Robot

STÄUBLI RX60CR

Kondisi: bekas, Tahun pembuatan: 2008, Vertical Turning and Grinding Center Manufacturer: EMAG Model: VSC 250 DS Year of manufacture: 2008 Control system: SIEMENS 840D Grinding spindle speed: 30,000 rpm Ltjdpfx Aaeia Rtdohsa Turning spindle speed: 3,000 rpm Turret tool stations: 12 Chiller unit for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling Air through spindle Two clamping circuits through spindle (air and oil) Please note: The grinding spindle is defective but can be overhauled at a spindle repair facility. Apart from that, the machine is in very good condition and fully functional. Please contact us for further information and pictures via mail(at) or *

Kondisi: bekas, Tahun pembuatan: 1996, Grinding length: 600 mm Grinding width: 250 mm Workpiece height approx. 385 mm Clamping surface of table: 600 x 200 mm Table speed - stepless: 2 - 35 m/min Maximum table load: 250 kg Grinding wheel dimensions: ø 225 x 25 mm Grinding wheel bore: 50.8 mm Lodjt Tqrnepfx Aaheta Vertical feed, automatic: 0.001 - 0.099 mm Rapid vertical traverse: 600 mm/min Table cross feed, continuous: 10 - 1000 mm/min Rapid cross traverse: 1000 mm/min Total power requirement: 6 kVA Machine dimensions L x W x H: 2.65 x 1.70 x 2.28 m Accessories: Digital readout on Y and Z axes, magnetic chuck 600 x 200 mm, grinding wheel with flange, wheel dressing device, wet grinding system with paper band filter.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, panjang penggilingan: 620 mm, lebar di tengah: 680 mm, diameter roda gerinda: 350 mm, lebar total: 500 mm, Condition of the machine: Ltedsrz Nflepfx Aahea The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete disassembly of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the entire machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand-scraping of the X-axis guideway - Hand-scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measuring protocol for TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be repainted, the rest of the machine retains its original paintwork Electronics: The complete electronics of the machine will be checked and tested, and defective switches and cables will be replaced

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, nomor mesin/kendaraan: MA0139_1335, Showroom unit immediately available: New Kaeser Aircenter SK 22 – 8 bar screw compressor with integrated refrigeration dryer and air receiver Control system: Sigma Control 2 Year of manufacture: 2024 Operating hours: 1 h Pressure: 8 bar Rated power: 11 kW Free air delivery at 7.5 bar: 2.00 m³/min Sound level: 66 dB(A) Compressed air outlet: 1" Air receiver: 350-litre capacity Lodpfxohwwyrs Aahota Pressure dew point, refrigeration dryer: +3°C Electronically controlled condensate drain: ECO DRAIN Dimensions (L x W x H): 750 x 1335 x 1880 mm Weight: 579 kg Attractive leasing options for new machines available through our partner bank. Visit our showroom. We always have a wide selection of new and used compressors in stock!

Kondisi: baik (bekas), daya: 30 kW (40,79 hp), Tahun pembuatan: 2010, jam operasional: 51.548 h, suhu lingkungan (min.): 3 °C, suhu lingkungan (maks.): 45 °C, tekanan (maks.): 8 batang, kecepatan rotasi (maks.): 2.945 rpm, nomor mesin/kendaraan: 100609.1, Perlengkapan: Pelat tipe tersedia, The Kaeser ASD 57 is an energy-efficient screw compressor designed to provide reliable compressed air supply for industrial applications. It features a compact design and quiet operation. Equipped with advanced Sigma Profile technology and intelligent control, it ensures optimal performance and durability. Ltodpst Iwyujfx Aahja Technical details: Item number: 100609.1 Serial number: 1941 Year of manufacture: 2010 Rated power: approx. 30 kW Maximum operating overpressure: 8 bar Motor speed: 2,945 rpm Condition: Used (see images and nameplate)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: F21/0023666, Perlengkapan: dokumentasi / manual, Technical specifications: Maximum load: 20 kg Rated load: 7 kg Reach: 1000 mm Number of axes: 6 Repeatability according to ISO 9283: ± 0.03 mm Pneumatic interface: 2 direct lines between base and forearm 2x 5/2-way bistable solenoid valves (compressed air) Electrical interface on the arm: 17 electrical I/O lines Ltodspd In Djpfx Aahsa Multi-bus cable in the arm: 13 electrical lines, 4 multi-bus Cat5e lines, DIN M12 Standards and protection ratings: Cleanroom standard – ISO 14644-1: Class 5 Protection class (wrist): IP65 (*IP67) Safety: Absolute encoders up to SIL3-PLe class ensure the highest safety levels. Control and licensing: CS9 controller with VAL3 license Controller power supply: 3x400-480V-50/60Hz Other equipment: Operating panel (with 5m cable) This robot not only offers impressive technical parameters but also ensures the highest safety standards thanks to SIL3-PLe class encoders. With a wide range of applications and precise repeatability, it is ideal for various industrial purposes. For further information or a tour, please contact us by email or phone (in English). We are happy to answer your questions and look forward to your inquiry.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Two-axis positioner for KUKA industrial robots Maximum payload: 500 kg Position repeatability accuracy: 0.1 mm Construction height: 982 mm Tilting range: +/- 93° Ltsdpelhr H Hefx Aahja Rotational range: unlimited Installation position: floor-mounted Rated welding current (100% duty cycle): 500 A (60% duty cycle): 600 A

Kondisi: bekas, Tahun pembuatan: 2018, Der UR3-Kollaborationsroboter, ein 6-Achs-Roboterarm mit einer Traglast von 3 kg und einer Reichweite von 500 mm, wird zum Verkauf angeboten. Die Roboter wurden überwiegend zu Demonstrationszwecken mit geringer Betriebsdauer eingesetzt und befinden sich in einem ausgezeichneten Zustand. Vor dem Versand wird jeder Roboter einer umfassenden Prüfung unterzogen und sicher verpackt. Ledpfx Ajwdl Sgsahsta

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10014487, kapasitas angkut: 240 kg, jangkauan lengan: 2.896 mm, We offer industrial robots manufactured by KUKA. The scope of delivery includes the robot arm, control cabinet, and the corresponding cables. The robots come from a fully operational system and have been professionally dismantled. We perform a functional test and inspect the robots. If you are interested, we can demonstrate the robots to ensure they meet your requirements. We grant a 14-day return policy for these units. Further warranty services are excluded. - Optional at additional cost - We are pleased to offer you a new feature for our robots: the Siemens S7-1200 Profisafe safety controller. With this controller, you can easily integrate an emergency stop function, safety door interlock, and start-stop interface via the Profisafe bus. The controller is fully configured and programmed, enabling a straightforward standalone solution with one robot and a safety fence. Additionally, we can provide further assistance with commissioning as required. We have an extensive inventory of these robots, and the listed prices are package prices. Discounts are negotiable for larger order quantities. Please feel free to contact us again to discuss further details. Ltjdpfx Aajrlmunehsa Sale exclusively to commercial customers.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, kapasitas angkut: 5 kg, jangkauan lengan: 704 mm, Fanuc LR Mate 200 iC Robot (E-29388) with Cell Vision System Country of origin: Japan Year: 2007 Controller: R-30iA MATE Number of axes: 6 Payload capacity: 5 kg Reach: 704 mm Repeatability: ±0.02 mm Lodpfx Aaeqgck Dshota Robot weight: 27 kg Camera: Sony XC-56