VacuMaster RE 100-4 dengan lintasan derek

Schmalz Schmalz VacuMaster RE 100-4

Kondisi: baru, BARBARIC B3 Vacuum Lifter, Pivotable, incl. Crane - Exhibition Unit - Includes: - BARBARIC uniWood UWL 3 Vacuum Lifter, 150 kg capacity Vertical and horizontal transport of flat, standard commercial panels (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - 90° tilting range with pneumatic tilting mechanism - Complete configuration with hoist and corresponding safety features (vacuum gauge and hand slide valve with mechanical lock) - uniWood traverse with 2 suction cups Ø 270 mm on an adjustable beam (Beam length: 1,500 mm) Includes: - Reinforced version option BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction cups 500 x 250 mm on an adjustable beam (Beam length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version enables lifting materials up to 250 kg. Includes: - Comfort operation option BARBARIC uniWood All controls for the hoisting gear and vacuum lifter are integrated into a single control unit – our special handling grip. This allows single-handed operating of the system and guiding of the load. The lifting process can be infinitely controlled by frequency inverter. In the comfort configuration, complete with hoist and corresponding safety systems (vacuum gauge and 2-button safety operation for load release). Nodeu R Szaopfx Abuowb Includes: - BARBARIC Column-Mounted Pivot Crane Load capacity at lifting device: 250 kg The stated capacity refers to the working load at the lifting device. Barbaric pivot cranes are designed for handling tasks in all application areas and are extremely lightweight. The kit consists of column, console, and low-friction jib. Pivoting and trolley traverse are done manually. Prerequisite for installation is a suitably rated concrete floor (C20/R5, at least 20 cm thick). Structural verification of the floor is the responsibility of the customer and must be documented accordingly. For installation on cracked concrete or weak subsoil, we can provide larger base plates on request. Fixing: Supplied with adhesive anchor for concrete floor. If ordered without lifting device, please specify cable or hose feed requirements! Delivery includes: trolley, energy supply system, and compressed air connection. - New exhibition machine -

Kondisi: bekas, • Load capacity: 350 kg Nodpfxsxnvq Ej Abuewb • 6 adjustable suction cups, 250 mm diameter • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Available for immediate delivery IV: + Design standards 1. The design of the unit strictly complies with the European CE standard EN13155:2016, the American ASME B30.20-2006 standard, and the German UVV18 standard, with key structural performance data exceeding those of the above standards. 2. Safety factor: The main structure is rated at 4.0, the safe vacuum level is 65%, and the standard is 85%, which is 20% above the safety norm. V+ Equipment Testing and Standards 1. General a) Checks for completeness of materials, painted or scratched surfaces, suction cup damage, or pipe damage. 2. Points checked before leaving the factory: © Equipment suction test © Pressure hold test © Alarm test © Various control components • Price on request

Tahun pembuatan: 2024, Kondisi: baru, returnsystem Nwsdpfx Asw Nadmobusb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Brandt KDF 110 Optimat Ambition – only 1,150 operating hours Manufacturer: Brandt Model: KDF 110 Year of Manufacture: 2012 Machine No.: 0-261-20-6960 Control: Easy Control 10+ Contactless track control, feed-rate regulated, with start-stop optic-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: - Chain Feed Track: Standard equipment with central lubrication for transport chain - Upper Pressure Rollers/Product Guide: Central control, 2 roller tracks - Jointing Unit: 2 x 0.75 kW, 200 Hz; includes DIA jointing cutter set, manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness - Gluing Unit: A3 gluing unit for hotmelt glue, with option for PU application, magazine, pressure zone with electro-pneumatic 2-point positioning via central control - Pressure Zone: 1 powered roller and 2 idle rollers for optimal and consistent compaction - End Trimming Unit: 0.18 kW, 12,000 rpm - Milling Unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counter-rotating, 3-position adjustment for chamfer/radius (R2), overlap, and straight; max. 3 mm edge thickness with Siko counter - Profile Scraper: Max. 3 mm edge thickness - Surface Scraper: Reversible knives Chain width: 80 mm Edgebanding material (roll): 0.4 – 3 mm End trimming device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Nwodjxvirfepfx Abujb Min. workpiece width: 70 mm for 8-22 mm thickness; 120 mm for 23-40 mm thickness (depending on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed speed: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Total length: 3,672 mm Location: ex stock 54634 Bitburg - immediately available -

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2459, Mesin dalam kondisi sangat baik - panel kontrol sangat mudah dibaca - lebar benda kerja minimum sekitar 80 mm - panjang benda kerja minimum sekitar 200 mm - kecepatan pengumpanan sekitar 10 m/menit - rantai pengangkut dengan pelat rantai khusus yang terpasang permanen - penekan atas dengan dua rol - panjang mesin 4300 mm - lebar mesin 1400 mm - berat sekitar 1250 kg - meja penyangga benda kerja depan dapat ditarik keluar - pelumas sentral otomatis untuk gergaji potong & mesin frais sudut - tangki lem leleh dilapisi teflon (sangat rendah perawatan) - siap operasi dalam waktu sekitar 5 - 6 menit - unit penambahan tepi - pemotongan dengan rol pneumatik Nwjdpfx Abjx Ahmuouob - aplikasi lem langsung pada benda kerja - unit pemotong untuk tepi depan & belakang - unit frais rata / chamfer / radius - pembulatan sudut - pisau penarik permukaan dengan dual tracking

Kondisi: baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, enkelzijdige-kantenaanlijmmachine-technische-gegevens Nwedpfjxpgxvjx Abuob

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 50 mm, ketebalan tepi (maks.): 3 mm, tinggi kerja: 900 mm, kebutuhan tinggi: 1.400 mm, persyaratan ruang panjang: 4.050 mm, lebar yang dibutuhkan: 1.300 mm, tekanan kerja: 7 batang, with PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm: jointing cutter (including DIA tool), up to 2 mm milling depth (max. 1 mm with special materials such as multiplex); maintenance-free glue pot with quick-change facility including glue discharge device; HF cross-cut saw station (approx. 12,000 rpm); HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter head (combination version); corner rounding unit; surface scraper (including pneumatic lift); robust chain feed; ball bearing mounted double roller top pressure; inspection window on the rear side of the machine; extendable workpiece support; feed speed approx. 10 m/min. Complete with quick-change facility for corner rounding unit, radius scraper (including pneumatic lift), undercarriage. F 4 – Technical Specifications Nsdpfx Abox E N Nfjuowb Max. edge thickness: 3 mm Min. / Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: 7 m/min. Ready for operation: approx. 3.5 min. Max. total connected load: ∅ approx. 7.4 kW Electrical connection: 400 V / 3 Ph / 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Dust extraction port: ∅ 1 x 140 mm

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2014, Instalasi crane dengan troli crane elektrik, chain hoist, dan perangkat vakum – lengkap. Nodpfx Aboxp Nycsuowb Rel crane GISKB II, panjang 9 meter Jembatan crane HEA120, panjang 4400 mm Troli crane elektrik GIS Chain hoist GIS GP500/1, 0,5 t, tinggi kait sekitar 5 m Perangkat vakum DEVO-Tech, D-TB-300.03, kapasitas angkut 300 kg Dibongkar

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Vacuum-Schlauchheber JumboErgo 85 dengan jalur crane untuk suspensi langit-langit. Pengangkat vakum dan blower sedikit digunakan dan dalam kondisi sangat baik, lihat foto. DGUV kadaluwarsa. Jalur crane sekitar 16 x 6 m dengan 10 penyangga vertikal ke langit-langit dan 2 penyangga di kedua sisi ujung, lihat foto. Tinggi jalur crane bersih sekitar 3 m, tinggi plafon sekitar 3,5 m, sistem dapat diatur ketinggiannya. Pembongkaran dan pengambilan di 41334 Nettetal Nwsdpfxjx E Drbj Abujb