Wadah susun Wadah logam Wadah logam

SSI Schäfer / Feuerverzinkt / 3 Stück / Abm.: 850x550x670mm (BxTxH) / 4 Kranösen

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side Gbjdpfsh Ek Daex Adtjg - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: baik (bekas), Fungsionalitas: belum diuji, berat keseluruhan: 80 kg, lebar total: 990 mm, tinggi total: 870 mm, panjang total: 1.180 mm, tinggi tumpukan: 800 mm, kapasitas tangki: 900 l, berat kosong: 80 kg, We hereby offer you, subject to prior sale, approximately 200 used steel stacking boxes / storage containers made of galvanized sheet steel. Manufacturer: unknown Overall dimensions of the stacking box: 1180 x 990 x 870 mm (L x W x H) Stacking height: 800 mm Internal box height: 700 mm Box volume: approx. 0.9 m³ Weight: approx. 80 kg/piece Notes: The steel stacking boxes were previously used by the former owner on construction sites as containers for sorted construction waste. Emptying into larger transfer containers / skips was carried out by forklift with rotator. Therefore, the stacking containers have been manufactured with extra thick walls. Sale is subject to prior sale, excludes any warranty or guarantee, and is intended for commercial customers only. We would be pleased if the steel stacking containers are of interest to you. Your Service Team Mertens & Frowein GmbH Gsdpfxjvtckmj Adtsbg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en1 Gsdpfsmhhypsx Adtebg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Used double-sided cantilever racking: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm Gbodpfomkixwox Adteg - 24 cantilever arms, 1,200 mm deep, standard - Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including mounting material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification before delivery. Material is packed sensibly for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads. The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.

Kondisi: baru, Solid round material 30 / 900 mm Solid square material 30 / 900 mm Angle steel 35x35x5 / 600 mm T-section steel – web outward 50x6 / 600 mm Shaft diameter 40 mm Working speed 4.5 m/min Gjdeq Adtqopfx Adtjbg Roller diameter 148 mm Total power requirement 1.1 kW Machine weight approx. 0.3 t Space requirement approx. 0.75 x 0.6 x 1.4 m Electric profile bending machine - Optional horizontal or vertical operation - 1 set of hardened standard rollers - Lower 2 rollers are driven - 1 set of plastic rollers for diameter 33.7 mm / 1" - Operating manual - Foot switch for left/right and EMERGENCY STOP

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (floor anchors not included) - With assembly instructions and load labels C4 according to DIN standard - Technical telephone support - Made in Germany - Short delivery times - Collection on site possible Gbedpfemhhyasx Adtog Our cantilever racks are manufactured exclusively in Germany. We offer reliable freighting with pre-delivery notification. Materials are packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for anchoring, and able to absorb the acting loads. The customer is responsible for checking and ensuring the condition and load-bearing capacity of the subfloor as well as any permits required by authorities. Rack uprights must be anchored to the ground on-site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have a minimum overhang of 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, usable depth 1,000 mm - 12 cantilever arms, usable depth 1,000 mm, standard - Including horizontal and diagonal braces for 1,300 mm bay distance - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions possible at any time) - (*Offer available in larger quantity: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm bay distance - Rack length = 4,000 mm - Including fasteners (without floor anchors) - With assembly instructions and C4 load capacity labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance notification prior to delivery. The material is sensibly packed to facilitate easy unloading. Gbsdpjmhh Dzsfx Adtog If installed outdoors, the load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, and suitable for anchor fixing, and must support the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither required nor recommended. According to professional association guidelines, the top storage level should have at least a 500 mm overhang above the top of the upright.

Kondisi: baru, nomor mesin/kendaraan: 85162, System: Electrohydraulic Piston Diaphragm Pump (Feeding Pump / Filling Pump) NEW! Type: Abel CM-G-C262 ID No.: 85162-3 Delivery Rate: 10 m³/h Motor Power: 5.5 kW Motor Speed: 1,450 rpm Piston Diameter: 130 mm Suction-Side Flange: DN 80 PN 16 DIN 2633 Discharge-Side Flange: DN 80 PN 40 DIN 2635 Application: Filter Press Feeding Suction Pulsation Dampener: Steel Gbsdpfx Adjd E S Sfjtog Suction Manifold: 262 steel Additional Accessories: such as drain valve, pressure gauge, etc. Photo: similar design The ABEL hydraulic diaphragm simplex piston pump, horizontal configuration, is double-acting, slow-running, self-priming, and safe for dry running. The pump’s flow rate is controlled in an energy-efficient manner by a frequency converter, automatically adjusting the drive speed according to delivery pressure. Our piston diaphragm high-pressure pumps are also available in special versions for tunnel construction. Do you have specific requirements? Contact us for solutions.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 3.970 h,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: H2X387L00867, Tahun pembuatan: 2022, jam operasional: 1.108 h, kapasitas angkut: 2.300 kg, tinggi angkat: 4.400 mm, pengangkatan bebas: 1.320 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.090 mm, lebar kerangka garpu: 1.150 mm, panjang garpu: 1.100 mm, berat kosong: 3.702 kg, panjang total: 2.350 mm, jenis penggerak: Elektro, lebar konstruksi: 1.150 mm, Electric 4-wheel forklift Chassis number: H2X387L00867 Load center: 500 mm Fork width: 100 mm Fork thickness: 45 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 23x9-10 Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires size: 200/50-10 Rear tires condition: 60 - 80% Battery voltage: 80V Battery capacity: 460Ah Battery manufacturer: Linde Battery type: PzS Battery year: 2022 Battery condition: 60 - 80% Description: The unit is fully operational with the latest safety inspection (UVV). A charger is integrated into the forklift. Slight reddish discolorations due to previous use in metal construction. Sideshift, 3rd valve, 4th valve, rear working light, front working light, full cab, full free lift, interior mirror, beacon, Gjdpfx Adewz S Dwstebg