Mesin pembengkok mandrel

Sommer S65

Kondisi: baru, Tahun pembuatan: 2025, PROFIL BENDING ATTACHMENT PB20 The ideal supplement for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be mounted quickly and easily onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping device and pulled around the bending tool. With this system, the length of the legs to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy during bending. TECHNICAL DATA: • Bending capacity (Steel 37): 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radii R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) Hjdpfx Ahjnh R Ekswoi OUR SERVICE: • Welcome to test production in our in-house demo room • On-site consultation and informational meeting at your location • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your facility

Kondisi: baik (bekas), Tahun pembuatan: 1996, Pipe diameter 6 - 28 mm Wall thickness 2 mm Bending radius min. 2 x D Control system IPU 20 Bending radius max. 5.0 x D mm Max. bending angle 190° Mandrel length 3000 mm Operating pressure 180 bar Hydraulic motor 4 kW Machine weight approx. 900 kg Space requirement approx. 3.8 x 1.1 x 1.3 m Semi-automatic electro-hydraulic mandrel tube bending machine with PLC control for 20 preset bending angles and display in the control panel for angle specification, angle detection and angle measurement via absolute value rotary encoder, automatic tool table reset, rotation device with digital readout, hydraulic quick-action chuck, automatic mandrel lubrication, adjustable length stops. Operating modes: manual and semi-automatic. Control buttons: hydraulic on/off, operating mode selection, clamp close/open, feed forward/back, mandrel forward/back, bend forward/back, lock forward/back, mandrel lubrication, rotation device forward/back, table reset, length stop forward, emergency stop. The machine comes from prototype production and was only lightly used until 2000. Afterwards, the machines from this department were sold. However, the purchaser did not use the tube bending machine, so it has only been stored since then and has not been in operation (original paintwork). Machine offered at a special low price! Hedpfx Aovtgn Nohwoi This is a used machine; therefore, sale is made excluding any warranty. STOCK-HOLDING DEALER WITH 1600 m² SHOWROOM.

Kondisi: baik (bekas),

Kondisi: sangat baik (bekas), EOS Model: EOS M270 Metal Laser Sintering System Laser Sintering Unit 200 Watt Yb Fiber Laser Hjdpfsu Ebpcjx Ahwei Material processed with this unit: Tungsten Laser hours: 8,018 Usable build volume: 250 mm x 250 mm x 215 mm (including build platform) Layer thickness: 20 μm or 40 μm Precision optics: F-theta lens, high-speed scanner The system has been retrofitted with a Scanlab hurrySCAN 30 for improved print accuracy. Focus diameter: 100 μm Dimensions (W x D x H) System: 2,000 mm x 1,050 mm x 1,940 mm Weight approx. 1,130 kg For further technical information, please refer to the manufacturer’s documentation. Scope of delivery: EOS M270, chiller, and software Condition: used (Specifications and technical data subject to change and possible errors) If you have any further questions, we will be happy to answer them by phone.

Kondisi: bekas, Tahun pembuatan: 1981, en Hedpfx Aowh Rq Nshwoi

Kondisi: perlu perbaikan (bekas), Fungsionalitas: tidak berfungsi, Tahun pembuatan: 2004, CNC Rohrbiegemaschine / CNC Tube Bending Machine Manufacturer: Schwarze-Robitec Model/Type: CNC 80 E-MR Year of manufacture: 2004/2006 Condition: Needs repair CNC: Beckhoff CNC PC control Technical Specifications: Maximum tube diameter x wall thickness: 80 mm x 3 mm Minimum tube outside diameter: 16 mm Minimum bending radius to tube center: 25 mm Maximum bending radius to tube center: 240 + 50 mm Maximum bending angle: 180° Maximum tube feeding length: 1000 mm Bending direction: Right Machine weight: 7,000 kg Total installed power: 39 kW Voltage: 400 V / 50 Hz Current: 100 A Machine dimensions: 6.2 x 3.2 x 2 m Accessories: - Hydraulic pressure and feed for slide rails - Automatic tube turning and reversing unit - Electric mandrel bending device - Pneumatic mandrel bar safety system - Beckhoff PC control - Automatic central block lubrication Hedpfx Ahjxzubvjwsi - Laser scanner, safety enclosure Machine needs repair: The planetary gearbox of the transport carriage is defective and needs replacement. Spare part costs according to quotation (excluding installation): - Planetary gearbox: EUR 1674 - Gearbox flange: EUR 1850 - Pinion: EUR 850 - Plus VAT Cheap sale in as-is condition. Immediate availability including free loading onto truck.

Kondisi: siap digunakan (bekas), mesin untuk memperbesar dan memperkecil pipa 1 kepala Tanpa alat (dapat disediakan sesuai permintaan) Langkah: 150 mm Daya: 11 kW Dimensi: 2200 x 800 x 1200 mm Berat: 500 kg Hedpfx Ahewrt Tuswsi

Kondisi: sangat baik (bekas), Trumpf Type: TruPrint 3000 G02 The machine is in excellent condition and has been professionally tested for functionality by a technician from TRUMPF at our facility. We provide a 6-week warranty on the machine. Year of manufacture: 11/2017 Beam-on time: 17,731 hours Laser Metal Fusion machine (metal 3D printing) Flexible solution for industrial additive manufacturing The TruPrint 3000 is a universal medium-format machine (LMF / PBF / LPBF) featuring industrial parts and powder management. Effective immediately, you benefit from even more flexibility, quality, and productivity for your series additive production: Productivity is nearly doubled regardless of part geometry, and part costs are significantly reduced. Automatic monitoring and calibration of the multilaser during ongoing build jobs enables optimal quality for printed multilaser components. Latest developments in shielding gas guidance further increase part quality and reproducibility. This is documented in parallel to the build job via Melt Pool Monitoring, enabling fulfillment of traceability requirements, for example, in the medical sector. The TruPrint 3000 is highly flexible and adapts to individual customer requirements. With a build volume of 300 mm diameter and 400 mm height, it is suitable for a wide range of industries. Depending on part size and complexity, workflow preference, and production volume, you can flexibly choose between internal or external depowdering—all under shielding gas. With external depowdering, you also minimize downtimes of the 3D printer by parallelizing work processes. Technical data: TruPrint 3000 Build volume (cylinder): 300 mm diameter x 400 mm height Processable materials: Weldable metals in powder form, e.g.: stainless steels, tool steels, aluminium-, nickel-base, cobalt-chrome, copper, titanium, or precious metal alloys. Current material and parameter availability upon request. Preheating (standard) up to 200°C Maximum laser power at workpiece (TRUMPF fiber laser): 500 W Beam diameter: 100 – 500 μm Hjdpfx Aevvl I Tehwoi Layer thickness (individually adjustable): 20 – 150 μm Exposure speed (powder bed): 3 m/s Build-up rate: 5 – 60 cm³/h Connection and consumption Electrical connection (voltage): 400/460 V Electrical connection (current): 32 A Electrical connection (frequency): 50/60 Hz Shielding gas: nitrogen, argon Design Dimensions (including filter) (W x H x D): 3385 mm x 1435 mm x 2225 mm Weight (including powder): 4300 kg The system has been dismantled by the manufacturer; dismantling and functional protocols are available. All axes are professionally secured. The system was used with materials 1.44.04 and most recently with AlSi10Mg. Condition: used Scope of supply: (see picture) (Specifications and details are subject to change and error!) For further questions, feel free to contact us by phone.

Kondisi: baru, Professional shaft diameter: 180 mmUpper roller diameter: 60 mmLower roller diameter: 50 mmWorking speed: 5 m/minMotor power: 3 kWL x W x H: 1200 x 850 x 1200 mmApprox. weight: 1000 kg Technical specifications: - Welded steel frame construction - All 3 rollers are driven - Hardened and ground shafts made of high-strength special steel - Rollers are hardened and ground - Horizontal and vertical working position - Standard hardened rollers - Mobile control panel - Angular side guide rollers - Brake motor for precision bending - 2 digital displays Options: - Standard digital display - NC control unit, 7” screen, price EUR 9,000,-- HPK 50 File Type Size Min. Dia Notes 1 60x10 20x5500 250 Standard Rolls 2 80x20 50x5500 250 Standard Rolls 3 32x32 12x12400 250 Standard Rolls 4 Ø35 Ø10 350 250 Optional Rolls 5 Ø60x2 Ø15x1.5 600 200 Optional Rolls 6 2”x3.91 1/2”x2.77 400 200 Optional Rolls 7 50x25x3 20x15x2 450 250 Optional Rolls 8 45x3 20x2 600 300 Optional Rolls 9 60x60x6 30x30x4 650 350 Optional Rolls 10 50x50x5 30x30x4 550 350 Optional Rolls 11 60x7 20x3 550 250 Standard Rolls Hsdod Ab H Nepfx Ahwoi 12 50x6 20x3 500 250 Standard Rolls 13 60x7 20x3 500 250 Standard Rolls 14 UPN 80 UPN 30 600 250 Optional Rolls* 15 UPN 65 UPN 30 600 250 Standard Rolls* * Special washer (spacer) may be required / only with special beam bending attachment • Capacities are based on 260 N/mm² plate yield strength

Tahun pembuatan: 1997, Kondisi: baik (bekas), nomor mesin/kendaraan: 403970905140, Offer 23291 Technical Data: Tube end-forming machine with six-position turret - tool holder Tube diameter: 6 - 40 mm Max. forming length: 100 mm Hsdspr Utljpfx Ahwoi Drive: 400 V / 7.5 kW Required space approx.: W 1200 x D 2100 x H 1500 mm Weight approx.: 1400 kg