Panduan rol silang

Schneeberger 9700

Kondisi: bekas, techdata-2024-06-14 Hedpfx Aasuhbywe Nsfb

Kondisi: bekas, Tahun pembuatan: 1998, Grinding length 800 mm Grinding width 500 mm Workpiece height 425 mm Total power requirement 15 kW Machine weight approx. 4.5 t G E I B E L & H O T Z CNC Cycle-Controlled Precision Surface Grinding Machine Model FS 850 GT SL Year 1998 # 101258 Max. grinding length (table longitudinal travel 900 mm) 800 mm Max. grinding width (cross travel 500 mm) 500 mm Max. grinding height under wheel approx. 425 mm Standard magnetic chuck size 800 x 500 mm Max. table load 1,100 kg Table speed 2 – 28 m/min Cross feed intermittent 3 – 60 mm/stroke Rapid traverse cross & vertical 4,000 mm/min Grinding wheel dimensions 400 x 100 x 127 mm Grinding spindle drive approx. 9 kW Total drive approx. 22 kW - 400 V – 50 Hz Weight approx. 4,500 kg Accessories / Special Equipment • Machine features an easy-to-program GEIBEL&HOTZ grinding cycle control Hfjdpfxet Hxame Aa Njb • SL type with standard grinding cycles such as surface and multi-surface grinding, including • Roughing – Finishing – Spark-out – Return, plunge grinding, automatic dressing cycle with • Compensation, stop at loading station, all entries/parameters via the operator touch screen • and function keys. Electronic handwheel for 3 axes. The controller is based on SIEMENS • electronic components, including SIEMENS OP 25. • Table movement via rotary thread drive, allowing both very high and very low table speeds with constant torque and very high efficiency. • Cross and vertical movements driven by ball screw. • Diamond dresser, left side of the table next to the magnetic plate with automatic dressing cycle, compensation, pullback, and possibility for edge rounding on grinding wheels • MPM balancing device for the grinding wheel • Built-in permanent electromagnetic chuck approx. 800 x 500 mm, fine-pole • Wet grinding system with stand-alone band filter coolant filtration • Complete enclosure with electrically monitored sliding doors • Stand-alone electrical cabinet, work light, various accessories, operating manuals Condition: Good to very good! Suitable for large-area material removal due to the wide grinding wheel! Please click here soon for a video of the machine: Delivery: Ex stock, immediately available, FCA Metzingen Payment: Net – upon receipt of invoice

Tahun pembuatan: 2000, Kondisi: baik (bekas), CNC flat and profile grinding machine Manufacturer: Ziersch & Baltrusch Model: PROFITLINE ZB 62 NC Hfsdpfxofrbcke Aa Njb Year of manufacture: 2000 Grinding area: 600 x 270 mm Electromagnetic chuck with continuous transverse pole division 600 x 200 mm, pole pitch = 4 mm Wet grinding system with automatic paper band filter, machine tray. Complete machine documentation available.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, panjang penggilingan: 620 mm, lebar di tengah: 680 mm, diameter roda gerinda: 350 mm, lebar total: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete disassembly of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the entire machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand-scraping of the X-axis guideway - Hand-scraping of the Z-axis guideway Hfodpferz Nflex Aa Njb - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measuring protocol for TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be repainted, the rest of the machine retains its original paintwork Electronics: The complete electronics of the machine will be checked and tested, and defective switches and cables will be replaced

Tahun pembuatan: 1985, Kondisi: diremaj di bengkel (bekas), REFORM Type AR 10 Model 40H Face Grinding Machine Year of manufacture: 1985 30 kW grinding motor Modicon control system 6-stage magnetic control Magnet size: 1000 mm x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pcs Hfsdpfxjd E Np Ej Aa Neb Grinding motor infeed: infinitely adjustable from 0.01 mm to 0.1 mm Hydraulic oscillation drive New supply cables between machine and control cabinet

Kondisi: baru, Tahun pembuatan: 2025, Cutting speed: 35 m/s Grinding height: 210 mm Workpiece length / mm Machine weight: approx. 210-260 kg Space requirement: approx. 1100 x 760 x 860 mm The G115 surface grinder is a compact grinding machine designed for machining the periphery or face of the grinding wheel on horizontal or vertical surfaces of a workpiece. With appropriate fixtures or shaped grinding wheels, inclined or contoured surfaces can also be machined. This machine is ideally suited for small businesses, maintenance workshops, DIY workshops, laboratories, teaching demonstrations, etc. TECHNICAL DATA Maximum stock removal: not greater than 0.03 mm Maximum grinding wheel linear speed: 35 m/s Table dimensions: 152×304 mm Maximum grinding height: 210 mm Longitudinal table travel: 340 mm Cross table travel: 170 mm T-slot (table): 1-12 mm Grinding wheel outer diameter × bore × thickness: 180×32×13 mm Spindle motor: 550 W/220 V Vertical handwheel feed interval: 0.025 mm Lateral handwheel feed interval: 0.02 mm Net weight / Gross weight: 210/260 kg Machine dimensions: 930×780×730 mm Packing dimensions: 1100×760×860 mm The worktable can be moved forwards and backwards as well as left and right. The grinding head can be raised and lowered vertically. High rigidity of the entire machine. Grinding head runs smoothly. Compact design and low noise operation. Hfodpfxsvuuvkj Aa Njb A working enclosure is available separately. The machine is lubricated with a manual oil pump. To lubricate, simply pull out the handle. If you require special accessories to increase work efficiency, please contact customer service. (Special accessories must be purchased separately.) PRODUCT INFORMATION: At the proximal end of the main spindle, the radial run-out of the taper bore axis is 0.01~0.02 mm at a distance of 100 mm.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding Wheel Head Disassembly, cleaning, replacement of worn and defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. Newly painted. Workpiece Headstock Disassembly, cleaning, replacement of worn and defective parts, motor overhaul, replacement of belts. New spindle bearings. Newly painted. Tailstock Disassembled, inspected, and overhauled. Hydraulics Disassembly, motor inspection, replacement of hoses, defective and worn parts replaced. Hydraulic block inspected. X-Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., hydraulic piston overhaul, tables ground. Z-Axis Disassembly, tables ground, replacement of worn and defective parts, hydraulic piston overhaul, newly painted. Electrical Cabinet Comprehensive inspection, various relays replaced. Painting Colors: White RAL 9003 and Grey RAL 7011 Geometry in accordance with manufacturer’s protocol. Inspection and cleaning of various accessories Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal centres distance: 600 mm Maximum centres distance (with extended headstock): 750 mm Centre height, standard: 125 mm Centre height with interchangeable headstock/follow rest shoes: 175 – 250 mm Maximum workpiece diameter (at 125 mm centre height): 250 mm Maximum workpiece diameter with interchangeable shoes: 350 – 500 mm Table swivel range, each direction: 10° Maximum surface grinding length (max. width = 200 mm): 900 mm Table speed, stepless hydraulic adjustment: 0 – 6 m/min approx. Table reversal delay: 0 – 5 sec Grinding wheel for external grinding, diameter-width-bore: 400 x 50 x 127 mm Grinding wheel for surface grinding: 250 x 13 x 76 mm Grinding spindle speed: 1500/1700/2200/3600 rpm Grinding wheel head swivel range: 270° With index positions every: 90° Vertical movement of grinding wheel head, centre height: 125–350 mm Hedpow U Ry Nefx Aa Nsfb Transversal travel of grinding wheel head: 285 mm Hydraulic rapid feed and retract travel: 40 mm Intermittent infeed of grinding wheel by table reversal: 0.001–0.03 mm/dia Continuous plunge grinding infeed: 0–0.9 mm/dia Micrometer stop for infeed, per increment: 0.001 mm/dia Workhead swivel range: 360° Workhead spindle speed, stepless variable, normal/special speed: 20–400 / 10–400 rpm Workhead / tailstock internal taper: Morse 5 / 3 Grinding wheel head motor, approx.: 4 HP All technical details provided without responsibility for errors or omissions.

Tahun pembuatan: 1981, Kondisi: bekas, Manufacturer: Deckel Hfsdjihp U Dspfx Aa Njb Model: FP 4 Table: Dimensions: 1000 x 470 mm Longitudinal Travel X-axis: 700 mm Cross Travel Y-axis: 400 mm Vertical Travel Z-axis: 450 mm Spindle Overhang: 50–450 mm Spindle Taper: ISO 40 Number of Spindle Speeds: 18 steps Spindle Speed Range: 31.5–1600 rpm Number of Horizontal Spindle Speeds: 18 steps Horizontal Spindle Speed Range: 31.5–1600 rpm Machine Weight: 2000 kg Feeds X, Y, Z axis: 18 steps, 10–500 mm/min Accessories: Milling head with quill Table: 1000 x 470 mm

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 1500 mm Center height: 175 mm Grinding wheel diameter: 500 mm Overhauled according to Kellenberger guidelines, including new, modern, and future-proof control system. New servo motors in X-axis and for the workpiece headstock. Photo shows a machine already delivered in UR configuration. -The touch-panel operation is extremely user-friendly. -The symbols on the control panel are practically identical to the original control system, eliminating the need for retraining. -Diagnostic function with display of PLC messages and digital I/Os. -Dressing function can be expanded or modified according to customer specifications. -Workpiece spindle oriented stop available upon request. -New maximum infeed amount of 40 mm, can be further increased upon request. Hfjdpfxouwv Ids Aa Nob -Digital readout in 2 axes. X-axis resolution: 0.5 μm. Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New stable internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment -Increase of center height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine is equipped with an electronically controlled infeed system in the X-axis, driven by stepper motor. Hydraulic longitudinal and rapid traverse movement of the table. Versatile application in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Available options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measuring control The machine tool currently does not comply with the basic safety and protection requirements as stipulated in the BetrSichV 2015. An assessment of the required minimum protection objectives must be determined via a risk assessment according to BetrSichV.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en-UK Hfedsd Erdrspfx Aa Neb