Stäubli TX200

Stäubli TX200

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, jam operasional: 200 h, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, panjang total: 2.700 mm, Oferuję nową maszynę do wielkoformatowych rozwiązań termoplastycznych do druku 3D. Sterowanie: Stäubli / Cead - Profinet pełna kontrola Robot: Stäubli TX200L - zasięg 2700 mm, ładowność 100 kg Ekstruder: Cead E25 o wydajności 12 kg/h Suszarnia VIZMATEC 100l z automatycznym dozowaniem dla ciągłej produkcji. Hjdpfx Ajurvzrsbhjfc Do generowania trajektorii robota używany jest kod G-CODE/NC.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya: 4,4 kW (5,98 hp), Schiatti Angelo FPD60 double-sided drilling machine Hfsdpfx Aowd Ertebhjc Max. drilling depth: 1,100 / 1,300 / 1,600 mm Glass thickness: 2-28 mm Max. diameter: 3-100 mm (automatic), 3-200 mm (manual) Spindle speed: 200 - 4,500 rpm, frequency-controlled Power requirement: 4.4 kW

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2017, jam operasional: 800 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 1.000 kg, kapasitas angkut: 130 kg, jangkauan lengan: 2.590 mm, rentang pivot: 360 °, produsen pengendali: Stäubli, tegangan masuk: 400 V, jenis arus masuk: AC (pendingin udara), akurasi pengulangan: 0,05 mm, We are offering for sale a high-performance Stäubli TX200L CS8CHP industrial robot, which has undergone a thorough diagnostic test by the Stäubli service team. The test results confirm that the robot, with only 400 operating hours, is currently in a condition comparable to a new machine. For a more detailed overview, the service report is available in PDF format. Technical specifications: - Rated payload: 100 kg - Reach between axis 1 and 6: 2594 mm - Repeatability (ISO 9283): ± 0.06 mm - Maximum speed at center of mass: 12 m/s - Cleanroom standard (ISO 14644-1): 5 - Protection class (wrist): IP65 (*67) Equipment and features: - Control unit: Stäubli CS8 series CS8C HP - Digital I/Os: 16/16 - Connection cable: 10m length - WMS mode selection and SP1 operator panel - Docking station Components and interfaces: - Pneumatic system: 2 solenoid valves, 5/2-way monostable, and 3 direct lines between base and forearm. - Electrical system: 1 socket, 19 contacts (7 twisted pairs, 2 shielded, 3 power contacts). - Extension option: Ethernet, 19-pin circular connector with 5 twisted pairs and 3 power contacts. Thanks to its calibration and powerful features, this robot is ideally suited for precision applications, including machining tasks. It is fully equipped and ready for immediate use in industrial settings. Hfedsvcf N Depfx Abhec For more information or to arrange a viewing, please do not hesitate to contact us. We look forward to working with you.

Kondisi: bekas, Tahun pembuatan: 2008, Vertical Turning and Grinding Center Manufacturer: EMAG Model: VSC 250 DS Hfodpfx Abjia Rtdjhjc Year of manufacture: 2008 Control system: SIEMENS 840D Grinding spindle speed: 30,000 rpm Turning spindle speed: 3,000 rpm Turret tool stations: 12 Chiller unit for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling Air through spindle Two clamping circuits through spindle (air and oil) Please note: The grinding spindle is defective but can be overhauled at a spindle repair facility. Apart from that, the machine is in very good condition and fully functional. Please contact us for further information and pictures via mail(at) or *

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, panjang penggilingan: 620 mm, lebar di tengah: 680 mm, diameter roda gerinda: 350 mm, lebar total: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete disassembly of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the entire machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Hfsdpferz Nflox Abhec Geometry: - Hand-scraping of the X-axis guideway - Hand-scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measuring protocol for TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be repainted, the rest of the machine retains its original paintwork Electronics: The complete electronics of the machine will be checked and tested, and defective switches and cables will be replaced

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, TRUMPF TruDisk 5001 (6C) * Year of manufacture: 2017, as new * Laser power: 5 kW * Wavelength: 1030 nm * Beam quality: 4 mm mrad * Beam switch with 4 fiber outputs, min. fiber diameter: 100 µm * Fiber connector: LLK-D * Optional: Fieldbus interface & IIO3 card available Hfodpoqfguaofx Abhoc * 2 units available

Kondisi: bekas, drehdurchmesser-260-osp500 Hodewm Rrdepfx Abhefc

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), Single-screw extruder WEBER NE5 1-30:D with 2 WEBER ZE30 co-extruders Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: Suitable for PE, PP, or three-layer pipe production, or for sheathing pipes with strip application The line was used for manufacturing heating pipes Condition: Very good Hodpfx Aehy Tp Dobhefc 2 units WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe line is my property Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn/Grabstede, Germany

Tahun pembuatan: 1988, Kondisi: bekas, nomor mesin/kendaraan: 103.071.3156.78192, Saw blade diameter: 400 and 425 mm Cutting capacity at 90° round: 130 mm Cutting capacity at 90° square: 120 x 120 mm Mitre cutting capacity at 45° round: 130 mm Mitre cutting capacity at 45° square: 110 x 110 mm Cutting speeds: 11 and 22 m/min Feed rates: 670 mm/min Cut length: with automatic feed up to 1200 mm Hfedpoz N Amefx Abhjc Electrical connection: 380 V, approx. 4 kVA Saw drive: 1.6/2.5 kW Space requirement: 1800 x 3800 x 2000 mm Weight: approx. 1800 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Swing diameter 330 mm Turning length 750 mm Control unit WEILER D3 Quill diameter 50 mm Quill stroke 130 mm Taper in tailstock quill MK-3 Spindle speeds 1-4500 rpm Main spindle taper MK-5 Machine weight approx. 1400 kg Required space approx. 1900 x 1300 x 1800 mm This WEILER E30x750 is in very well-maintained condition and can be inspected by arrangement with the seller. - Lever quick-action chuck for collets DIN 6343-48/173E and Rubber-Flex collets, clamping range 3–42 mm diameter, with mechanical and electrical interlock, max. speed 4500 rpm - 1 set of collets DIN 6343-48/173E - Adjustable hollow spindle stop 38–48 mm for main spindle - Travelling steady with sliding jaws, passage 10–85 mm - Three-jaw chuck with wedge-bar system, diameter 160 mm, bore 42 mm, mounting as per DIN 55027 /5, including 1 set of master jaws and hard reversible top jaws - Lever quick-action chuck for collets DIN 6343-48/173E and Rubber-Flex collets, clamping range 3–42 mm diameter, with mechanical and electrical interlock, max. speed 4500 rpm - 1 set of collets DIN 6343-48/173E - Adjustable hollow spindle stop 38–48 mm for main spindle Hsdpfxox Szpwo Abhjfc