Komponen

Siemens 6FC3988-7FA20 (ohne Karten!)

Kondisi: bekas, CNC multi-spindle automatic lathe INDEX MS 32 C Knodpeuhaqbsfx Aahof

Kondisi: baru, The fine blasting device Type FB 1 was specifically designed for mobile use. Based on the proven "sandmaster" fine blasting system and in combination with pneumatic control, the device offers highly flexible operation. In addition, the FB 1 fine blasting device can be ideally combined with other injector series blasting cabinets by using the optionally available console. As the exclusive representative for sandmaster in the Baden-Württemberg region, IS Zubehör GmbH offers the Fine-Blaster FB 1 from our showroom. - "sandmaster" fine blasting system - Abrasive grain size: Mesh 46 – 180 - Nozzle diameter: 0.8 – 2.7 mm Knedpfx Aaedrfqtehef - Fully pneumatically controlled - Dimensions: 210 x 350 x 310 mm (W x D x H) You are welcome to inspect the equipment in our showroom in Stuttgart by prior appointment. The device is available immediately.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, jam operasional: 36 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1024-54, Made in Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff number: 8460.2920 Dimensions: 235x155x145 cm Knjdpfx Aaow T Sc Nshsf TECHNICAL SPECIFICATIONS: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic increment: 1 mm Feed rate: 100–3500 mm/min Reversal delay: 0–5 sec. Max table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350x32x127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual traverse: 120 mm Swivel angle (right): 15° + 30° Optional wheelset guard for max wheel width: 50 mm WORKPIECE SPINDLE (WORKHEAD): Swivel range: 0° – 90° Speeds (nw): 80/175/380/800 rpm Internal taper: Morse 4 Collets: W-20 Drive power: 0.5 kW Max workpiece weight: 20 kg Max load during between-centres grinding: 12 Nm Option – infinitely variable speed range I: 30–300 rpm Option – infinitely variable speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill stroke: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm / measured over 400 mm: 0.002 mm Between centres: 650 mm / measured over 650 mm: 0.003 mm Roundness accuracy for between-centres grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permitted voltage variations: -15% to +10% Permitted frequency variations: +/- 3% Compressed air: 5 bar The above technical data are given without obligation and subject to errors or omissions.

Kondisi: bekas, TECHNICAL DATA Kodpfxeuhauye Aahjnf - Number of spindles: 6 independent - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - CNC control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip evacuation system: KNOLL VRF 500 - Part evacuation with conveyor at position 6

Kondisi: baru, jarak pergerakan sumbu X: 1.050 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 640 mm, gerak cepat sumbu X: 36.000 m/menit, pergeseran cepat sumbu Y: 36.000 m/menit, pergerakan cepat sumbu Z: 32.000 m/menit, produsen pengendali: HEIDENHAIN, model controller: TNC 7, lebar meja: 550 mm, panjang meja: 1.150 mm, kecepatan rotasi (maks.): 15.000 rpm, berat keseluruhan: 7.500 kg, pasokan pendingin: 20 batang, daya motor spindle: 17 W, hidung spindel: SK 40 BIG PLUS (BVD 40), jumlah slot dalam magazin alat: 30, panjang alat: 300 mm, diameter alat: 150 mm, berat alat: 8 g, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, PUSAT PEMROSESAN 3-SUMBU BARU PABRIK Kontrol dan Motor: Kontrol jalur digital HEIDENHAIN TNC 7 Paket HEIDENHAIN (motor, sistem pengukuran, handwheel) Perlengkapan Tambahan: Persiapan untuk sumbu ke-4 (meja putar) Rumah penuh dengan jendela pandang samping yang dapat dibuka ke atas Akurasi: Akurasi posisi: ± 0,005 mm Akurasi pengulangan: ± 0,003 mm Hanya permintaan dari Jerman yang akan dijawab // Hanya permintaan dari Jerman yang akan diproses Knedpshy Ar Tofx Aahef

Kondisi: bekas, TECHNICAL SPECIFICATIONS - Number of spindles: 6 - Maximum diameter: 32 mm - Spindle speed: 6,300 rpm - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X and Z axes CNC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled Knjdpfx Aajuhavdehjf - Slide unit 3.2: X and Z axes CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: X and Z axes CNC-controlled - Slide unit 5.1: X and Z axes CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled, with counter spindle - Slide unit 6.2: X and Z axes CNC-controlled EQUIPMENT - CNC: Siemens 840D - Counter spindle - Double operation console - Dual NCU - Bar feeder: IEMCA SIR MS32 F - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit: Riedel WTS 030.02-NE - Discharge system with 2 CNC axes - Fire suppression system: KRAFT UND BAUER *Note: Functionality not guaranteed. Must be inspected by a qualified company selected by the buyer.

Kondisi: baik (bekas), schleifmaschine-001 Knsdpfexcblqex Aahef

Kondisi: baru, Tahun pembuatan: 2024, Gildemeister 20ACN allows, through the SIEMENS operator panel, easy setting and modification of spindle speed, cycle time, and thread cutting speed. It can machine parts up to 25 mm in size with the same ease and precision. It offers the option to mount CNC-controlled slides. Station 6 consists of: CNC-controlled cut-off slide and pick-off slide, CNC-controlled pick-off spindle with variable speeds, synchronized and stopped. The CNC pick-off spindle, specially programmed, can be used as a C-axis. Technical data: • Max. round bar diameter: 20 / 25 mm • Max. square bar diameter: 17 mm • Bar pusher: 100 / 125 mm • Travel of main spindles: 86 mm • Longitudinal guide block travel: 50 mm • Radial slide travel: 42 / CNC 50 mm • Axial slide travel: 50 / CNC 56 mm • CNC cut-off travel: 42 mm • CNC pick-off slide travel: 42 mm • CNC pick-off spindle travel: 100 mm • Spindle speed continuously adjustable: 420 - 5,000 rpm • Rapid traverse time: 0.5 - 0.7 s • Main drive power: 11 kW / CNC 15 kW • Installation footprint without bar guide: 4,000 x 1,900 mm • Net weight: 5,500 kg Knsdpeuqh Ihofx Aahjf The Gildemeister 20AC, on the other hand, is a multi-spindle lathe aimed at highly specialized industrial sectors where precision and accuracy are essential.

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 (independently controlled) - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 32 numerically controlled axes - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: fixed X axis, Z axis CNC-controlled - Slide unit 2.1: fixed X axis, Z axis CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: fixed X axis, Z axis CNC-controlled Kedpsuhangofx Aahjnf - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: fixed X axis, Z axis CNC-controlled - Slide unit 5.1: fixed X axis, Z axis CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled - Slide unit 6.2: X and Z axes CNC-controlled - Counter spindle at position 6.1 EQUIPMENT - Control unit: INDEX C200-4 (Siemens SINUMERIK 840D) - Simpel NCU - Bar loader: IEMCA SIR MS32/33/P - Central lubrication system with high-pressure pump - Chip conveyor: KNOLL - Cooling unit: RIEDEL - Part evacuation with conveyor at position 6 - Cross drilling units at positions 3.1 and 4.1

Kondisi: bekas, Tahun pembuatan: 1991, de_001 Ksdpfoxvdtqsx Aahsnf