 2.500 mm, berat benda kerja (maks.): 500 kg, luas filter: 20 m², Perlengkapan: pencahayaan, This fully operational, assembled, walk-in JUMBO blasting cabin offers a comprehensive solution for efficient blasting operations. Equipped with 2 LED blast chamber lights, it ensures optimal illumination of the work area. The double-winged door allows easy access and handling of larger workpieces, while the blast-resistant rubber lining on the walls protects the interior from wear and extends the cabin’s service life. For air filtration and dust reduction, the cabin is fitted with a powerful cartridge filter and an impact separator, ensuring a clean working environment. The flat conveyor system in the floor with grating cover provides automatic recovery of the blasting media, and the electrically powered drive unit for the conveyor system guarantees smooth operation. Additionally, the cabin is equipped with a bucket elevator and a high-performance media reclaimer to efficiently process and reuse the blasting media. The pressure blast vessel with a capacity of 38 liters offers sufficient volume for extended work cycles. The scope of delivery also includes a 10-metre blasting hose and a durable boron carbide nozzle, ensuring optimal blasting results. This blasting cabin is ideally suited for companies seeking a reliable and efficient solution for blasting applications. *Special equipment such as loading trolleys is also available on request* Compressed air and electrical supply, as well as installation, are to be provided by the customer. Ffedpfjukdfpex Adgot If we have aroused your interest, please feel free to contact us at any time!

Kondisi: baru, Tahun pembuatan: 2024, it_en_001 Fodpfx Adjfh R N Dogjft

Kondisi: baru, Tahun pembuatan: 2026, The ERBA EVP-RA 350 vibratory finishing machine features an inclined working bowl bottom with integrated part/media separation. It is equipped with a quickly exchangeable screening unit and achieves high operational efficiency thanks to its integrated drop step. Discharge and separation are performed via the built-in flap (manual/pneumatic). Upon request, reinforced suspension and a more powerful motor can be installed for heavier-duty applications. The motor speed can be continuously adjusted via an optional frequency inverter. The EVP-RA 350 can be linked with other machines thanks to the side discharge option. The unit can be equipped with a fully automatic PLC control system (optional). ERBA vibratory finishing systems are renowned for their durability and longevity, ensured by the hot-cast polyurethane lining of the working bowl. Technical Data: - Gross volume: 385 liters - Working channel width: 340 mm - Imbalance motor power: 2.2 kW - Speed: 1,400 rpm - Inner bowl diameter: 1,200 mm All prices are net, plus the currently applicable statutory VAT and shipping costs. Some of the images may show the machine with optional accessories, which are available on request and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to provide you with free and non-binding advice. Fjdpfxsn Ut Uro Adgoft The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This listing serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunications (email, telephone, messaging portal). In the first step, we provide you with a non-binding quotation, along with information about our general terms and conditions, imprint, and the right of withdrawal, before any purchase/contract is concluded.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2020, nomor mesin/kendaraan: 2020xxx, Model UR10 CB3 – tahun 2020 – barang display seperti baru – dengan kemasan asli Berat robot: 28 kg Kapasitas angkut: 10 kg Jangkauan maksimum: 130 cm Sertifikasi: IP54 Konsumsi rata-rata: 250 W Repeatabilitas: ±0,1 mm Kecepatan linier: 1 m/s Harga: €17.000,00 + PPN Fsdpfxjq Svcco Adgeft

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tekanan kerja: 350 batang, tekanan: 350 batang, bahan bakar: diesel, daya: 3 kW (4,08 hp), New High-Pressure Unit Looking for a new high-pressure (HP) unit? We custom-build them to your specifications. Here, we present our newest HP unit, which is unique in the market—a true all-rounder, not offered in this configuration by anyone else! Specifications VIHT2350/20/40/100 (demo) Ffedpfjrnkgiex Adgst Motor: 30 kW at 1500 rpm / 36 kW at 1750 rpm 2 x Mazzoni pump, 21 liters per minute per pump at 1450 rpm, set to 350 bar. The low speed ensures the motor runs quietly and smoothly. Pressure regulation via RPM control and manual setting of 2x Zero 350 valves. Hoses are virtually pressure-free (10 bar) when the spray gun is closed. This provides safe operation, as hoses and pumps remain depressurized until the handle is opened, building up pressure only when needed. 2 x burners for producing hot water up to 120°C. On request, V+ Steam option available, reaching 140°C at the nozzle. This machine enables two operators to work simultaneously and independently—each with different temperature and pressure settings. The drive system is specially developed for a long service life and easy maintenance. On board: 2 diesel tanks, 1 x 90 liters for the engine and 1 x 90 liters for the burners. Designed for 24/7 operation. Fitted with 2 water tanks, each 325 liters, providing a total water supply of 650 liters. The Vibemo easy start panel protects against overheating and low oil level (engine shuts off) and provides error indication. Additional safety for low water level and open valve during operation. You can also monitor operating hours, RPM, and alternator charge current here. Temperature control is user-friendly, displaying set and actual temperatures. As standard, a 3-way valve is included, allowing operation at 350 bar and 40 liters per minute (also with hot water up to 100°C max)—making it suitable for sewer cleaning or barn cleaning. Further equipped with emergency stop, interior lighting in engine and reel compartments. Hose reels and burners are made of high-grade stainless steel. All hoses are 50 meters in length as standard. Equipped with pre-water filter and intermediate filter per pump. Accessories: 2 spray guns, 2 flat-jet lances (25°, 20 l/min), 2 dirt blaster lances (20 l/min), 1 flat-jet lance (25°, 40 l/min), 1 dirt blaster lance (40 l/min), 2 pressure gauges for reading set pressure. 3 level sensors for diesel and water tanks for a neat, clear overview. All built into a tandem-axle trailer 2500 kg, (LxWxH) 300x150x150 cm. Supplied with 1-year warranty and full service package. Lead time approx. 6–8 weeks. Photos are for reference only; actual machine may differ slightly.

Tahun pembuatan: 2024, Kondisi: baru, The Wattsan 100W is a brand-new portable laser metal cleaning machine. Thanks to its air cooling system, the device is quite compact. It operates quietly, quickly, and is also very user-friendly for beginners. It is ideal for removing rust, paint, petrochemicals, oxide layers, weld slag, carbon deposits, and more from metal parts. This portable unit can also clean adhesive and galvanized materials as well as plaster and stone products. With its pulse cleaning technology, the machine can remove thick layers of rust, paint, petroleum products, oxides, slag, and carbon deposits from metals without heating or damaging them. For further information, feel free to call our managers! Key features of the Wattsan Cleaning 100W: - Cooling: Air - Laser power: 100 W - Machine dimensions: 750x600x680 mm - Laser source: JPT - Weight: 46 kg Virmer not only offers top-quality machines, but also provides service and delivery. Our engineers and managers are ready to answer all your questions and, if needed, offer video support. Additionally, Wattsan device owners benefit from lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official distributor for Wattsan. We supply not just laser engravers, but also metal cutting machines, welding units, marking devices, and cleaning systems. Wattsan is a Chinese manufacturer that has been producing laser equipment for nearly 15 years, continuously developing its products with the help of customer feedback. Thanks to this feedback, Wattsan has implemented over 50 upgrades, making their machines more reliable, precise, and powerful, so you can take your business to the next level. YOU CAN WRITE OR CALL US! WE WILL CHOOSE THE RIGHT MACHINE FOR YOUR TASK. If you are looking for a suitable laser or CNC milling machine, we are happy to assist you. Ffsdper Hbwkefx Adgot We offer a wide selection of laser machines and accessories: CO2 laser machines; metal laser cutting machines; laser metal cutters; fiber metal lasers; fiber laser engraving machines; CNC metal milling machines; woodworking milling machines; CNC routers; laser engraving machines; laser engravers; plywood laser cutting machines; laser engravers; metal laser cutting machines; CNC milling machines; laser markers; lenses; chillers; machine cooling systems; S&A chillers; IPG laser sources, MAX Photonics, Raycus; compressors; rotary devices; mirrors for laser machines.

Tahun pembuatan: 2023, Kondisi: baru, PLASMA CUTTING MACHINE MODEL MTX 1500/3000 Construction: steel + aluminum Overall dimensions: 3350/2200/1300 mm Working area: 3100/1520/140 mm XY axis drive with dual-side gantry drive: 4Nm stepper motors with gear units, rack and pinion (accuracy class 8) Z axis drive: stepper motor with ball screw Traverse speed: up to 25 m/min Z axis control system: THC My plasm system Collision protection system safeguarding the torch against damage Linear guides: TBI Automatic material detection system Power supply: 240V Maximum load capacity: 1700 kg Net weight: 1200 kg INCLUDED IN THE SET: Fodpfxeh Rabne Adgeft - Control console - Water table - Exchangeable grate - Control software in German, English, and Polish - CE declaration of conformity - Technical documentation (DTR) - Warranty It is possible to select a suitable Hypertherm plasma source tailored to your company’s individual requirements.

Kondisi: baik (bekas), Maschine Typ Hakenstrahlanlage 250 kg TOSCA TS-250 Typ: Hakenstrahlanlage Max. Werkstückdurchmesser: 1000 mm Max. Werkstückhöhe: 1500 mm Max. Werkstückgewicht: 500 kg Maschinenöffnungsbreite: mm Anzahl Turbinen: 2 Turbinen-Typ: 360 Turbinenraddurchmesser: 360 mm Turbinenleistung: 7,5 kW Max. Turbinenförderleistung: 105 kg/min Fördergleistyp: Y Reinigertyp: Luftabscheider Fundament: nicht erforderlich Fsdpfx Adevpgq Nsgsft Gehäuseschutz: Mangan + Gummi Erforderlicher Luftdurchsatz: 3.000 m³/h Max. installierte Anschlussleistung: ca. 19 kW Gesamtgewicht der Maschine: 0 kg Gesamtbreite der Maschine: mm Gesamthöhe der Maschine: mm Gesamtlänge der Maschine: mm Die Maschine befindet sich in einer vollständigen Generalüberholung. Sämtliche beschädigten Komponenten werden durch Neuteile ersetzt, Turbinen werden komplett überholt, neue Lackierung RAL 7037/2000. Die Maschine wird in einem Zustand ausgeliefert, der einem Neugerät entspricht. !!! ZUSTAND WIE NEU !!!