Mesin pengikat

SMB VERO ST 4.0 (12 Monate Garantie)

Kondisi: baik (bekas), Tahun pembuatan: 2019, jam operasional: 1.404 h, nomor mesin/kendaraan: 397, 26148 Bljdpoy Uwhbefx Afpel

Tahun pembuatan: 2004, Kondisi: baik (bekas), Diproduksi pada tahun 2004 Deskripsi/konfigurasi: Sistem lengkap untuk pengikatan palet otomatis, pembungkusan palet dengan plastik peregang otomatis. Termasuk sistem pemindahan palet yang sepenuhnya otomatis. Sistem dengan konfigurasi ""lurus"", dibangun dengan konveyor rantai dan dikonfigurasi sebagai berikut: > Konveyor rantai lurus, bermotor, pergerakan searah sisi panjang, l~1100 mm, REF 25778.01 > Pengikat palet Cyklop XZE-3111, REF 25778.30 > Konveyor rantai lurus, bermotor, pergerakan searah sisi panjang, l~1100 mm, REF 25778.02 > Konveyor rantai lurus di bawah mesin pembungkus, bermotor, pergerakan searah sisi panjang, l~2600 mm, REF 25778.03 > Mesin pembungkus palet dengan film model cincin Cyklop GL 2000, REF 25778.40 > Konveyor rantai lurus, bermotor, pergerakan searah sisi panjang, l~1100 mm, REF 25778.04 > Konveyor rantai lurus, bermotor, pergerakan searah sisi panjang, l~1100 mm, REF 25778.04" Tata letak tersedia Kecepatan maksimum dalam palet/jam: 50 palet/jam Konveyor rantai Lebar palet hingga 800 mm Panjang palet hingga 1200 mm Tinggi maksimum palet terisi (tinggi maksimum untuk melewati): ~1700 mm Tinggi sistem pemindahan palet (minimum=300 mm): ~400 mm Berat maksimum palet terisi: ~1500 kg Panjang keseluruhan peralatan: ~8000 mm Lebar keseluruhan peralatan: ~6000 mm Tinggi keseluruhan peralatan: ~3500 mm Daya input: ~15 kW (seluruh sistem) Tegangan: 400 V, 3 Ph, 50 Hz Kebutuhan udara: 6 bar Peralatan berada di gudang pusat Helmstedt dengan bandara terdekat: Hannover (~1,5 jam), Leipzig (~2 jam), Berlin (~2,5 jam) Bedpfxjhrmlko Afpoll Kondisi: dibersihkan & dalam kondisi berfungsi Ketersediaan mesin: sesuai permintaan

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 Bljdpfxjgwbbqe Afpsl No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Kondisi: baik (bekas), Tahun pembuatan: 1999, MOSCA strapping press Automatic pallet strapping machine, model KPK-121-18 Year of manufacture: 1999 The control system is Siemens S7. The strapping machine is equipped with 2 strapping heads. The press features a walk-on roller conveyor with rotating cross. Pallet occupancy dimensions (including pallet): Bledpfx Asq Svgkefpsl Length: 1,200 mm Width: 1,200 mm Min. height: 500 mm Max. height: 1,600 mm Technical specifications: Infinitely variable strap tension: 200 – 2,000 N Strap feed speed: 4.6 m/s Sealing method: friction weld seal Control panel dimensions: Width = 1,200 mm, depth = 650 mm, height = 850 mm Baler (press) dimensions: Max. clearance height: 1,600 mm Max. clearance width: 1,500 mm Compression plate length: 1,600 mm Pressing force: up to max. 50,000 N, adjustable via potentiometer Strap spacing: 440 mm Drive: pole-changing gear brake motor Rapid stroke speed: 150 mm/sec Pressing speed: 37 mm/sec Conveyor in press area: Usable width: 1,500 mm Length: 2,100 mm

Kondisi: sangat baik (bekas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in-line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Feed belts (number): 2 (adjustable feed speed) Horizontal drilling supports (number): 2 Drilling units per horizontal support (number): 2 Spindles per horizontal drilling unit (number): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (number): 6 Drilling units per lower vertical support (number): 2 Spindles per drilling unit on lower support (number): various Bodpfsh Ryhnjx Afpell Upper vertical drilling supports (number): 2 Spindles per drilling unit on upper support (number): 2 Upper vertical workpiece clamps (number): 6 Chip extraction conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Kondisi: baik (bekas), Tahun pembuatan: 2008, Mesin pengikat silang otomatis dengan meja putar Pengikatan tunggal maks paket/menit: 40 Pengikatan ganda maks paket/menit: 20 Pengikatan silang maks paket/menit: 18 Bodpfx Afog Nzv Uopell Lebar paket: 200-560 mm Panjang paket: min 200 mm Tinggi paket: 10-440 mm Diagonal paket untuk pengikatan silang: maks 560 mm Listrik: 200-440V, 3Ph AC, 50 Hz, 1,5 kW Berat: 540 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, nomor mesin/kendaraan: 55846, Used strapping machines by Mosca, model RO-TR500-3. Bodpfjvzquvex Afpjll

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Sander Type: Vario Master Model: 9480 Clearance height for pallets: approx. 2200 mm Maximum pallet pass-through width: 1300 mm Bayonet position from floor: 500 mm Year of manufacture: 1999 Type: Vertical strapping machine Operating voltage: 400 V Power: 2 kW Control voltage: 24 V Bljdottwpbepfx Afpsl The machine is installed in our workshop and has been technically overhauled. We are selling a fully functional machine.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Mesin penempel jendela KOHMANN - 750 - tahun 1999 Sistem Aliran Tunggal Panjang punching min. 100mm / maks. 1020mm Lebar punching min. 80mm / maks. 750mm Panjang film min. 50mm / maks. 720mm Lebar film min. 30mm / maks. 540mm Feeder bawah dengan pengaturan waktu Pilihan Besar Nok Operasi Pisau pemotong/perforasi Unwind film, Penyerahan sabuk kontinu, Pompa hisap dan tiup Panel Kontrol Listrik Blodpfoyzyhwox Afpjl Manual & Peralatan Lokasi: Eropa Barat Kondisi Saat Ini: Sedang produksi Tersedia: Segera Foto dan video lebih lanjut tersedia. Harga atas permintaan.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 223A011235001, masa garansi: 12 bulan, tinggi rangka: 600 mm, lebar rangka: 600 mm, Perlengkapan: dokumentasi / manual, Frame size: 600 x 600 mm Strap width: 5-9 mm Year of manufacture: 2012 Machine number: 223A011235001 Condition: Fully refurbished Our latest project was the refurbishment of this fully automatic strapping machine SMB CUBE 600x600c from 2012. At first glance or given the price, it may still be apparent on the outside that this CUBE is a used machine. However, the list of replaced components and labor hours invested makes it clear: this machine has been painstakingly restored to its original delivery condition and is now as good as new—perhaps even a bit better. As-new thanks to the CUPASO full refurbishment With our fully refurbished used machines, you get like-new technology at used machine prices. We ensure we only refurbish technology that still meets today’s requirements—this applies to the SMB CUBE 600x600c on offer here as well. For this comprehensively refurbished unit, we also offer our extensive service, including a 12-month warranty, along with long-term supply of consumables, spare parts, and technical support. Prepared for integration into automated packaging lines Even as a stand-alone machine, this CUBE can be individually configured to meet your requirements. The machine detects incoming parcels or product stacks and straps them once or multiple times according to preset parameters. With its pneumatic package press and package height-dependent strap tensioning, packages of varying sizes and properties can be processed unsorted and individually. By adding another identical machine—also available from us—even cross or multiple strapping at high throughput rates is possible. Our Promise to You Our full 12-month warranty naturally applies to this SMB CUBE 600x600c as well. This gives you peace of mind: if anything should go wrong within this period, we will replace the defective part and install it at our own cost (excluding wear parts and call-out charges). Bljdpot Uzv Tsfx Afpjl Features: • Economical operation due to maximum uptime • Robust and extremely low-maintenance design • Easiest operation • Minimal footprint • Excellent cost/performance ratio • Up to 35 packages/min; depending on strap return travel and frame size, without package compression • Machine mobile (2 fixed/2 swivel castors with brakes) • Table height 770 – 1000 mm • Motor-driven conveyor belts • Machine color: Frame RAL 7004 / Base RAL 7016 Special Features: • Signal exchange: 2 x mating connectors with tool • Additional photoelectric sensor for connection to upstream or downstream conveyor • Signal exchange: Package not strapped • External button: Package not strapped • Strap tensioning depending on package height (laser sensor) • Pneumatic package press (600x600) • Double press bar 600 • Strap entry protection on tabletop, infeed side