Lapisan

Schunk Rota NCWF 315- 91

Kondisi: baik (bekas), Tahun pembuatan: 2000,

Tahun pembuatan: 1983, Kondisi: baik (bekas), 1 console milling machine Manufacturer: RECKERMANN, Model: KOMBI 900, Year of manufacture: 1983, Serial No.: 6367P, Table size: 1,000 x 310 mm, Travel X/Y/Z: 720 x 220 x 450 mm, Tool holders: SK 50, Heavy-duty machine vice, Iiodsh E Du Dspfx Afisa Spindle speeds: 3...2800 rpm

Kondisi: bekas, Tahun pembuatan: 2014, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 20 rpm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! MAIN TECHNICAL DATA Year of manufacture: 2014 Travel distances: Longitudinal (X): mm 3,000 Cross (Y): mm 1,200 Vertical (Z): mm 1,500 Clamping table/clamping surface: Length: mm 3,200 Width: mm 1,000 Number of T-slots on the table surface: qty: 7 Size of T-slots: mm 22H12 Reference slot: mm 22H7 Distance between slots: mm 140 Max. load capacity: kg 11,000 Paint finish: graphite grey RAL 7024 and agate grey RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Max. drive power: From 198 rpm kW 30 Spindle speed range: Spindle speed: rpm 20-6,000 Max. torque: Nm 935 Speed control: 3-stage (oil-cooled), with automatic switching Feeds: X, Y, and Z axis: mm/min 2 – 15,000 Max. rapid traverse: Iiedoygipajpfx Afioa X, Y, and Z axis: mm/min 25,000 Max. feed force: X, Y, and Z axis: N 22,000 Space requirements: Length approx. BT3200: mm 8,100 (without cross conveyor + 1,280mm) Height approx. (for Z= 1500mm): mm 3,800 Width approx. (for Y= 1200mm): mm 5,000 (with spacer 4,500mm) Weight: kg approx. 20,200 Connected load: kVA approx. 52 HEIDENHAIN iTNC 530 HSCI Automatic MTE milling head, diagonal 2.5° x 2.5° Automatic tool changer with 40 positions 2 chip conveyors + cross conveyor Coolant system with 20 bar & internal coolant supply (IKZ) RepairFIT is our proven solution for a profitable entry into our product lines. The machines available in this range are procured by us following a strict selection process and undergo a comprehensive inspection (deep-dive check). After intensive cleaning, any identified obvious defects and faults are repaired professionally by our expert service team.

Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 5722, Table clamping surface: 190 x 710 mm Table travel X-axis: 390/360 mm Table travel Y-axis: 150 mm Table travel Z-axis: 280 mm Isdpfx Afjflrg Tjisia Spindle taper: SK 40 Spindle speeds: 100 – 3100 rpm Longitudinal feed: 0 – 600 mm/min Electrical connection: 380 V, approx. 1.5 kW Required space: 1400 x 1200 x 1500 mm Weight: approx. 680 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Maximaler Drehdurchmesser: ca. 380 mm Maximaler Umlaufdurchmesser über Bett: ca. 675 mm Maximale Drehlänge: ca. 500–540 mm Stangendurchlass (Hauptspindel): ca. 76 mm (3″) HAUPTSPINDEL Maximale Spindeldrehzahl: 4.000 U/min Spindelmotorleistung: 26 kW Spindelbohrung: ca. 77–88 mm Spannfutter: 8″ Kraftspannfutter GEGENSPINDEL Maximale Spindeldrehzahl: 6.000 U/min Iijdpfeyg It Dox Afija Spindelmotorleistung: ca. 11 kW Spannfutter: 6″ oder 8″ Kraftspannfutter Teileübergabefunktion ACHSEN X-Achsenweg: ca. 230 mm Z-Achsenweg: ca. 575 mm C-Achse an der Hauptspindel (Vollkonturierung und Interpolation) REVOLVER / WERKZEUGAUFNAHME Anzahl der Werkzeugstationen: 12 Plätze Angetriebene Werkzeuge (Bohren und Fräsen) Werkzeugvermessungssystem (Tool Eye) CNC-Steuerung: Mazatrol Matrix Nexus EIA/ISO-Programmierung Dialogprogrammierung Mazatrol 19″ Farb-LCD-Touchscreen KÜHLUNG & SPÄNFÖRDERUNG Hochdruck-Innenkühlung durch Spindel: 15 bar Außenkühlung über Spindeldüsen Scharnierband-Späneförderer mit seitlichem Auswurf Komplettes Kühlsystem mit Pumpen und Filtern AUTOMATION Automatische Stangenlademagazin enthalten Automatisches Spannfutter-Öffnen/Schließen Spannfutter-Statusüberwachung durch Sensoren Automatischer Werkstücktransfer zwischen den Spindeln SONSTIGE AUSSTATTUNGSMERKMALE Steigungsfehlerkompensation (X, Z) 3D-Werkzeugkompensation Helikale Interpolation Polarkoordinaten-Programmierung Gewindeschneiden (G33) Werkstückkoordinatendrehung Benutzerdefinierte Makrofunktionen Werkzeugbrucherkennung MASCHINENABMESSUNGEN & GEWICHT (ca.) Maschinengewicht: 5.000 – 5.500 kg Aufstellmaß (L × B × H): ca. 2.600 × 2.000 × 1.900 mm

Kondisi: baik (bekas), Tahun pembuatan: 1992, de_to_hu Iijdpfx Afol Tuvdoioa

Kondisi: bekas, Tahun pembuatan: 1999, x-travel 12,000 mm y-travel 3,600 mm z-travel 1,500 mm Spindle speeds 3,000 rpm Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3,600 mm Cross (Z-axis): 1,500 mm Longitudinal (X-axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of spindle nose measured from floor (head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7 : 231 : 3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse X-axis: 12,000 mm/min Z/Y-axis: 15,000 mm/min Feed motor output Iiedpfx Afjxwdygsisa X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Precision Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Compressed air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyor are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.

Kondisi: bekas, Detail teknis: Perjalanan sumbu x: 700 mm Perjalanan sumbu y: 450 mm Perjalanan sumbu z: 450 mm Kones spindel ISO: 40 (SK 40) Ukuran meja penjepitan: 760 x 420 mm Feeding meja: memanjang: 10 - 500 (rapid traverse: 1,4 m/menit) mm/menit Feeding meja: vertikal: 5 - 250 (rapid traverse: 1,4 m/menit) mm/menit Putaran spindle - tanpa langkah: 32 - 1600 / 18 step rpm Kepala spindle dapat dimiringkan kiri dan kanan: 10° kiri / kanan Pergerakan vertikal pinol: 125 mm Feeding tanpa langkah: 10 - 500 / 8 step mm/menit Rapid traverse: 1,4 m/menit Kebutuhan daya total: 6,5 kW Berat mesin sekitar: 3,0 t Dimensi mesin sekitar PxLxT: 2,3 x 2,0 x 1,85 m Fitur lain: Jangkauan spindle stock min./maks.: 2094 / 2544 mm Perlengkapan: -Pompa pendingin dengan suplai -Sistem pengukuran linier - Heidenhain ND750 Aksesori: -Catok mesin Isdpfx Aovc Avhefijia

Kondisi: bekas, Tahun pembuatan: 1982, Spindle diameter 90 mm X-travel 900 mm Y-travel 900 mm Z-axis 1200 mm W-axis 800 mm Clamping surface table 900 x 1200 mm Rotary motion 360 degrees Table load capacity 6.0 t Spindle speed 25 - 1400 rpm Spindle taper ISO 40 Power supply 380 V / 50 Hz Milling spindle drive 9.2 kW Total power requirement 35 KVA Machine weight approx. 10 t Space requirement approx. 4.5 x 2.8 x 2.5 m Iiedpfx Afstv H Uceija The machine was completely overhauled by the manufacturer in 1994, new control cabinet, new BOSCH servo drives and Heidenhain TNC 360 control (3D control), Facing slide Ø 600 mm, Traverse path 150 mm, The machine is currently not operational due to an electrical fault.

Kondisi: baru, Tahun pembuatan: 2026, Professional universal metal lathe CORMAK 330x915 is equipped with a 12-speed gearbox and an induction motor (constant speed) 1.1 kW/400V, providing maximum torque. Recommended for machining hard steels and mechanical turning operations. The machine can be used for various tasks, such as internal and external turning, taper turning, polishing, metric and imperial threading, drilling, and broaching. Technical specifications: Maximum turning diameter over bed: 325 mm Maximum length of installed workpiece (between centers): 915 mm Maximum workpiece length (chuck/steady center): 830 mm Turning diameter over cross slide: 208 mm Bed width: 160 mm Spindle bore: 38 mm Spindle taper: MT5 Tool post dimensions: 78 x 78 x 20 mm Maximum tool size: 16x16 mm Compound slide travel: 100 mm Cross feed travel: 153 mm Longitudinal travel: 800 mm Spindle speeds: 12 steps (L/H) Spindle speed range: L: 65, 90, 120, 120, 160, 300 / H: 380, 500, 640, 850, 1100, 1650 rpm Longitudinal feed range: 0.087–2.218 mm/rev Cross feed range: 0.019–0.477 mm/rev Spindle nose: MT5 Metric threads: (16) 0.25–6 mm Imperial threads: (24) 4–120 T.P.I. Tailstock quill diameter: 32 mm Iedpfx Afjm Nb Srsisia Tailstock quill taper: MT3 Tailstock quill travel: 75 mm Motor power: 1.1 kW / 400 V Coolant pump power: 0.1 kW Dimensions (with base): 1770x740x1600 mm Weight (with base): 390 kg Equipment included: - Set of 16x16 turning tools, 8 pcs (with brazed tips) - Precision revolving center MT3 - Lathe stand - 2-axis digital readout (optical scale) - 3-jaw lathe chuck 160 mm - Reversible jaws - Fixed center: MT3 - Change gears - Spindle reduction sleeve - Coolant system - Grease gun - Chuck and tool post wrench - Complete set of service tools - Safety guards meeting CE standards - User manual in Polish - CE declaration of conformity The listed price is NET. Price does not include transport costs. For further information, please contact us by phone or email. We invite you to visit our website for the full offer.