Alat penggiling, rautan

Schneeberger ARIES

Kondisi: baik (bekas), Tahun pembuatan: 1992, JAESPA bandsawing machine, model W400 AZ Hnjdpfxogf H Sas Aa Nog Control: Minipos 807, Year of manufacture: 1992 Maximum cutting diameter (round material): 400 mm Blade dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total connected load: 4 kW Approx. weight: 2500 kg Accessories: 2x saw blades, 6 m roller conveyor with motorized drive, machine documentation available. Space requirements: 2.8 x 2.8 x 2 m

Tahun pembuatan: 2024, Kondisi: bekas, Grinding wheel mount: HSK 50 E Diamond grinding wheel diameter: 50 - 250 mm Max. grinding wheel width: 70 mm Grinding wheel bore diameter: 20 mm Speed of diamond/CBN wheel spindle: steplessly adjustable 100 - 1000 rpm Grinding wheel radius: 0-30 mm Dressing wheel dimensions: 180 x 25 x 31.75 mm Dressing wheel rotational speed: 200 - 2000 rpm Oscillation stroke of dressing wheel: 0-70 mm Dressing wheel motor power: 2.2 kW Weight approx.: 1400 kg Dimensions (L x W x H): 1850 x 2300 x 2100 mm Description: Suitable for truing and profiling diamond and CBN grinding wheels. Accessories: Full enclosure Grinding wheel motor, heavy-duty version with 4 kW Dressing wheel motor, heavy-duty version with 2.2 kW 2 machine lamps 12 V Glass linear scale on X and Z axes 2/3" camera system with 17" LCD monitor (microscope with 15-120x zoom) High-performance angle measuring device (0.05°) Diamond/CBN wheel spindle steplessly adjustable 100 - 1000 rpm Dressing wheel speed steplessly adjustable 200 - 2000 rpm Stepless oscillation stroke speed Hnedpelfil Ssfx Aa Nsg Automatic central lubrication SIC manual dressing wheel.

Kondisi: baru, Tahun pembuatan: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, Saw tiltable via handwheel and worm gear (rear) Saw blade diameter: 520 mm, blade bore: 50 mm Blade speed: 2800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Saw can be swiveled on one side up to approx. 25° for acute angles and tilted to the left up to 30° TCT circular saw blade 520x4.0/2.8 x 50 mm, 60 ATB teeth, negative hook angle, for wood RLH-ST60 measuring length 6.0 m, mounting side: left Length stop / roller conveyor, heavy-duty version, Stop carriage adjustable from operator position via handwheel, electronic-digital measuring display, stop carriage pneumatically clamped, stop flap folds away to the rear, with steel rollers, 60 mm diameter, roller pitch 200 mm, 400 mm roller width, with 4 support legs and connector, total length: 6.7 m Surcharge for digital electronic display unit Type: FIAMA EP6 for 230-volt mains operation, with electric ON/OFF switch and socket. Powerful dark red LED display. Higher precision than the battery-powered crystal display RO-ST60 4.0 m long infeed roller conveyor Mounting side: right Heavy-duty version, steel rollers: 60 mm Hsdpfok H Ic Uex Aa Nsng diameter, roller pitch: 200 mm 400 mm roller width, 3 support legs and connector Location: Ex stock 54634 Bitburg - Immediately available - Image: similar. Machine still in original packaging

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, jam operasional: 59 h, Fungsionalitas: berfungsi sepenuhnya, panjang penggilingan: 400 mm, lebar penggilingan: 200 mm, panjang pemakanan sumbu X: 510 mm, panjang umpan sumbu Z: 220 mm, kecepatan pemakanan sumbu X: 20 m/menit, diameter roda gerinda: 205 mm, jarak meja ke pusat spindel: 357 mm, beban meja: 120 kg, jenis arus masuk: tiga fasa, lebar roda gerinda: 16 mm, kecepatan spindel (maks.): 3.600 rpm, kecepatan spindel (min.): 1.000 rpm, berat keseluruhan: 2.100 kg, daya motor spindle penggiling: 2.200 W, kecepatan roda gerinda: 3.600 rpm, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, de Hnedpfx Aajw Hf Hio Nog

Kondisi: baik (bekas), Tahun pembuatan: 2007, 1 Hedpfx Aaou A Dn Ne Nsng

Kondisi: bekas, Tahun pembuatan: 2017, Neue Spindel 2025-08 Jährlicher Service durch Mazak Servicecenter. Inklusive Stangenlader Super 80 Max. Umlaufdurchmesser Ø 658 mm Umlaufdurchmesser über Kreuzsupport Ø 658 mm Umlaufdurchmesser bei aktiver Y-Achse Ø 658 mm Max. Drehdurchmesser Ø 658 mm Max. Drehdurchmesser ab Stange Ø 51 mm (Option Ø 65) Max. Werkstücklänge 1011 mm X-Achse: 615 mm Y-Achse: +/-130 mm Z-Achse: 1077 mm B-Achse: 0,0001° / 240° Spindel 1 Spindelaufnahme JIS A2-6 Spindelbohrung 76 mm Durchgangsbohrung 51 mm (Option Ø 65) Spindelmotor AC 22 kW 40% ED Drehzahlbereich 35-5000 U/min Anzahl der Drehzahlbereiche Direktantrieb Max. Drehmoment 467 Nm 25% ED Max. Werkstückgewicht inkl. Spannfutter 300 kg Spindelmitte über Boden 1235 mm Spindel 2 Spindelaufnahme JIS A2-6 Spindelbohrung 76 mm Durchgangsbohrung Nicht applizierbar (Option Ø 65) Spindelmotor AC 18,5 kW 40% ED Drehzahlbereich 33-5000 U/min Anzahl der Drehzahlbereiche Direktantrieb Max. Drehmoment 325 Nm 40% ED Max. Werkstückgewicht inkl. Spannfutter 300 kg Spindelmitte über Boden 1235 mm C-Achse 1 Typ Direktantrieb Eilgang 555 U/min Arbeitsvorschub 1-5000 Grad/min Min. programmierbare Schrittweite 0,0001 Grad C-Achse 2 Typ Direktantrieb Eilgang 555 U/min Arbeitsvorschub 1-5000 Grad/min Min. programmierbare Schrittweite 0,0001 Grad W-Achse Verfahrweg 1066 Eilgang 30 m/min B-Achse B-Ausschlag 240 Grad Max. Bearbeitungsvorschub (ISO) 40 U/min Min. programmierbare Schrittweite 0,0001 Grad Hsdpox Hfl Eefx Aa Nsng Werkzeughaltertyp: Werkzeugwechsler Werkzeugschafthalter: 25 x 25 mm Werkzeugwechselzeit, Werkzeug zu Werkzeug: 1,3 Sekunden Span-zu-Span-Zeit, durchschnittlich: 8 Sekunden Werkzeugaufnahme für angetriebene Werkzeuge: Capto C6 Werkzeugaufnahme für Drehwerkzeuge: Capto C6 Max. Werkzeuggewicht: 12 kg Max. Werkzeuglänge: 400 mm Spannkraft für Werkzeug (Capto C6): 33 kN Werkzeugmagazin: Anzahl der Werkzeugplätze: 36 Stück Max. Werkzeugdurchmesser: 90 mm Max. Werkzeugdurchmesser bei leerem Platz davor und danach: 125 mm Max. Werkzeuglänge: 400 mm Max. Werkzeuggewicht: 12 kg Max. Werkzeugdrehmoment: 9,8 Nm Sonstiges: Länge: 3990/4910 mm Breite: 2800 mm Höhe: 2720 mm Gewicht: 13100/16600 kg Leistungsbedarf, kontinuierlich: 72,34 kVA Druckluftbedarf, min.: 5 kg/cm², 410 Liter/min Werkzeugmagazin: 36 Werkzeuge Standardausstattung: B-Achse Capto C6 ATC Auto Recovery Automatische Ein/Aus-Schaltung, Heizplan 19“-LCD-Touchscreen Mazak-Werkzeugidentifikationssystem inkl. 10 ID-Chips (für Capto C6) Messarm zur Werkzeuglängeneinstellung, automatische Kompensation und Bruchüberwachung 8“ Spannfutter Typ: Kitagawa B208A6 8“ Spannfutter Typ: Kitagawa B208A6 Kühlmitteltank Kühldruck für oberen Revolver: max. 5 bar, 23 l/min Satz Anleitungen (digital) Smooth Standard Software: Mazacc 2D Software (shape comp) Mazacc 2D Software für rotierende Achsen (shape comp) Mazacc 3D High Speed Software High Smoothing Control Seamless Corner Control Variable Acceleration Control Ultra High Speed Machining Mode Rapid Overlap ISO/EIA-Programmierung: Dreh- und Frässpindelstart asynchron Synchronisiertes Gewindeschneiden mit angetriebenen Werkzeugen Makro-Unterbrechung ermöglicht ereignisgesteuerte ISO/EIA-Programme Makroprogrammierung mit 600 zusätzlichen Variablenpaaren für ISO/EIA Helixinterpolation für ISO/EIA Koordinatenrotation mit G68 für ISO/EIA Polarkoordinaten, G122 für ISO/EIA Synchronisierte Interpolation X-C-Achse G12.1 für ISO/EIA Koordinatensysteme G54

Kondisi: sangat baik (bekas), HM saw grinding machine VOLLMER model Unimat S with enclosure Hnodpfxeu Sztxe Aa Neg

Tahun pembuatan: 2011, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Finger jointing line for cross-sections up to 200 cm² (80/240 mm or 100/200 mm), including the following components: 1. HOWIAL Tilt Destacking System - SH/4t - 1.75x1.75x6.00m - 4t – shortest length 2.50 m, semi-automatic package separation. For tilting the timber stack up to 45°. Electro-motor drive. Max. stack dimensions 1.75 x 1.75 x 6.00 m. Max. stack weight 4 t. Shortest timber length 2.5 m. 2. HOWIAL Lamella Separator VE 1 to crosscut saw. With pneumatically controlled tongues, on which material marked for defects is placed onto the underlying roller conveyor. 3. HOWIAL Grading Roller Conveyor RO-1 Digital wood moisture measuring, control and recording system for automatic acquisition and control of wood moisture using the impulse measuring method based on the electrical resistance principle. 4. Gann DMT-8 Digital wood moisture measuring, control, and recording system for automatic acquisition and control of wood moisture by impulse measuring based on the electric resistance principle. System installed in a large control cabinet, complete with inkjet printer. 5. HOWIAL Crosscut Saw AS-30 B Pneumatically controlled under-table crosscut saw with 2 automatic feed units, automatic crosscutting. Special photo cell control for detection of fluorescent line marking. Automatic waste detection possible. Saw motor power 7.5 kW Saw blade diameter 700 mm Feed drive approx. 2 x 1.5 kW Hnjdpfxji Ezx Dj Aa Neg Air pressure 8 bar Max. feed speed approx. 60 m/min 6. HOWIAL Belt Conveyor for cutoff waste, with profiled belt and guide plates Belt width 350 mm Belt length 2000 mm Belt speed 0.4 m/s 7. HOWIAL Double Roller Conveyor RO-2, 6.00 m long Incl. transverse transport, conveyance to finger jointing system. Powered by round belt, all rollers driven. Cross-transfer chain conveyor. Eject ± moisture right, transport speed adjustable up to 100 m/min. Length approx. 6.00 m Roller width approx. 400 mm Diameter 112 mm 8. Compact Finger Jointing Machine Cook Bolinder The technical data are original from Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Input lengths from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Pressing force 5 - 22 tons Spindle diameter 50 mm Finger joint profile 15/15 Spindle speed approx. 6000 rpm Total electrical connected load approx. 62 kW Machine weight approx. 9 tons Gluing: OEST comb system for PU Modern Telemechanique PLC control. 9. HOWIAL Roller Conveyor with Destacking Powered roller conveyor with automatic ejector and hydraulically driven destacking arms. Technical Data: Height: 920 mm Length: approx. 12,000 mm 10. Safety fence panels including safety switches 11. Finger Joint Testing Machine BSPLT-100 Testing machine for finger joint bend test according to DIN 1052-1/A1 and EN 385. Bearing distances freely adjustable, mounted measurement scale, automatic calculation of support distances in the software. Fully automatic test sequence by mouse click via PC (PC not included). Alternatively, the test process can be operated via front panel keys. Connection to any standard PC or laptop (Win 2000/XP) via supplied RS232 serial cable. Fully automatic data acquisition and protocol generation in MS Excel with graphical representation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. pressing force: < 100 kN Max. support length: 2100 mm Measuring accuracy WITHOUT DISMANTLING

Kondisi: baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 551739, panjang pemakanan sumbu X: 384 mm, panjang umpan sumbu Y: 317 mm, panjang umpan sumbu Z: 217 mm, diameter roda gerinda: 203 mm, kecepatan rotasi (maks.): 10.000 rpm, Tool grinder with grinding wheel changer and Fanuc FastLoad automation Loading System: FastLoad Special feature: Fully integrated within the machine enclosure Application: Automation solution for low-volume production Access: Operator access from the front of the machine Gripper set: One set suitable for the entire diameter range Footprint: Does not increase the machine’s installation space TECHNICAL DETAILS Hnjdpfx Aajv Ednqs Nog Grinding spindle peak power: 9.5 kW Direct-drive grinding spindle: yes Spindle speed: 10,000 rpm Number of CNC-controlled axes: 5 Grinding wheel diameter: 203.5 mm Wheel changer: 2 stations Axes X-axis: 384 mm Y-axis: 317 mm Z-axis: 217 mm C-axis: 230° A-axis: 360° A-axis rotation: 600 rpm Tool Handling Suitable tool diameter: Ø2 – 20 mm Tool length range: 30 – 150 mm Loading time: 20 seconds Number of tools Ø2 mm: 153 Number of tools Ø12 mm: 36 Measuring and Tool Inspection Measuring probe mounted on grinding head: yes Tool profile measurement: directly on the machine, no need to remove the tool MACHINE DETAILS Base made of polymer concrete: yes Installation dimensions: 1,930 x 2,190 x 2,015 mm Weight: 4,500 kg Connected load: 14.5 kVA EQUIPMENT - Measuring probe on the grinding head - Direct tool profile measuring capability - Machine base made of polymer concrete

Kondisi: bekas, Tahun pembuatan: 1969, Translation of technical listing for export platforms: Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: -- mm Workpiece height: 60 mm Total power requirement: 50 kW Machine weight approx.: 7,000 kg Required space approx.: -- m D I S K U S Vertical double-sided surface grinding machine in C-frame design with rotary workpiece feed system Model: DDS 600 CRA Year of manufacture: 1969 Serial No.: 6672 _____ Grinding wheel diameter x bore (each): 600 x 150 mm Grinding wheel width approx.: 60 mm Workpiece transport disc, outer Ø: 810 mm Hjdpfjt Hw N Hox Aa Neng Workpiece: Max. grinding height x width: approx. 60 x 120 mm Vertical quill adjustment (each): approx. 150 mm Hydraulic infeed impulses for depth feed: 0.0025 - 0.05 mm Outer diameter of transport disc: approx. 810 mm Feed rate for rotary device, steplessly adjustable: 14 – 145 mm/s Grinding wheel speed (each): (24 m/s) / 765 rpm Grinding spindle drive (each): 22 kW Total drive: approx. 50 kW / 380 V / 50 Hz Total weight: approx. 7,000 kg Accessories / Special Features • Rotary workpiece fixture for round transport discs with equipment slots for part placement and automatic ejection of finished parts onto a chute into a transport box. • IONIC measuring control no. 9 So with measuring probe for finished workpiece height, including (if needed) automatic hydraulic grinding wheel advance • Stepless speed regulation of rotary feed device dependent on grinding requirement and workpiece dimensions • Manual infeed of grinding wheels via push buttons • Hydraulically swiveling dressing device (RA) between the two wheels for simultaneous dressing of both grinding wheels, with appropriate compensation and automatic repositioning to effective workpiece thickness after dressing = significant time savings; can be activated manually or via timer • Ammeters for both grinding spindle drives • Central lubrication • Mechanical workpiece height control with machine shut-off in case of overheight • Free-standing control cabinet, separate hydraulic unit, large separate belt filter system, various grinding wheels, several transport wheels, etc. This machine is particularly suited to simultaneous, parallel-surface grinding of workpieces in large-scale production. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – ready for demonstration shortly Delivery: ex-stock, as inspected Payment: strictly net, after receipt of invoice.