Mesin peledakan tembakan meja DB 1200x500

Siapro d.o.o. DB 1250x500, 1x7.5kW

Kondisi: baru, Tahun pembuatan: 2023, panjang total: 6.700 mm, lebar total: 1.500 mm, tinggi total: 2.950 mm, masa garansi: 12 bulan, berat keseluruhan: 2.200 kg, daya: 12 kW (16,32 hp), Maschinenhöhe: ca. 2.950 mm Maschinenbreite: ca. 1.500 mm Maschinenbreite mit geöffneten Türen: ca. 2.950 mm Maschinenlänge: ca. 2.950 mm Tischdurchmesser: 1.200 mm Maximale Werkstückhöhe: 500 mm Maximale Tischbelastung: 500 kg Anzahl Schleuderräder: 1 x 7,5 kW E-Eco Frequenzumrichter für Turbine: 1 Stück Strahlzeit: einstellbar Isdpfx Aevr Tbasahsbf SPS: Siemens S7 1200 + TP 4'' Filter: PC2 (1.500 m3/h) Gesamtanschlussleistung: ca. 10,5 kW Anwendung zum Strahlen von LKW-Felgen: JA Anwendung zum Strahlen von Rohren von 1’’ (24 mm) bis 8’’ (203 mm): JA Dieser Maschinentyp kann vor der Lieferung vormontiert werden, die Inbetriebnahme dauert nur einen Tag. Die Maschine ist lagernd. Ein Probelauf der Maschine in unserem Hause ist nach vorheriger Vereinbarung möglich.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, DESCRIPTION Hermle C 800 V CNC Vertical Machining Center, built in 08/2000 in Germany. This milling center operates on three axes, with maximum X / Y / Z travels of 800, 600, and 500 mm, respectively. The machine is equipped with a Sinumerik 840D CNC control, connected via LAN cable to an external computer. Additionally, the machine is fitted with a chip conveyor, hydraulic clamping, a magazine for 87 tools, a swivel finder, and a control cabinet air conditioning unit. The spindle reaches a maximum speed of 15,000 rpm. Spindle hours approx. 4,500 hrs. The total weight of the machining center is approx. 7 tons. Technical Data of Hermle C 800 V CNC Machining Center: – Travel X / Y / Z axes: 800 / 600 / 500 mm – Rapid traverse: 35 m/min – Maximum spindle speed: 15,000 rpm – Oil mist extraction – Spindle power: 19 kW – Operating voltage: 400V; 3PH; 50Hz – Control voltage: 220V AC; 24V DC – Machine dimensions (L x W x H): 2.3 x 3 x 2.65 m – Total weight: 7,000 kg Equipment of the Hermle C800V CNC Machining Center: Iodpfxeiva Dko Aahebf – CNC control: Sinumerik 840D – Tool magazine capacity: 87 slots – Toolholder type: SK40 – Coolant pump through the tool: 40 bar – Control cabinet air conditioning unit – Swivel finder – Chip conveyor Separately available as shown in the photos! – Tool presetting device – Various SK40 tool holders – Heidenhain TS32 probe, as new

Kondisi: baru, IMMEDIATELY AVAILABLE FROM STOCK!! Subject to prior sale. Ibedpfed Ixbzox Aahjf The OD pipe deburring machines remove burrs from pipes after cutting. This machine simultaneously removes internal and external burrs from pipes and profiles without requiring rotation of the pipe material. Round, square, rectangular, and various other pipe and profile shapes can be deburred within just a few seconds. Thanks to the rotation of the brush, the operator does not need to rotate the pipe. The pipe clamping system allows for precise insertion of the pipes and makes it easier for the operator to hold them during the deburring process. The removed burrs are collected in a plastic container.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, berat keseluruhan: 1.195 kg, laju aliran volumetrik: 7,25 m³/jam, tekanan kerja: 13 batang, tegangan masuk: 400 V, ATLAS COPCO GA 37 VSD ff rotary screw compressor Variable speed drive (inverter controlled) Ibsdpjt Hdh Nefx Aahjf With integrated refrigeration dryer Motor: 37 kW Capacity: 7.25 m³/min Pressure: 13 bar Operating hours: 13,200 h The compressor is fully functional

Kondisi: baru, Tahun pembuatan: 2018, For sale is an unused Rösler FKS 35 Tandem equipped with a soundproof cabin, manufactured in 2018. The system is still in its original packaging and available in our warehouse. You are welcome to schedule an on-site inspection by prior telephone arrangement. Iodpjl D Ex Dsfx Aahjbf

Kondisi: bekas, CNC travelling column drilling and milling machine ANAYAK Type HVM-3800-P Bed-type milling machine, design similar to a floor plate boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 "Refurbished 2025" The machine will be overhauled in 2025 and can then be inspected in stock at 37235 Hessisch Lichtenau. Travel distances: X: 3200 mm, Y: 1200 mm, Z: 1500 mm Table size: 3800 x 1200 mm T-slots: 8 slots, 22 mm, spacing 130 mm Table load: max. 25 tons (fixed table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar DIN 69872-B) Spindle speed: 60–4000 rpm, infinitely variable Feed speed: up to 10,000 mm/min, infinitely variable Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Power connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal head, fully automatic swiveling in two 45° axes – B+C axis - HEIDENHAIN iTNC 530 control with electronic handwheel Ijdpjxcgtgjfx Aahebf - Prepared for wireless touch probe (probe and receiver not included) - Additional HF spindle 18,000 rpm – for mounting - Free-standing control cabinet - Chip conveyor mounted between the travelling column bed and the machine table - 32,078 operating hours read - Coolant system - Free-standing hydraulic unit - Operating manual with wiring diagrams Footprint: L x W approx. 1000 x 700 cm Machine height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Kondisi: baik (bekas), Tahun pembuatan: 2004, TBT ML 200-2-800 Deep Hole Drilling Machine TECHNICAL DATA Type: ML 200-2-800 Year of manufacture: 2004 Control system: Simatic OP17 Number of spindles: 2 Spindle distance: 12 mm Drill slide stroke: 800 mm Isdpjvcbg Sjfx Aahsbf Drilling range: 1 – 10 mm Process: Single-lip drill Drilling depth: Plunging spindle: 110 mm Sealing housing: 430 mm Sealing housing with steady rest: 400 mm Spindle drive: Power: 1.7 / 2.9 / 1.3 kW Voltage: 240 / 350 / 350 V Frequency: 100 – 800 Hz Weight: Approx. 2.6 t We do not assume any liability for the correctness, completeness, or currentness of the information provided.

Tahun pembuatan: 2023, Kondisi: baru, - modern ergonomic design Ibjdpspbbc Hsfx Aahjf - manual testing process with analog dial gauge (reading accuracy 0.2 HR units) - simple operation and fast testing procedure - test space height approx. 185 mm - test space depth approx. 160 mm - dimensions 545 x 182 x 755 mm Test load ranges: 60 / 100 / 150 kg Test methods: HRA / HRB / HRC Standard scope of delivery: - Hardness tester - Prism support - Flat test table Ø150 mm - Flat test table Ø50 mm - 1/16'' ball holder with ball - 120° Rockwell diamond indenter - Spindle protection - Accessory case

Kondisi: baru, Tahun pembuatan: 2025, DPF MASTER FLASH STANDARD™ is a compact device for regenerating diesel particulate filters (DPF) using the hydrodynamic method. It features a 150-liter tank, a pump with a capacity of up to 133 L/min, and an integrated filtration system. The cleaning process is fully automated and restores up to 99% of the filter’s original factory specifications. Ibedpfogllxgex Aahsf The device comes with adapters that allow connection to all passenger car DPF filters. To further increase regeneration efficiency, we recommend purchasing the specially developed DPF Heater Pro+ drying system at a special offer price. TECHNICAL DATA: - Weight: 200 kg - Chamber external dimensions (cm): 150 x 80 x 131 - Fluid tank: 150 liters - Working pressure: 3 bar - Power supply: 3 x 400 V - Maximum output: 6 kW - Frequency: 50 Hz - Adjustable fluid temperature: 30°C to 100°C - Pump performance: up to 133 L/min - Fluid filtration: 5 - 100 microns - Safety features: temperature sensor, fluid level sensor, emergency stop switch - Declaration of conformity: CE EQUIPMENT: - Fluid level sensor - Temperature sensor - Programmable temperature controller - Programmable automatic cycle controller - 150-liter water tank - Water pump with capacity up to 133 L/min - Built-in pressure regulator (0-8 bar) - Integrated filtration system - Adapters for DPF filters When you purchase our machine, you receive a starter package to help you get started right away. The package includes: - A set of 3 filter cartridges + 3 replacement filters - XPOWER DPF Cleaner chemical kit (2 x 1 L)

Kondisi: bekas, Tahun pembuatan: 2017, We offer you: CNC Bed Milling Machine Manufacturer: DMG MORI Type: DMF 260-11 linear Year of manufacture: 2017 Control: Celos with Siemens 840D sl Operate Main spindle renewed Technical specifications: Travel paths: - X-axis travel: 2,600 mm - Y-axis travel: 1,100 mm - Z-axis travel: 900 mm Main spindle: - Speed range: 20 - 15,000 rpm - Drive power (40/100%): 46 / 30 kW - Torque (40/100%): 200 / 130 Nm - Tool holder: SK 40 Worktable: - Fixed table with integrated rotary table - Clamping area: 3,200 x 1,100 mm - Rotary table diameter: 1,050 mm - Max. table load: 1,200 kg Tool changer: - Number of tool stations: 60 positions - Chip-to-chip time: 7.5 s - Power-on hours: approx. 21,000 h - Operating hours: approx. 9,200 h Isdewtd A Nspfx Aahobf Special features: - ICS 40 bar (internal coolant supply) - Spray gun for chip extraction - Rotating inspection window - Tropical kit - Dynamic package Accessories: - Paper band filter 600 l - Chip conveyor - Heidenhain TS 649 DMG touch probe - 3D quickSET - 2x oil and emulsion mist separators - 4-color signal lamp - Electronic handwheel Accessories, depicted tools, and clamping devices are only included in the delivery if specified in the additional information. Technical data and specifications are subject to change and errors. Prior sale reserved!