Mesin gerinda silindris

SCHAUDT AR 750

Kondisi: bekas, Tahun pembuatan: 1977, Pressure: 250 t Stroke: 40 - 190 mm Strokes per minute: 40 /min Throat depth: 500 mm Clearance between side frames: 1,050 mm Shut height: 615 mm Table dimensions: 1,380 x 880 mm Pass-through opening in table: 450 mm Kjdpfovuuaiox Aa Nedg Table height above floor: 800 mm Ram area: 1,200 x 800 mm Ram adjustment: 125 mm Drive power: 22.0 kW Weight: 24.0 t Space requirement (L x W x H): approx. 2.0 x 2.5 x 3.95 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV) Equipped with: motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, clamping plate, two-hand operation

Kondisi: siap digunakan (bekas), Pressing force: 1600 kN, throat depth: 450 mm, installation height: 560 mm, ram stroke: 8–160 mm, control system: SCHMERSAL SEPG 05.3.2.0.22/95, weight: 16.2 t, including documentation. Kedpfshz Ua Sox Aa Njdg

Kondisi: baik (bekas), Tahun pembuatan: 1977, Fungsionalitas: berfungsi sepenuhnya, kedalaman tenggorokan: 440 mm, penyesuaian silinder hidrolik: 110 mm, tinggi total: 18.200 mm, lebar meja: 800 mm, panjang meja: 1.100 mm, lebar total: 24.000 mm, panjang total: 37.200 mm, berat keseluruhan: 12.600 kg, gaya penekanan: 200 t, tabel jarak ke piston: 400 mm, daya: 15 kW (20,39 hp), Plunger stroke: 40-180 mm incl. Helmerding feed, 400 mm x 4 mm Strokes: 40 + 60 strokes/min Kdodpfx Aaotu Hvwe Njg Distance table/ram – adjustment top/stroke bottom: 400 mm Table opening: 450 mm diameter

Kondisi: bekas, Tahun pembuatan: 2007, Pressing force 200 t Throat depth 510 mm Stroke 16 - 160 mm Ram adjustment 120 mm Table area 1500 x 1000 mm Table height above floor 900 mm Die opening in table 800 x 250 mm Ram area 1000 x 700 mm Ram pin hole 65 x 110 mm T-slot width 28 mm Adjustable stroke rate 30 - 120 min Hydraulic unit oil capacity 5 l Installation height (full stroke up, ram adj. up) 600 mm Installation height (stroke down, ram adj. up) 440 mm Total power requirement 32.2 kW Machine weight approx. 24 t Space requirement approx. WxDxH 2.85 x 3.1 x 3.65 m - hydraulic clutch - fixed table - hydraulic overload protection in ram - hydraulic connecting rod clamping - motorized ram height adjustment 120 mm with digital display for set ram height, rapid and inching mode - fully automatic stroke adjustment, range 16 - 160 mm - ram weight compensation - electronic TDC correction - planetary gearbox - oil circulation central lubrication - separate control panel with SIMATIC S7/300 screen control - pressing force measuring device - reversing circuit (return) - additional operating mode “setup – inching mode” - electric stroke counter - electric preset counter Kjdpjvbk Rwsfx Aa Njdg - electric connecting rod pin travel limiter - electronic cam controller - continuously variable drive (frequency controlled) - 2 sockets - clamping plate - main bearing / support bearing / connecting rod bearing temperature monitoring - operating hours counter - oil cooler - set of vibration elements Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross-section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of rollers: 2 Roller diameter: 100 mm Air gap: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Tahun pembuatan: 1987, Kondisi: bekas, Pressure: 150 t Throat depth: 350 mm Stroke: 20-120 mm Strokes per minute: 50 / 75 spm Ram adjustment: 85 mm Table surface: 1150 x 670 mm Ram surface: 800 x 380 mm Pass-through opening in table: 330 x 200 mm Table height: 800 mm Pin hole in ram: Ø 50 mm Machine weight approx.: 8 t Required space approx. (WxDxH): 2000 x 2000 x 2700 mm Hydraulic clutch-brake combination Centralized oil lubrication Kjdpep Apxhsfx Aa Njdg Mechanical overload protection in ram Semi-automatic stroke adjustment Manual ram adjustment Two-hand operation Foot operation Counter bearing

Kondisi: bekas, Tahun pembuatan: 1995, Pressing force: 250 t Throat depth: 450 mm Stroke: 8 - 135 mm Kdodpfx Aaevuk Hxo Neg Strokes per minute: 50 /min Distance table/ram, large stroke top, adjustment top: 635 mm Table surface: 1250 x 850 mm Pass-through opening in table: 355 mm Table height above floor: 950 mm Clear width between uprights: 660 mm Ram area: 790 x 610 mm Ram adjustment: 130 mm Drive power: 18.5 kW Weight: 14.0 t Space requirements (W x D x H): 1.5 x 2.8 x 3.65 m Approved for manual loading operations in accordance with CE standards Equipped with motor, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in the ram, manual stroke adjustment, manual ram adjustment, pneumatic ram weight compensation, fixed bolster table, motorized central lubrication, two-hand control The machine can be inspected in running condition at our warehouse.

Kondisi: bekas, Tahun pembuatan: 1972, nomor mesin/kendaraan: 1171, Total pressing force: 160 t Throat depth: 350 mm Ram stroke: 20 - 140 mm Ram adjustment: 75 mm Installation height (stroke bottom, adjustment top): 740 mm Table clamping area approx.: 1000 x 680 mm Ram clamping area approx.: 600 x 300 mm Strokes per minute: 50 min-1 Power requirement: 15 kW Machine weight approx.: 12 t Standard equipment Machine includes: - Safety fence HS Decoiler M 15 / 500 - Year of manufacture: 2009 Material width: 15 - 500 mm Coil weight: 1.5 t Coil outer diameter: 1400 mm Coil inner diameter: 380 - 530 mm HS Straightening machine RME 40 - 9 - Year of manufacture: 2009 Material thickness: 0.4 - 2 mm Number of feed rollers: 2 pieces Number of straightening rollers: 9 pieces Kdsdsuqdwxopfx Aa Nsg Straightening roller diameter: 61.9 mm Feed roller diameter: 61.9 mm Feed speed: 40 m / min Feed length: 0 - 9999.99 mm Additional equipment The machine was retrofitted with SIEMENS S7 in 2009.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, TECHNICAL SPECIFICATIONS: Press Model: T160 CNR6 Serial Number: 160/0/46/00 Year of Manufacture: 2000 Nominal force: 1,600 kN Weight: 13,800 kg Nominal strokes: 55 SPM Min./Max. strokes: 10/55 SPM Max. insertions: 17 SPM Clutch pressure min./max.: 4.0–5.5 bar Max. stopping time: 0.22 s Kjdpfxswaiw So Aa Njdg Safety distance: 355 mm Energy (at 15% nominal stroke): 14,500 kJ Min./Max. slide stroke: 10/200 mm Ram adjustment: 110 mm Highest TDC (Top Dead Center) adjustment: 430 mm Max. ejector stroke: 60 mm Table dimensions (H, D, W): 78/750/1250 mm Slide dimensions (D, W): 600/850 mm Shank diameter: 60 mm Shut height from bolster: 370 mm Max. tool size: 600/850 mm Max. die head weight: 344 daN Operating air pressure: 5.5–6 bar Arrest position: TDC Voltage: 380 V Frequency: 50 Hz Auxiliary voltage: 24 V NEWLY INSTALLED COMPONENTS: • Safety guards with interlock switches • Clutch plates • Clutch pins and bushes • Flywheel bearings • Flywheel oil seals • Adjustable stroke nose • Counterbalance cylinder seal kit • Air pressure gauges • Electrical control panel • Inverter (variable speed drive) • Motor • Motor pulley • Table resurfaced on CNC machine Supplied with a six (6) month warranty, technical documentation, and CE conformity Electrical control panel warranty: twelve (12) months.

Tahun pembuatan: 1979, Kondisi: bekas, Pressure: 75 t Throat depth: 260 mm Stroke: 16-80 mm Table size: 800 x 520 mm Distance table/ram: 350 mm Stroke rate - infinitely variable: 50 - 250 strokes/min Ram surface: 400 x 300 mm Ram adjustment: 70 mm Total power requirement: 7.5 kW Space requirement approx.: 2.7 x 1.7 x 2.6 m Machine weight approx.: 4 t Pass-through opening in table: 260 x 180 mm - Pneumatic Ortlinghaus air clutch with additional brake - Infinitely variable speed control via Stöhrer drive - Break plate - Two-hand operation Kodjfn Ap Dopfx Aa Nsdg - Additional clamping plate - Air reservoir for clutch - Oil recirculation lubrication

Kondisi: sangat baik (bekas), Description to follow! Kdjdjx Hartspfx Aa Njg