Mesin

SIEMENS 1LA7130-2AA11

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, tekanan: 16 batang, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, suhu: 400 °C, tegangan masuk: 6.000 V, kecepatan rotasi (min.): 1.500 rpm, kecepatan rotasi (maks.): 1.500 rpm, jenis pendinginan: udara, Industrial steam turbogenerator Howden – model KK&K TWIN CA46, NEW, never installed and never commissioned, still under manufacturer’s warranty. Following a revision of long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, complete according to original OEM supply. The machine is NEW, entirely manufactured and tested at OEM level, but never installed or put into service. It is still covered by the manufacturer’s warranty and is stored in an indoor, climate-controlled environment. Immediate availability eliminates standard production lead times, which for this type of equipment are generally 24–36 months. Main supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP section (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical power at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless execution, suitable for parallel operation with the grid Lsdeyidvdjpfx Ah Nsag Included systems: - Integrated oil system within the base frame - Main mechanical oil pump and auxiliary electric pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - Turbogenerator simulation model ENC-RfG Typical applications: - Industrial cogeneration (CHP) plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and service steam Condition and status: - Condition: NEW - Year of manufacture: end of 2024 - Never installed – never commissioned - Still covered by manufacturer’s warranty - Complete OEM technical documentation available - Option of installation and commissioning with manufacturer’s support Possible application fields: - Biomass and waste-to-energy plants for the production of electricity and service steam, with immediate unit availability and without multi-year manufacturing lead times - Industrial cogeneration (CHP) in plants with continuous process steam demand (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants as a rapid alternative to new OEM supply with 24–36 month lead times Price: on request. Further technical information and documentation available upon request.

Kondisi: baik (bekas), Data teknis: Motor penggerak / Motor Jumlah: 4 unit tersedia Produsen: SEW Eurodrive Kondisi: Baik (bekas) Daya: 50Hz/ r/min 1461/228 KW 1,5 S1 Solusi yang disesuaikan untuk intralogistik Anda Untuk conveyor rol, conveyor sabuk, conveyor miring, atau teleskop untuk proses bongkar-muat barang Anda, kami adalah mitra profesional yang dapat Anda andalkan! Kami dengan senang hati akan menyiapkan penawaran khusus sesuai kebutuhan Anda, atau memberikan konsultasi terkait perancangan dan pertanyaan instalasi. Cukup informasikan kebutuhan dan kondisi lapangan Anda kepada kami. Manfaatkan pengalaman kami yang telah lama di industri ini serta jaringan ahli yang luas. Kami telah berhasil merealisasikan berbagai proyek untuk perusahaan dari beragam sektor—seperti logistik, industri farmasi, kerajinan, dan elektronik. Lodpfx Ajf N Hdxjh Njag Bersama Anda, kami akan mengembangkan solusi untuk mengoptimalkan alur proses dan arus material Anda secara hemat biaya dan berkelanjutan. Bahkan teknologi sortir otomatis sepenuhnya atau komponen tambahan seperti rak pengambilan barang (pick rack) maupun wadah juga dapat kami tawarkan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: belum diuji, berat benda kerja (maks.): 2.500 kg, lebar total: 3.200 mm, panjang total: 15.800 mm, jarak antara pusat: 6.000 mm, diameter benda kerja antara pusat: 850 mm, berat keseluruhan: 19.000 kg, Kami menawarkan mesin gerinda silinder CNC Hol-Monta spol.sro UB 85 / 6000 yang sangat baik, tahun produksi 2014. Model: UB 85 / 6000 CNC Tipe kontrol: Kavalir K 51-2 Nomor seri: H 214 09 005 Diameter ayun: 850 mm Jarak antar senter: 6.000 mm Ledpsy Hgrgefx Ah Neag Perlengkapan gerinda internal Penopang tetap (steadyrests) dan lain-lain.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, TUBULAR JUICE UHT STERILIZER HERSTELLER: KF ENGINEERING, DEUTSCHLAND KAPAZITÄT: 11 TONNEN PRO STUNDE GEEIGNET FÜR ALLE SÄFTE, EINSCHLIESSLICH TOMATENSAFT Lodsv Tl D Nopfx Ah Nsag MAXIMALE TEMPERATUR: 124 °C STEUERUNG: SIEMENS S7 SPS

Kondisi: baik (bekas), Tahun pembuatan: 2010, Horlemann HR10U-S Switchgear 12 kV HR 10U – the universal switchgear for industry and utility companies Modular medium voltage switchgear for solar power distribution Switchgear: Manufacturer: Horlemann Configuration: KKÜHTTT Type: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short-circuit rating: 20 kA/1s Height: 2,060 mm Width: 1,300 mm Depth: 800 mm Cell width: 7 x 650 mm Busbar: AL 50 x 10 mm Lasdpfsnfu Dyox Ah Neg Weight: approx. 620 kg HR10U Rated Data: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV Ip: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1s) IP: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast Resin Transformer: Design: Cast resin Primary voltage: 10 kV Secondary voltage: 400-230 V Vector group: Dyn5 Year built: 2010 Height: 1,740 mm Width: 1,300 mm Depth: 900 mm Weight: 1.8 t Pressure relief for the switchgear is provided via a pressure relief chamber at the bottom of the switch panel Documentation: Test report Wiring diagram Financing through our banking partner is available. komplett-konzept.leasingo.de You’ll find more new and used items in our shop! International shipping costs on request!

Kondisi: baru, Tahun pembuatan: 2016, 1 piece of overhauled, unused industrial bevel helical gear unit from ASUG. TGL 21815 All gearbox components have been replaced except for the housing! Jaw coupling: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil filling: 170 kg Input speed: n1 = 1400 rpm Output speed: n2 = 17.5 rpm Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Base length: 1170 mm !! Gear unit is not equipped with oil cooler !! Laedpfx Aegwlrdjh Nsg

Kondisi: bekas, Tahun pembuatan: 2012, Spindel mesin baru 2026 Diameter putar: 760 mm Panjang putar: 1540 mm Kontrol: FANUC Diameter chuck: 254 mm Kapasitas batang: 76 mm Lubang spindle: 86 mm Lemparan di atas bed: 1000 mm Pergerakan sumbu X: 630 x 220 mm Pergerakan sumbu Z: 1585 x 1515 mm Pergerakan sumbu Y: 230 mm Kecepatan spindle: 4.000 rpm Hidung spindle: A2-8 Rentang kecepatan spindle milling: 12.000 rpm Penukar alat: 40 posisi Turret: 12 stasiun Pemegang alat: BMT 65 P, Capto Daya penggerak: 26/22 kW Total kebutuhan daya: 100 kVA Berat mesin: ± 15,5 t Ruang yang dibutuhkan: ± 6,1 x 2,7 x 3,0 m Opsi: Pendingin tekanan tinggi 60 bar Pintu otomatis & Safety Edge Pengatur alat otomatis Pendingin jet untuk pembersihan rahang chuck Pistol pendingin Ljdpfx Aezg N Dijh Neag Tekanan chuck ganda Antarmuka LNS Bar feeder Persiapan steady rest khusus pada turret bawah Pendingin tembus untuk spindle utama dan sub spindle Fungsi monitoring beban alat Profibus Lampu patroli 3 warna Renishaw RMP60 Termasuk fungsi SKIp berkecepatan tinggi

Kondisi: bekas, Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.800 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 2.000 mm, beban meja: 5.000 kg, diameter spindel: 110 mm, tinggi total: 3.800 mm, panjang total: 5.000 mm, lebar total: 3.000 mm, panjang meja: 1.520 mm, lebar meja: 1.225 mm, panjang pemakanan sumbu X: 1.800 mm, panjang umpan sumbu Y: 1.500 mm, panjang umpan sumbu Z: 2.000 mm, Pemegang alat SK50, kontrol Heidenhain, mesin siap diambil dan siap pakai segera. Lajdsxga Tnspfx Ah Neg

Kondisi: sangat baik (bekas), SK 50 tool holders (28627) various manufacturers: Bilz Kelch Sandvik Ljdpfx Aswl U Tcjh Nsag Clarkson approx. 90 pieces

Kondisi: bekas, Tahun pembuatan: 1973, Spindle diameter: 130 mm X-travel: 3,000 mm Y-travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal: 3,000 mm Y – Spindle head vertical: 2,000 mm Z – Spindle stroke: 1,000 mm Table dimensions (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 - 2,000 mm/min Rapid traverse for spindle head and column: 5,000 mm Quill feed: 0.5 - 1,200 mm/min Spindle speed range, partially stepless: 4.5 - 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: - Heidenhain 3-axis digital readout, hardened guideways, ball screws - Steplessly adjustable spindle speeds and feeds, individual motor-driven feeds Lajdjt Hwt Sspfx Ah Nog - Travelling operator’s platform, pendant control panel, hand control unit, platform - Hydrostatic guideways in column movement - Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (h), one machined side - Hydraulic clamping for column/carriage, motorized tool clamping - Comprehensive accessories, especially tool holders with and without tools - Free-standing chip extraction unit, clamping aids, one angle plate and plates, and much more