CNC Profilbearbeitungszentrum

Schüco AF 300

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, manufacturer: Elumatec Model SA/ SAS 142 overhauled: 2024 Max. carbide saw blade: 500 mm Saw motor drive power: 4 kW Saw motor speed: 2800 rpm Saw blade cutting speed (500mm): 4400 m/min Saw height adjustment: stepless, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 150 mm Pneumatic feeding length: 5-560, 10-1120 mm Compressed air connection (site): 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2900mm x 1400mm x 1500mm Footprint LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4kW Retrofit Elumatec SA 142 4kW Retrofit Fully automatic saw for non-ferrous metals and plastics The machine is in as-new technical and optical condition following completion of the retrofit. The machine will be fully overhauled in our workshop according to customer requirements. The following components, among others, have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - New electrical components - New pneumatic hoses - Maintenance or replacement of all pneumatic cylinders and valve terminals - Minimum lubrication system maintenance - Replacement of general wear parts - Refurbishment of safety enclosure/cabinet Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Options: - Expansion of cutting range (flat 90° max.: 300 x 120 mm) Fpedpfouiy Nysx Aaqjg - Chip breaker expansion (for high-quality cut surfaces without return marks) - Servo-driven material feed - Servo-driven saw blade feed - Quick clamping device for rear feed stock - Delivery and installation at your location - Training of your staff

Kondisi: baik (bekas), Tahun pembuatan: 2009, Elumatec SBZ 140, Extended Length: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety enclosure Light curtains Automatic clamp detection Central lubrication Cooling spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F adapter, 8-position tool changer. Max. milling diameter: 80 mm Max. saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). Designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilting/rotating A-axis) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis feed rate: X-axis up to approx. 65 m/min, Y and Z axes up to approx. 60 m/min (depending on configuration) Control: 4-axis CNC system, with PC control, color display, USB & network connection. Software: eluCam. Automatic material clamps, automatic positioning via dowel pins. Pendulum/shuttle operation (two work zones), increasing production throughput. Applications include milling, drilling, tapping, sawing, and comprehensive profile processing—all with profiles clamped in a stationary position. Fedpfxjx E Ahze Aaqepg Please note: The information on this page has been gathered and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, this does not constitute a representation or contract, and we advise you to verify all relevant details. Financial information VAT/Margin: VAT: The listed price is excluding VAT (VAT deductible for businesses).

Tahun pembuatan: 2018, Kondisi: baik (bekas), For machining aluminium and steel profiles Fully functional and in very good condition Processing length: 7200mm 3-axis control with 15” screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control device Safety light curtain at the front and side safety fence Minimum quantity lubrication Centralised lubrication Thread cutting without floating holder Simple programming via the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Traverse speed X-Y-Z axes [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Fpsdpfx Aasx Diqwjqsg Total power-on hours: 30,844 h Total spindle hours: 11,583 h

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar feeder, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for brass parts! CNC turning and milling center | EMCO HYPERTURN 665 MC Plus with main and sub-spindle, C and Y axes, 2x turrets with 12 driven tool stations each! Technical specifications: Swing diameter over bed: 600 mm Swing diameter over cross-slide: 500 mm Control: Siemens Sinumerik 840 D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm X-axis travel: 270 mm Z-axis travel: 750 mm X2-axis travel: 205 mm Z2-axis travel: 750 mm Y-axis travel: 100 mm (+/- 50 mm) Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Turrets: 2x 12 stations, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axis Lower turret: X, Z axis Sub-spindle left/right movement: Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with parts ejector Turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tool cabinet with driven and static tool holders, carbide inserts, and toolholders Collet chucks for main and sub-spindle Fpedpfxsxzq Nce Aaqog Complete documentation etc. Machine available immediately! Machine ready for operation! We will load the machine! Transport can be organized upon request!

Kondisi: baik (bekas), Tahun pembuatan: 1992, Single-piece sanding machine Fsdpfx Aaewyda Uoqepg Top and bottom sanding Electric height adjustment with digital display Continuously adjustable feed speed Star-delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brush unit, top and bottom, manual height adjustment Working width: 190 mm Working height: 4 – 150 mm Min. workpiece length: approx. 280 mm Sanding belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 – 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Specifications are subject to errors and prior sale. • Stated prices are ex-works, loaded free of charge. • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and phone number!)

Kondisi: bekas, Tahun pembuatan: 2015, Vertical CNC machining center with 3 controlled axes and an exceptional Y-axis machining capacity. Equipped with a vacuum-table clamping system that secures panels and sheets using vacuum pressure, this solution is especially efficient when processing thin components that are difficult to clamp with conventional systems. The machining center features a set of valves allowing different table zones to be activated or deactivated, thereby focusing vacuum in a specific area and optimizing the clamping of small parts. Fpsdpfx Aev D A Imeaqog Capable of interpolated milling and drilling operations on composite panels, aluminum, steel or titanium sheets, and aluminum profiles. Tekna provides user-friendly software, suitable both for experienced CNC programmers and users with less experience. The TKE 783 is a 3-axis machining center designed for interpolated drilling and milling on composite panels, aluminum, steel or titanium sheets, and aluminum profiles. Technical specifications: Model: Tekna TKE783 Year of manufacture: 2015 Power: 29 kW Worktable dimensions: 2010 x 6300 mm Weight: 4842 kg Feed rates: X axis 70 m/min; Y axis 55 m/min; Z axis 30 m/min Software: Windows, Embedded, Teach-in software CAD/CAM 2D NC TOOL Made in: Italy Other details: Previously used for milling aluminum up to 4 mm thick. The machine is connected and can be seen in operation and tested in Estonia. It will be prepared for transport in April–May. If you have any additional questions, we will be happy to assist you.

Kondisi: baru, Tahun pembuatan: 2026, Vollautomatisches Schneiden von mittelgroßen bis großen Aluminiumprofilen mit benutzerfreundlicher Automatisierung. Legen Sie einfach ein beliebiges Aluminiumprofil ein – die Maschine erkennt es automatisch und schneidet es mithilfe hochpräziser Servomotor-Positionsregelung entsprechend der im Auftrag festgelegten Maße. Excel-Auftragslisten können bequem per WLAN eingelesen werden, wodurch große Schnittlisten effizient verarbeitet werden. Für jedes auf das Förderband gelegte Aluminiumprofil, unabhängig von der Länge, misst ein Lasersensor die tatsächliche Profilänge. Unser leistungsstarker Optimierungsalgorithmus berechnet in Echtzeit die produktionsoptimale Schnittreihenfolge, um Verschnitt auf ein Minimum zu reduzieren. Der Zuschnitt erfolgt vollautomatisch entsprechend der berechneten Schnittliste – ohne Unterbrechung. Kein zusätzlicher Bedienereingriff notwendig, legen Sie einfach fortlaufend weitere Aluminiumstangen zu. Die Maschine ist eine schnelle und unkomplizierte Alternative zu Doppelgehrungssägen: Geben Sie einfach die gewünschten Längen und Winkel manuell ein oder importieren Sie diese und starten Sie den Prozess. Die Maschine fertigt Ihre winkeligen Zuschnitte hochpräzise und in kurzer Zeit. • Vollautomatischer Schneidbetrieb mit Profilzuführung und Längenzuschnitt • Einfache Benutzeroberfläche für automatische Bedienung – Auftrag eingeben und innerhalb von Sekunden starten • Vereinfachter Zuschnitt von Einzelteilen, Serienaufträgen oder umfangreichen Excel-Auftragslisten • Bündel-/Mehrfachstab-Zuschnitt und Stückzählung • Fernübertragung von Excel-Arbeitslisten via WLAN mit umfassender Datenzuordnung • Flexibel einstellbare Schnitt- und Vorschubgeschwindigkeit für maximale Prozessproduktivität • Automatischer Optimiermodus inklusive laserbasierter Längenmessung und Restholzoptimierung für minimalen Verschnitt (optional) • Automatisches Etikettendrucken für Zuschnitte basierend auf Auftragsdaten (manuelles Applizieren der Etiketten, optional) • Direktdruck auf das Material inline – keine Bedienhandlung notwendig (optional) • Barcodelabel- oder QR-Code-Druck/bzw. -Erfassung zur Auftragsübermittlung (optional) • Automatisierte Servo-Verstellung des Sägegehrungswinkels bis zu ±75° (optional) Hervorragend geeignet für: • Fenster- und Türenfertigung • Produktion von Gehrungs-Aluminiumkonstruktionen Fodpfef Ekn Djx Aaqepg • Fertigung von Aluminiumbauteilen • Produktion von Verbundwerkstoffen • Herstellung von Jalousien, Rollos und Möbelteilen • Verkauf von Aluminiumhandel Modell: A550 Länge: 6 m Lineareinheit: ProfiStop Alpha Materiallänge: 4680 mm Schubkraft: 20 – 40 kg Software: Optimierer QUALITÄT – MASCHINEN AUS AUSTRALISCHER FERTIGUNG.

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800 rpm. An on-site inspection is possible. Fpsdpfowu Ez Nox Aaqog

Kondisi: baru, Saw blade diameter: 370 mm Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 100 mm Cutting range at 90 degrees: rectangle 180 x 100 mm Working height: 925 mm Saw blade speeds: 15 - 70 rpm Total power requirement: 1.8 / 2.2 kW Machine weight: approx. 0.71 t Space requirement: approx. 1.9 x 1.45 x 2.1 m SPECIAL PRICE!!! High-performance vertical circular saw, fully automatic hydropneumatic version. (20192) - Mitre cuts: left 60° / right 45° - Hydro-pneumatic saw unit control - Electro-pneumatic material feed unit - Smooth-running, high-performance worm drive with large transmission ratio, integrated in a sturdy cast housing for optimal cutting results - Vise with double clamping arm for low-burr cuts, also with side quick-change feature for mitre adjustment - Precision prism guide of the gearbox head, adjustable from the side - Extra-sturdy base frame with built-in automatic coolant system - Large chip drawer - Chip removal brush in the saw blade guard MPS Control System: - Storage of cut start / end positions Fpedpfx Aed Iin Heaqog - Display of power consumption, quantity, cutting time, etc. - Adjustable water cooling - Cutting pressure regulator NOTE: Price does not include saw blade! (Saw blade price: €204)

Kondisi: bekas, Tahun pembuatan: 1979, Swing diameter over bed: 480 mm Swing diameter over cross slide: 200 mm Turning length: 650 mm Max. workpiece diameter over bed cover: 200 mm Centre distance: 750 mm Spindle head: Size 6 Spindle bore: 58 mm Total power requirement: 18 kW Machine weight approx.: 2.7 t Space requirements approx.: 2.70 x 1.58 x 1.68 m CNC path control, 2 axes, SINUMERIK 5T with threading, tailstock quill taper Morse 4, maximum quill travel 200 mm, tailstock offset 550 mm Control cabinet 80x40x230 cm, weight: 150 kg Motor control cabinet with Siemens 810T, dimensions: W/D/H 80 x 90 x 100 cm, weight: 200 kg 4x plates + Spax screws + sheet metal screws drilling machine, drill bits Fodpodmbrxefx Aaqspg