Tangki baja 50m³ + cangkang bagian dalam plastik

Schneider Tankbau AHL ASL Flüssigdünger-Lagertank

Kondisi: sangat baik (bekas), Weintanks und Behälter für andere Flüssigkeiten: - 2.080 l Ndodpjtzz H Sofx Ab Eed - 3.110 l - 4.290 l - 5.150 l - 7.520 l - 9.390 l - 10.650 l - 11.750 l - 12.520 l - 18.020 l

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 2022042210, de-hu-it-lt-20240623-1 Nsdpfx Aoh Ellzsb Ejdd

Kondisi: sangat baik (bekas), Dissolver agitator Geppert Mixing Technology FRW Power: 6.3 kW electric cable winch speed range: 320-2250 rpm mobile, wheeled for easy transport Ndjdpfx Aoq H R Rqjb Eod Very good condition, taken directly from production!

Kondisi: baru, Cutting diameter round: 550 mm Cutting diameter square: 550 mm Cutting diameter flat: 550 x 550 mm Saw blade length: 5980 x 41 x 1.3 mm Table height: 800 mm Blade speed: 20 - 100 m/min Total power requirement: 5.5 kW Nodpfjfg E Hwsx Ab Esdd Machine weight: approx. 3.8 t Dimensions (L x W x H): 3.0 x 2.15 x 2.2 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Machines of the SBS Series The SBS series impresses with its advanced technology, high quality, durability, and an unrivaled comprehensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic blade tensioning • Clamping pressure regulation • Double vice (before and after the blade) • Inch mode for positioning • Bundle clamping electrically and hydraulically pre-installed • Chip conveyor The SNC 20 control system enables convenient and uncomplicated input of up to 20 different sawing jobs (length and quantity). Once the desired dimension is entered, the control system automatically calculates the kerf and the number of feed cycles. Additionally, the error code display system enables rapid fault analysis and troubleshooting.

Kondisi: baru, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer best-in-class sawing technology and outstanding performance when cutting special steels. - The electrically-welded machine frame and the steel saw frame meet all cutting requirements, eliminating vibrations and noise. - The chip conveyor is hydraulically driven and has adjustable speed. Ndedpfxefg E Hpj Ab Eed - All machine movements (saw frame, vice, feed, and saw band guides) occur via modern linear guides with high static and dynamic load capacities, ensuring minimal sliding friction. - Another characteristic feature are the rollers for material positioning, powered by a hydraulic motor. These move perpendicular to the material to ensure optimal clamping. - Thanks to adjustable saw band height control, the operator can position the band close to the material’s top edge. After the cut, the band automatically returns to its previous position, or, optionally, can remain in the lower position. During the cutting cycle, the software compares the cutting load to the preset values, allowing the saw system to halt automatically in case of irregularities. - The saw band is cleaned by two adjustable steel brushes with hydraulic drive. - The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. - Finely ground carbide inserts securely clamp the saw band and are complete with lateral, hardened, and adjustable guide rollers. The adjustable blade guide travels automatically as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, managed by the machine software. Tension is automatically released after a preset time when the machine is idle or following a completed cycle. - Automatic version with CNC control available in X-TECH 900 / 1200 models, featuring a 500 mm feed stroke, ideal for high-production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, enabling precise material positioning even at maximum load. - All guided movements are driven by four recirculating ball guides with high static and dynamic load capacities, significantly reducing feed friction. The guides are hardened, ground, and prismatic. Price on request.

Kondisi: baru, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangular 1250x600 mm Cutting range at 45 degrees: round 680 mm Cutting range at 45 degrees: square 600 mm Cutting range at 45 degrees: flat 870x600 mm Cutting range at 60 degrees: round 580/550 mm Cutting range at 60 degrees: square 530/450 mm Cutting range at 60 degrees: flat 550x450 mm Saw blade length: 8140 x 54 x 1.6 mm Blade speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 5.3 t Space requirement: approx. 5.75 x 4.2 x 2.75 m 2-column double miter bandsaw for fast cutting with pusher system P15. Optionally P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to -60° Njdpfefg E Hnjx Ab Ejdd High-quality automatic miter adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved by the new "B&S positioning system". An intelligent NC control ensures smooth interaction between the linear encoder and the self-braking positioning motor, in combination with a reliable hydraulic brake via large radial center positioning. The worktable is supported by high-quality preloaded bearings, enabling very smooth rotation. CNC control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and miters. Double-sided gripper positioning system The B&S pusher system, feeding and positioning system, is equipped with "double-sided opening gripper claws" which are hydraulically controlled. This guarantees secure gripping and transporting of materials and bundles that may deviate from the ideal shape. The pusher system is separately constructed and runs on ball-bearing linear guides, precision ground rack, and is driven by a frequency-controlled, robust geared motor.

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 450 x 320 mm Saw band length 4250 x 34 x 1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre bandsaw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitres left + right 60° without machine conversion · 34 mm saw band width · Large, ball-bearing turntable work support · Saw band guides positioned via extra wide linear guides · Powerful, robust gearbox · Large-area clamping plates Nedpfx Ajfgyiceb Eedd · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Freestanding control panel, safe and ergonomic · Storage space for bands and consumables · Cutting pressure regulator, feed regulator · Fully hydraulic vise · Super fast clamping (front loading) · Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid lowering to material start or, for serial cutting, begin cutting immediately 4. Switch off saw band 5. Raise saw frame just above material 6. Open vise Optimal, material-independent cutting results thanks to fine adjustment of the saw frame using: * Pressure control valve (cutting pressure force) * Feed control valve (speed) * Switch with pictograms, simple and clear to operate

Tahun pembuatan: 2004, Kondisi: bekas, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the German Water Resources Act (WHG) Dear Sir or Madam, We offer a 30,000-liter double-walled storage tank for diesel storage, complete with a new diesel fuel dispenser including data collection unit. Nominal capacity: 30 cbm Quantity: 1 Used but fully refurbished, meaning the tank has been cleaned, reconditioned, primed, and painted. Paint finish: RAL standard color; you may also specify your own color preferences at any time. The unit is currently primed and will be painted upon order. Material: steel-in-steel, specification S235JRG2 Documentation: Manufacturer’s certificate/inspection certificate according to DIN 6616 D/2 and type plate Includes: - 1 x dipstick - 1 x vent nozzle - 1 x filling nozzle - 1 x new overfill prevention sensor Ndedoc Nktbopfx Ab Ejd - 1 x new leak detection system (supplied with leak detection fluid) - 1 x ladder - 1 x suction line Design: cylindrical storage tank with support legs/console Tank dimensions: length approx. 9,990 mm; diameter approx. 2,000 mm Weight: approx. 6,000 kg Storage: above-ground Of course, you may also customize your tank system with us! All our systems are thoroughly inspected and quality checked by selected staff in our company. Affordable delivery can be provided on request. Inspections of our equipment are possible at any time. Additional tank systems for both above-ground and underground storage are available in various sizes and can be viewed at our premises. All our tanks can also be offered without a diesel pump. Special offer: Liquid fertilizer (AHL) tank systems ranging from 10,000 to 100,000 liters. Water tanks and fire-fighting water tanks also available. Price/Shipping The price for the tank station is ex works Warstein, loaded free on truck. Delivery can be arranged at an additional cost. Lead time: immediate You will receive an invoice with itemized VAT. Furthermore, we also purchase used tank systems and, as a certified specialist company according to the Water Resources Act (WHG), can professionally empty, clean, dismantle, and remove these systems. Best regards from Warstein, Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Tahun pembuatan: 2022, jam operasional: 0 h, Kondisi: baru, Mobile cleaning centrifuge including buffer tank for wastewater, agitator, and double-diaphragm compressed air pump. - New machine - Numerous other variants and special configurations available on request Machine type: Process water centrifuge for solid-liquid separation Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: Mass finishing technology, general solid-liquid separation, coolant filtration, wet blasting systems, ... Advantages: - High output capacity thanks to acceleration forces in the unit exceeding 1,800 times gravity - Recirculating the process water reduces operating costs and is environmentally friendly - Savings on expensive additives for the mass finishing process (compound) - Economical and efficient separation of solid particles from a mixture - Suitable for process fluids up to 70°C (optional cooling available) - Frequency-controlled motor drive for smooth acceleration and deceleration of the rotor Looking for innovative solutions for surface finishing and process water treatment? We offer a wide range of equipment for mass finishing, drying, and process water technology, tailored precisely to your application. From development to production: We supply all of our products from a single source, and all are “Made in Germany.” ----- Nodef Sqfqopfx Ab Eedd Please feel free to contact us—we are happy to provide free and non-binding advice. ----- The European Commission provides a platform for online dispute resolution (OS platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunications (email, fax, telephone, messaging portal). We will first prepare a non-binding quotation for you, which also includes information about our general terms and conditions and right of withdrawal with imprint, prior to purchase/contract conclusion.

Kondisi: baik (bekas), Spectro CIROS CCD water analysis device - Height: 105 cm - Width: 150 cm - Depth: 75 cm Nedpfxjfiqn Us Ab Eedd Good condition, fully functional, can be inspected and tested on site. International shipping available. Inspection: Please note that, to avoid misunderstandings, the item can be inspected and tested under power prior to purchase. Please ask any questions before purchasing to avoid any ambiguities. For general inquiries or to arrange a viewing appointment, I am available at the phone number listed below at any time. Subject to prior sale and errors in description. VAT will be shown separately on my invoices. Shipping via freight forwarding company.