Mesin penghancur kertas mesin penghancur bensin E-Star

SCHORR Holzhäcksler RR150THX 150mm

Kondisi: baru, Tahun pembuatan: 2024, en-schorrrr150thx-chip-shredder-listing-v1 Lsdpfst Ivl Aex Aahoak

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 3 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 237042, daya: 25 kW (33,99 hp), berat keseluruhan: 1.575 kg, jenis bahan bakar: listrik, warna: kuning, Based on personal experience: The battery easily lasts a full workday even under continuous operation. Internal number: M1241 Manufacturer: Schliesing Vehicle type: trailer chassis Drive type: electric Maximum wood diameter: Ø 20 cm Feed width (mm): 240 Motor power: 25 kW – torque of 120 Nm Year of manufacture: 2023 Operating hours: approx. 3 Own weight (kg): 1575 Equipment: Power Control System – Whisper Cut chipping system The Schliesing mid-range series is now also available as an electric chipper: the Schliesing 325MX-E. The powerful brushless asynchronous motor with 25 kW output and 120 Nm torque guarantees high productivity with familiar pulling power. The batteries are designed to allow a full day’s work without recharging. The 325MX-E enables emission-free chipping with low noise levels and delivers uncompromising productivity for logs up to 20 cm in diameter. Motor and chassis: • Brushless asynchronous motor with 25 kW and 120 Nm torque • Fully galvanized, corrosion-resistant single-axle chassis rated for 80 km/h including EU type approval • Robust, fixed and widened steel fenders • Heavy-duty support wheel at the front and rear support stand Lajdpsvmz N Uefx Aahek • Hitch with overrun brake and soft-dock ball coupling or DIN towing eye • LED lighting conforming to German Road Traffic Licensing Regulations (StVZO), impact-protected • Pneumatic tires 205/65 R15 C Battery: • LEP battery (Lithium Iron Phosphate) with a capacity of 300 Ah at 96 V • Enables full-day operation without recharging, no recharging required after long idle periods • Energy recovery through regeneration of blade disc kinetic energy during operation • Charging port: standard plug 220-240V/16A • Full charging time: 8 hours • Guarantee for 1,000 charge cycles at 80% State of Health (SOH) Housing / feed hopper / discharge chute: • Folding feed hopper with minimum feed depth of 1,500 mm • Fully galvanized, corrosion-resistant hopper flap • Hopper inner dimensions: width = 1,040 mm, height = 960 mm • Swiveling discharge chute with adjustable deflector • Discharge chute mounted on ball bearing turntable • Key machine parts with sound insulation (especially chipper hood and discharge chute) • Two emergency stop switches: on top of the hopper and on the side of the hopper flap Chipping system: • Chipping system with safety cut-off as per EN 13525 • Robust chipping disc Ø 655 mm, 35 mm thick • Enclosed knife system for fast, safe, and precise knife changes • Continuously adjustable chipper knives • Chipper knives can be reground multiple times for long service life (approx. 10x) • Horizontally usable counterknife and vertically usable counterblade, each two-fold for increased service life • Anti-wrap protection at the main bearing of the rotor disc Hydraulic feed: • Feed control with independent hydraulic circuit • PowerGrip feed roller, 240 mm wide, with hydraulic feed. Highly grippy, aggressive, and uniform feed through a separate hydraulic motor on each roller • Parallel-guided top roller ensures regular and uniform feed, preventing material jamming • Hydraulically adjustable feed speed and, therefore, chip size • Hydraulic tank fill level indicator OPTIONS OVERVIEW: The Whisper Cut® • V-shaped knives draw in wood more evenly and with less vibration • In combination with the centering PowerGrip roller, chipping produces minimal movement of the material

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis K&C Digital Readout, NEWLY Overhauled with Acceptance Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Center Height: 180 mm >> Distance Between Centers: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threads Possible: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Engagable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis K&C digital readout, new, 12 months manufacturer’s warranty, with operator manual Functions: Switching mm/inch, Coordinate selection ABS/INC, halving of display value, reference point, tool programming (200 tools), taper calculation, radius/diameter display, quick zeroing, counting direction switch >> 200 mm wedge-bar chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine mounts Lodpfx Ajvrckqjahoak >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stop buttons Upon request: Guards for lead and feedscrew About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Acceptance with inspection protocol. Paint finish: 2K high-gloss white. Multifix and chuck are new. For safety: This machine has a brake motor, electronic spindle protection, and two emergency stop buttons—an as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: bekas, Tahun pembuatan: 2022, Technical details: Lsdpfxou Nvd No Aahoak Power output: 13.5 kVA Speed: 20 rpm Power: 11 kW Fuel type: Diesel Voltage: 230-250 V / Hz Battery: 45 A/h Drive motor power: 11 kW Weight: 318 kg Dimensions (L x W x H): approx. 1.2 x 0.7 x 0.9 m 2 units of soundproof generators. Diesel engine: Model: LA290F; 2-cylinder; 3,600 rpm; Tank capacity: 53 liters; Battery voltage: 12V Generator: Model: LDG12S-3; Voltage: 400V / 230V; 3,600 rpm; Rated power: 10 kW; Max. power: 11 kW Performance class: G1

Kondisi: baru, en-001 Lajdetpxgtjpfx Aahjk

Kondisi: bekas, Tahun pembuatan: 2025, panjang total: 3.250 mm, de-AG-8923-1 Lasdpfx Asx E Dlujahjk

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya: 55,4 kW (75,32 hp), berat keseluruhan: 2.050 kg, jenis bahan bakar: diesel, warna: original, konfigurasi gandar: 1 as, berat operasi: 2.050 kg, berat kosong: 2.050 kg, bahan bakar: diesel, Technical Data: Round timber up to 24 cm Feed width: 300 mm Base weight approx. 2,050 kg Year of manufacture: 2022 4-cylinder Hatz turbo-diesel engine With common rail technology and diesel particulate filter Complies with EURO 5 emissions standard. Mounted on a single-axle chassis for 80 km/h Power Control System Water-cooled 4‑cyl. Hatz turbo-diesel engine 55 kW (74.8 hp) with common-rail technology and DPF Fully galvanized single-axle chassis (80 km/h) Drawbar with overrun brake Front jockey wheel Rear support stand Lighting according to German Road Traffic Licensing Regulations (StVZO), impact-protected Heavy-duty tires 205/65 R17.5 (EX) Hydraulic adjustment of feed speed, thus controlling chip size Chipper knives can be re-sharpened several times (approx. 10x) for long service life PowerGrip feed roller, 300 mm wide, with hydraulic feed Especially grippy, aggressive and consistent feed: each roller has its own hydraulic motor Discharge chute with adjustable deflector, swivelable Discharge chute mounted on ball-bearing slewing ring Relevant machine parts soundproofed Features: Engine and Chassis: Water-cooled, Stage V 4-cylinder Hatz Common Rail turbo-diesel engine with DPF, delivering 55.4 kW (75.3 hp). Automatic industrial overrunning clutch between engine and chipper disc, protecting engine, bearings, and shaft. Fully galvanized, corrosion-resistant single-axle chassis for speeds up to 80 km/h with TÜV approval. Robust, fixed steel mudguards. Provision for front jockey wheel and rear support stand. Height-adjustable drawbar with overrun brake and soft-dock ball coupling or DIN towing eye. Lighting system per StVZO with impact-protected components. Heavy-duty tires 205/65 R17.5. Fuel level indicator for easy monitoring. EU type approval (homologation). Housing/Hopper/Discharge Chute: Rotatable chipper housing with adjustable feed angle up to 270°. Lajdsv Evx Uopfx Aahjk Folding feed hopper with minimum feed depth 1,500 mm. Fully galvanized hopper flap for durability. Hopper dimensions (internal): Width = 1,160 mm, Height = 1,040 mm. Swivelable discharge chute with adjustable deflector. Discharge chute on ball-bearing slewing ring for flexible positioning. Sound insulation on relevant machine parts such as chipper hood and discharge chute. Emergency stop button on top of hopper and on the side of the hopper flap. Chipping Unit: Safety system in accordance with EN 13525. Chipper disc diameter Ø 800 mm, thickness 40 mm. Closed knife system for quick and safe knife changes. Continuously adjustable chipper knives, can be resharpened multiple times for extended service life. Horizontal counter blade can be used 4 times and vertical shear bar 2 times for long service life. Wrap protection at the main bearing of the chipper disc. Hydraulic Feed: Feed control with independent hydraulic circuit. PowerGrip feed roller (300 mm wide) with hydraulic feed for grippy and consistent material transport. Parallel guide of the upper roller for even feed without misalignment. Hydraulic adjustment of feed speed to control chip size. Hydraulic oil tank level indicator.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: bensin, Inverter Generator Husarex BSR 2000IS 2kW, suitcase type Ensure reliable power supply wherever you are! Technical specifications: - Engine type: single-cylinder, four-stroke, air-cooled - ECO mode - Engine displacement: 79.7 cm³ - Maximum engine power: 2.9 HP - Rated engine power: 2.6 HP - Bore × stroke: 46.8 × 43 mm - Starting system: manual Ledpfx Asui Nuasahjak - Fuel tank capacity: 4 L - Oil capacity: 0.38 L - Recommended oil: 10W30 - Maximum generator output: 2 kW - Rated generator output: 1.8 kW - 12V DC socket - Output voltage: 220 V - Rated current: 8.3 A - Frequency: 50 Hz - Dimensions: 498 × 290 × 459 mm - Weight: 22 kg Our generators offer excellent value for money. We ensure product quality by subjecting each production series to thorough inspections. The generator is equipped with ECO mode; activate it for low power consumption to reduce both fuel use and noise levels even further.

Kondisi: bekas, jarak tempuh: 200.000 km, daya: 93 kW (126,44 hp), pendaftaran pertama: 11/2012, jenis bahan bakar: diesel, berat keseluruhan: 3.500 kg, warna: putih, tipe perpindahan gigi: mekanis, kelas emisi: Euro 5, jumlah tempat duduk: 3, panjang total: 6.936 mm, lebar total: 1.996 mm, tinggi total: 2.750 mm, Tahun pembuatan: 2012, Perlengkapan: kunci sentral, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: baru, jarak tempuh: 10 km, daya: 133 kW (180,83 hp), jenis bahan bakar: diesel, berat keseluruhan: 3.500 kg, bahan bakar: diesel, warna: putih, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, suspensi: baja, Perlengkapan: ABS, ban musim dingin, ban musim panas, ban segala musim, filter jelaga, kantung udara, kemudi berkuasa, kendali jelajah, komputer bawaan, kontrol traksi, kopling trailer, kunci sentral, lampu kabut, pemanas jok, pemanas parkir, pendaftaran truk, pendingin udara, program stabilitas elektronik (ESP), sensor parkir, sistem immobilizer, sistem navigasi,