Mesin bor

SERVO 7150

Kondisi: sangat baik (bekas),

Kondisi: baik (bekas), Tahun pembuatan: 1987, Kami menawarkan kepada Anda: Mesin Gerinda Koordinat Pabrikan: HAUSER Tipe: S3-DR Tahun pembuatan: 1987 Data teknis: Jalur pergerakan: - Sumbu-x: 400 mm - Sumbu-y: 250 mm Nkedpfsxw Sx Rjx Abvsw - Sumbu-z: 300 mm Aksesori, perkakas dan alat penjepit yang terlihat pada gambar hanya termasuk dalam pengiriman jika disebutkan dalam informasi tambahan. Perubahan dan kesalahan pada data teknis serta kemungkinan penjualan di tempat lain tetap menjadi hak kami!

Tahun pembuatan: 2000, Kondisi: seperti baru (mesin pameran), The following spare parts from MORI SEIKI VL250, year 2000: 1. Turret (incomplete) Ball screw with nut for X and Z axis X and Z axis guideways — parts are from a new machine Nsdscbinnspfx Abvskw X-axis motor See photos.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feeds, very good condition, CE compliant Technical data: >> Year of manufacture: 1992; Machine no. 2102-6209 >> Rigid angle table (newly planed) >> Spindle speeds: 40 - 2000 rpm Nksdpfoxdi Ivex Abvow >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100mm >> Vertical and horizontal quill – SK40 >> Clamping system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, spare parts list About the machine: Offered is a universal milling machine Deckel FP1, CE compliant, in very good condition. The machine has very little backlash and all spindles move smoothly. Even at maximum speed the milling machine runs very quietly. A special feature is that the control cabinet is connected to the machine via a plug, making the machine easier to transport. On this newer FP1 model, feed on all three axes is steplessly adjustable, and the machine also offers rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain distance control, you can enter dimensions which the machine will then automatically approach. The FP1 was previously in a training facility, where it was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this machine under power onsite.

Kondisi: baik (bekas), Indexing head, dividing head, tool holder for grinding, drill grinding machine, cutter grinding machine, drill grinding holder, cutter grinding holder Nkedpfsb E Aquex Abvew - Accessories: for tool grinding machine - Mount: Morse taper 5 (MT5) - Center height: mm - Swiveling/rotatable/cross table - Dimensions: 400/350/H260 mm - Weight: 36 kg

Kondisi: sangat baik (bekas), jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 350 mm, kecepatan pemakanan sumbu X: 5.000 m/menit, laju pemakanan gandar Y: 5.000 m/menit, laju pemakanan sumbu Z: 5.000 m/menit, tinggi total: 2.200 mm, lebar total: 2.300 mm, panjang total: 1.990 mm, lebar meja: 400 mm, panjang meja: 800 mm, kecepatan rotasi (min.): 5.000 rpm, beban meja: 300 kg, berat keseluruhan: 2.200 kg, Universal milling machine with toolmaker's precision Small batch production up to complex workpieces Vertical milling head with hydraulic tool clamping, Y and Z milling axes Handwheels on all three axes Linear guides on all three axes Retractable work area cover with large chip protection Main motor with spindle brake X-axis travel: 450 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Table length: 800 mm Table width: 400 mm Max. table load: 300 kg Feed rate X-axis: 5,000 mm/min Feed rate Y-axis: 5,000 mm/min Feed rate Z-axis: 5,000 mm/min Tool holder: ISO 40/BT/MK Spindle power: 10 kW Spindle speed: 5,000 rpm Length: 1,990 mm Width: 2,300 mm Height: 2,220 mm Weight: 2,200 kg Njdjyucc Nepfx Abvekw Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. As such, this does not constitute representation or contractual terms. We recommend that you verify all essential details.

Kondisi: bekas, Dividing head, indexing fixture, tool holder for grinding, drill grinding machine, cutter grinding machine, drill grinding adapter, cutter grinding adapter - Accessory for: tool grinding machine - Mount: Morse taper 5 (MT5) - Centre height: 145 mm Nkodpfx Absd Ar U Esvjw - Dividing head: swivelling - Dimensions: 250/230/H300 mm - Weight: 23 kg