Hoftankstelle Betriebstankstelle

Schneider Tankbau Dieseltankstelle Tankanlage

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, jam operasional: 1.500 h, Fungsionalitas: berfungsi sepenuhnya, gaya potong: 630 t, daya: 90 kW (122,37 hp), berat kosong: 36.500 kg, lebar total: 2.400 mm, panjang total: 9.500 mm, berat keseluruhan: 40.000 kg, panjang pemotongan (maks.): 1.600 mm, tahun perombakan terakhir: 2024, jenis arus masuk: tiga fasa, tekanan kerja: 220 batang, Scrap Shear MS-6300e (scrap shear with electric motor) without operating fluids. Ijdpouu Upgofx Afiotf A 250 kW diesel generator can be offered separately. Model: MS-6300e Cutting force: 630 t Cutting length: 1600 mm Discharge height: 500 mm Power: 110 kW Capacity: 12-17 t/h Machine weight: 40 t (+diesel generator 4 t) Hopper size: 3850 mm x 2600 mm x 1500 mm Information: A scrap shear is designed for efficient metal scrap cutting: - Simple automatic operation - Energy-saving - Cost-effective - No foundation required Function: Scrap material is loaded into the feed area with the help of an excavator. Thanks to the horizontal loading area and the weight of the scrap itself, the material drops down into the charging chamber and the cutting zone. The scrap is compressed against the front wall and sheared by a horizontally moving tool-holder side as it presses the material through the knives on the end wall. As the tool carriage moves horizontally, the processed material is pushed through the knives at the container’s front wall. On the return stroke, scrap advances into the shear interior under its own weight. Scrap shears are available in various configurations according to customer requirements, and the output size can be selected for new orders. Inspection and test operation are possible.

Kondisi: baru, berat kosong: 17.250 kg, berat muatan maksimum: 48.700 kg, berat keseluruhan: 66.000 kg, konfigurasi gandar: 3 gandar, panjang ruang muatan: 7.550 mm, lebar ruang muat: 2.480 mm, tinggi ruang muatan: 375 mm, ukuran ban: 245/70 R 17.5, warna: abu-abu, berat operasi: 17.250 kg, Perlengkapan: ABS,

Kondisi: baru, berat kosong: 17.500 kg, berat muatan maksimum: 43.500 kg, berat keseluruhan: 61.000 kg, konfigurasi gandar: 3 gandar, panjang ruang muatan: 7.550 mm, lebar ruang muat: 2.750 mm, tinggi ruang muatan: 400 mm, ukuran ban: 245/70 R 17.5, warna: abu-abu, Perlengkapan: ABS,

Tahun pembuatan: 2004, Kondisi: bekas, en-Tank-&-Environmental-Protection-Wozniack Dear Sir or Madam, We offer a 25,000 Liter Double-Walled Storage Tank Diesel Tank ===== Nominal Capacity: 25 m³ Quantity: 1 Used, but completely overhauled; this means the tank has been cleaned, sandblasted, primed, and painted Colour Scheme: Painted in RAL colour of your choice; you are also welcome to specify your own colour preferences at any time. Material: Steel-in-steel construction, material grade S235JRG2 Documentation: Manufacturer’s certificate/inspection certificate according to DIN 6616 D/2 and nameplate Included: - 1 dipstick - 1 vent connection - 1 fill connection - 1 new max level sensor - 1 new leak detector unit with filled leak detection fluid - 1 ladder - 1 suction line Design: Cylindrical storage tank with feet/console Tank dimensions: Approx. 8,390 mm length, approx. 2,000 mm diameter Weight: Approx. 4,500 kg Storage: Aboveground Compact Diesel Dispensing Unit Piusi 70 L/min Pump: 230 Volt, max. 55 L/min (available as an option in 70 L/min) Itedoc Nkr Nspfx Afijf Of course, you can customise your tank system as well! We are happy to accommodate your colour and equipment requirements as far as possible. All our systems are thoroughly inspected and checked by our selected staff. On request, we also offer cost-effective delivery. You are welcome to visit and inspect our tanks at any time. Other aboveground and underground tank systems of all sizes are available for sale at our premises. We also purchase used tank systems at any time. Trade-in of existing systems is possible. Best regards from Warstein Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Tahun pembuatan: 2023, Kondisi: baru, Tank & Environmental Protection Wozniack – Certified Specialist Company under the German Water Resources Act (WHG) Dear Sir or Madam, We are offering a 10,000-liter double-walled storage tank for the storage of heating oil, manufactured to EN 12285-2 standard. Nominal capacity: 10 m³ (new), EN 12285-2 compliant Paint finish: RAL 7035 Material: Steel-in-steel, material grade S235JRG2 Iedpjk Dpv Aefx Afiotf Documentation: Manufacturer’s certificate / nameplate Included accessories: - 1 dipstick - 1 vent nozzle - 1 fill nozzle - 1 new overfill prevention device - 1 new leak detection unit - 1 ladder - 1 suction line Tank dimensions: approx. 5,300 mm (length) Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Storage: Above-ground Delivery time: September Best regards from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, arus masuk: 238 A, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Itsdpfx Aovf E Avjfief Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: baru, es Isdpfx Afsdy Hm Dsiotf

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, kapasitas tangki: 20.000 l, Diesel filling station – home refuelling station – tank installation – small tank station consisting of: 1 x 20m³ storage tank – brand new 1 x eco 75 fuel dispenser – brand new Description of steel tank: 20,000 litre capacity according to EN 12285-2 – Class B – (replacement for DIN 6616), above-ground, double-walled, including test certificate, suitable for installation in areas classified as earthquake zone 0. The tank is equipped with two saddle feet, a manhole with dome cover, and comes with the following fittings: • 1 fill pipe with TW locking cap and dip tube, • 1 gauge pipe with dipstick and dipstick cap, • 1 vent pipe with vent cap, • 1 brand new overfill prevention device with type approval (AIII), • 1 ladder and 1 spare socket for withdrawal purposes, • 1 optical leak detection device with type approval and leak detection liquid. Itodji Artlspfx Afisf The tank exterior is sandblasted, primed, and painted in RAL7011 iron grey. (Other RAL colours available for an additional charge.) Length = approx. 6.90 m + approx. 0.70 m (console) – Diameter = 2.00 m – Weight approx. 4.2 t – ex works, loaded free of charge – Description of fuel dispenser: Type eco 75 – not legal for trade, delivery rate up to approx. 75 l/min, suitable for diesel fuel, including: • Fuel management terminal with connection to myTecalemit cloud • Includes web-based tank data management software – basic module – • 2 ID systems (driver/vehicle) for up to 4,000 users • Identification via transponder technology • USB interface for data retrieval • Vane cell pump with single-phase asynchronous motor – 230 Volt • Oval gear meter with pulse output, accuracy approx. +/- 0.5% • Angle seat/strainer filter with fine mesh • 4 m dispensing hose DN 25 with type-approved automatic nozzle, incl. swivel joint and hose holder • Nominal suction height approx. 3.5 m / max. suction line length = 6.0 m • Robust powder-coated steel housing Dimensions: approx. 1,410 x 520 x 275 mm • Dual-line, illuminated monochrome display, character height 8 / 19 mm • Tank data memory for up to 10,000 dispensing records • Menu navigation in German, English and French Magnetic keys/transponders are additionally required. General: The price for the fuel station applies ex works Söhrewald near Kassel, loaded free of charge. (Delivery can be offered at favourable rates for an additional charge.) You will receive an invoice with VAT shown separately. The purchase is subject to our general terms and conditions. Additional tank systems (new and used) as well as rental systems are also available! Furthermore, we purchase existing tank systems and can, with certified specialist company qualification according to the German Water Resources Act (§ 62 WHG), professionally empty, clean, dismantle, and remove them.

Kondisi: diremajakan ulang (bekas), Used steel storage tank according to DIN 6616/2 (with test certificate), double-walled, designed for above-ground storage, equipped with saddle supports, 1 manhole, optical leak detector, overfill prevention device, and complete tank fittings consisting of: - 3" filling pipe with TW cap - 1" dip tube with dipstick - Euroflex 3 suction combination (max. 150 l/h) - 1 vent nozzle 2" with vent cap The tank is factory-fitted with the above-mentioned equipment and is internally cleaned. Capacity: 80,000 litres Diameter: 2,900 mm Length: approx. 12,780 mm Weight: approx. 15,750 kg Upon request, the tank can be supplied with a new coating in your desired RAL colour and optionally equipped with a ladder including an operating platform. Cost-effective delivery with our own truck is possible. Simply let us know your delivery address and you will promptly receive an exact freight quote. Isdpfehvidgjx Afijtf Should you require further information, please feel free to call us or send us an email. We also accept trade-in and purchase of tanks/containers – please contact us for details. Delivery time upon agreement! We always have similar tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 100,000 litres Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst Tel: +49 7251 915119 Fax: +49 7251 915175

Kondisi: baru, Supply voltage 230 V Battery 24 V / 100 Ah Brush diameter 510 mm Ijdpovu Hccjfx Afijtf Rotation speed 175 rpm Air suction capacity 24 L/s Tank capacity 50 / 50 liters Weight 160 kg Dimensions (L x W x H) 1,100 x 520 x 1,000 mm KREMER floor cleaning machine: Delivered with battery and charger Theoretical cleaning performance: Capacity: 2,000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/dirty water tank capacity: 50 / 50 L