Mesin pembengkok pipa

Schwarze-Robitec CNC 60 TB MR

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2011, jam operasional: 34.797 h, nomor mesin/kendaraan: 2011-0250, Diameter pipa (maks.): 600 mm, Panjang pipa (maks.): 1.500 mm, Sudut pembengkokan (maks.): 180 °, radius pembengkokan (maks.): 200 mm, ketebalan dinding: 3 mm, Original machine built in 1996. In 2011, the unit was comprehensively overhauled by the OEM for approximately €250,000: extensive renewal of both the electrical and mechanical systems. TECHNICAL DETAILS Tube diameter: 16 – 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 – 200 mm Tube feed length: 1,500 mm Bending angle: max. 180° + springback Tube length: 400 – 1,500 mm Tube outer diameter: 28 mm – 60 mm Material Parameters Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Djdpfxjx Srklj Adgekg Performance limit (stainless steel): Ø 57 x 2 mm Motion Data Bending direction: left Forward bending speed: max. 22.0 rpm (infinitely variable) Return bending speed: constant 22.0 rpm Twist angle: max. 360° Twist speed: 50 rpm Multi-radius height adjustment: lowest tube center 55 mm Height adjustment travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control desk (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance Data Total power requirement: 55 kW Hydraulic reservoir capacity: 340 l Control System Bending planes: up to 6 (CNC programmable) Positioning system: NTB design Control unit: Schwarze-Robitec operating and control panel FEATURES - Automatic cold pipe bending machine - Pipe positioning device - Gripper - Schwarze-Robitec tube magazine - Hydraulic operation for bending table, tool clamping, guide rail, mandrel retraction, reinforced guide rail feed and return - Various bending tools for Ø 60 mm tube - Various accessories - Control cabinet cooling unit - Foot switch (dual) - Schwarze-Robitec control panel - Rittal control cabinet cooling unit type SK 3361100 Note: The machine could only be tested in setup mode due to lack of operator knowledge. No faults are known. The machine is currently dismantled.

Kondisi: perlu perbaikan (bekas), Fungsionalitas: tidak berfungsi, Tahun pembuatan: 2004, CNC Rohrbiegemaschine / CNC Tube Bending Machine Manufacturer: Schwarze-Robitec Model/Type: CNC 80 E-MR Year of manufacture: 2004/2006 Condition: Needs repair CNC: CNC PC control Beckhoff Maximum tube diameter x wall thickness: 60 mm x 3 mm Minimum tube outside diameter: 16 mm Minimum bending radius to tube centre: 25 mm Maximum bending radius to tube centre: 240 + 50 mm Maximum bending angle: 180° Max. tube lift length: 1000 mm Bending direction: right Machine weight: 7,000 kg Total installed power: 39 kW Voltage: 400 V / 50 Hz Current: 100 A Machine dimensions: 6.2 x 3.2 x 2 m Dksdpexzubvefx Adgog Equipment / Accessories - Hydraulic pressure and feed for sliding rails - Automatic tube rotation and turning device - Electric mandrel bending unit - Pneumatic mandrel rod safety lock - PC control Beckhoff - Automatic central block lubrication - Laser scanner, safety fence Machine requires repair: The planetary gearbox of the transport trolley is defective and needs to be replaced. According to quotation, spare part costs are: planetary gearbox €1,674 + gearbox flange €1,850 + pinion €850 + VAT (installation not included) The gearbox from the transport trolley is damaged and it must be replaced. Approximate costs for spare parts (without installation): - Planetary gearbox: €1,674 - Gearbox flange: €1,850 - Pinion: €850 Low-priced sale in as-is condition. Immediately available, including loading onto truck free of charge.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2011, jam operasional: 34.797 h, nomor mesin/kendaraan: 2011-0250, Diameter pipa (maks.): 600 mm, Panjang pipa (maks.): 1.500 mm, Sudut pembengkokan (maks.): 180 °, radius pembengkokan (maks.): 200 mm, ketebalan dinding: 3 mm, Original machine built in 1996. In 2011, fully overhauled by the manufacturer for approx. €250,000: comprehensive electrical and mechanical refurbishment. TECHNICAL DETAILS Tube diameter: 16 - 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 - 200 mm Tube loading length: 1,500 mm Bending angle: max. 180° + springback compensation Tube length: 400 - 1,500 mm Tube outer diameter: 28 mm - 60 mm Material parameters Tensile strength, stainless steel: max. 750 N/mm² Tensile strength, mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Axis movements Bending direction: left Bending speed, forward: max. 22.0 rpm (infinitely variable) Bending speed, return: constant 22.0 rpm Twist angle: max. 360° Twist speed: 50 rpm Dodpfewlpt Dex Adgekg Height adjustment for multi-radius tools: lowest tube center at 55 mm Vertical travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Operator panel (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic fill volume: 340 l Control system Bending planes: up to 6 (CNC programmable) Positioning device: NTB version Control unit: Schwarze-Robitec operator and control panel EQUIPMENT - Automatic cold tube bending machine - Tube positioning device - Gripper - Schwarze-Robitec tube magazine - Hydraulic operation for bending table, tool clamping, sliding rail, mandrel retraction, reinforced sliding rail feed and return - Various bending tools for Ø 60 mm tube - Various auxiliaries - Control cabinet cooling unit - Foot switch (double) - Schwarze-Robitec operator panel - Control cabinet cooling unit Rittal type SK 3361100 Note: Due to lack of operating experience, the machine was only tested in setup mode. No faults are known.