Sistem pemberian dosis piston Sistem pemberian dosis piston

Scheugenpflug DOS P016

Scheugenpflug DOS P016 Piston Dispenser
Piston Dosing System DOS P
For a Wide Range of Requirements

The piston dosing systems from Scheugenpflug operate on the principle of volumetric dosing; the dispensed material quantity is mechanically determined by the geometry and stroke of the corresponding cylinders. Filling the cylinder with potting material is achieved by supply from an appropriate material feed system. When a two-component medium is used, the volumes of both cylinders simultaneously set the mixing ratio of resin to hardener. The dosing pistons push the two components simultaneously through separate channels toward the outlet valve, where they only mix in the static mixing tube to form a homogeneous reactive medium.

The DOS P016 / 050 / 100 / 300 / TCA piston dosing systems are highly precise volumetric dispensers designed to process 1C and 2C materials, covering a broad range of requirements. Precisely dimensioned dosing cylinders ensure the delivery of reproducible material volumes.

For 2C materials, parallel emptying of both cylinders into the shared mixing tube guarantees a consistently constant mixing ratio for maximum process reliability. In addition, even pressure, moisture, or shear-sensitive potting materials can be gently processed without material deterioration. Users also benefit from simple and quick maintenance, long service intervals, and significantly reduced maintenance costs. Optional features—such as valve monitoring, mixing tube heating, or metering head heating—allow flexible adaptation to various tasks.

Your Advantages
- Metering precision is independent of temperature, pressure, or viscosity
- Constant mixing ratio at all times due to parallel cylinder discharge
- Wide range of uses (for various materials and applications)

Key Features
- Simultaneous discharge of cylinders via common stroke mechanism ensures homogeneous mix ratio
- Sensor monitoring of inlet and outlet valves as well as cylinder filling
- Material temperature control through mixing tube heating (optional)
- Dispensing needle monitoring with camera (optional)

Product Data
General
Materials: 1C and 2C
Viscosity: From low to high viscosity
Fillers: Filled and/or abrasive media
Operating Principle: Volumetric dosing

Characteristics
- Constant mixing ratio for 2C applications
- Independent of temperature, material feed pressure, and potting resin viscosity
- Precisely reproducible, highly accurate results
- Maximum process reliability

Typical Applications
Potting, sealing, bonding, application of thermal interface materials, sealing, encapsulation (glob top)

DOS P016
Max. volume/stroke 2C at 1:1 ratio
1C: 0.06/17 ml
2C: 0.1/32 ml
Max. dosing speed [ml/s]: 2
Dosing accuracy at max. stroke [%]: < 0.5
Heatable up to max. [°C]: 80
Dsdpfxsrazznj Aayjku

Outlets:
1C: 1–4, 6, 8
2C: 1–4
Weight: 14 kg

Dimensions (W x H x D)
290 x 350 x 230 mm

Find more dispensers—new and used—in our shop!
International shipping costs on request!

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.