Geser pelat - hidrolik

STÜCKMANN & HILLEN 165.03

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Ihjdpshzbipsfx Ag Rsw Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Kondisi: bekas, Tahun pembuatan: 1980, nomor mesin/kendaraan: xxxx, 24211 Technical Specifications (approx.): - Max. working width: 1020 mm - Max. material thickness at 40 kg/mm² tensile strength: 1.5 mm - Manual back gauge adjustable up to: 550 mm - Front angle stop - Sheet holder - Table size: 1100 x 650 mm - Working height: 900 mm - Required space (approx.): W 1800 x H 1450 x D 850 mm - Weight (approx.): 400 kg - Mobile Ijdst H I Aqopfx Ag Rohw

Kondisi: baru, penahan belakang: 750 mm, - Capacity 1050 x 6 mm - NC electric back gauge - Foot switch - Rear photoelectric safety guard Iedpfx Agsgg N Hbs Rohw - Support arms - Cutting line illumination - Brake motor - Emergency stop - Documentation - Weight 1800 kg - 400V

Kondisi: baik (bekas), Automatic drawer warehouses are the ideal system for the vertical storage of steel bars and profiles with lengths of 3 m, 6 m, and 12 m, as well as heavy accessories, semi-finished products, components, molds, and long materials in general. The load capacity per storage unit ranges from a minimum of 5,000 kg to a maximum of 6,000 kg. Ijdpevvlntefx Ag Rshw

Tahun pembuatan: 1980, Kondisi: baik (bekas), 22501 Technical data (approx.): - Max. working width: 1020 mm - Max. material thickness at 40 kg/mm² tensile strength: 1.5 mm - Manual back gauge adjustable up to: 550 mm - Front angle stop - Sheet holding device - Table size: 1100 x 650 mm Ihjdpfokzik Hox Ag Rsw - Working height: 900 mm - Required floor space (approx.): W 1800 x H 1450 x D 850 mm - Weight (approx.): 400 kg - Mobile

Tahun pembuatan: 2020, Kondisi: siap digunakan (bekas), A compressor system from plant manufacturer Rico, comprising two Atlas Copco compressors, two refrigeration dryers, and an oil-water separator system (Beko), also from Atlas Copco, is available. 1) Atlas Copco GA 45 VSD+ screw compressor, year of manufacture: 2020, air flow: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200 mm / 1100 mm / 2000 mm, weight: approx. 860 kg. 2) Atlas Copco GA 45 VSD FF screw compressor, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. 3) 2x Atlas Copco FX 15 refrigerated compressed air dryers, air flow: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant charge: 2050 g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900 mm / 750 mm / 1000 mm, weight: approx. 160 kg. 4) Atlas Copco Equalizer 4.0/ES6-MK5 compressor management system, control capacity: 2–6 compressors. 5) Beko ÖWAMAT 15 oil-water separator, throughput capacity range: 6 m³–30 m³/min, oil outlet: DN40, tank volume: 115.5 l, filling volume: 84.3 l, oil collection container: 2x10 l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100 mm / 550 mm / 800 mm, weight: approx. 40 kg. Plant operating hours: 8,656 h, controller hours: 42,334 h. Documentation available. On-site inspection possible. Ihsdpfjxdc Uvox Ag Row

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 100.000 h, tekanan (min.): 10 batang, tekanan (maks.): 10 batang, jenis pendinginan: air, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pengering pendingin, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, with integrated refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Inlet pressure 1 bar Ihedpfju Rptyox Ag Rsw Inlet temperature 20 °C Relative humidity 0% Usable volume flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) per ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4,867 rpm Shaft power requirement at maximum operating pressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air flow 0.23 m³/s Oil filling quantity 12.2 l Residual oil content under reference conditions

Kondisi: baik (bekas), Tahun pembuatan: 1992, nomor mesin/kendaraan: 9207102, Offer 12001 Technical Specifications: - Material thickness: 1.25 mm - Max. throat depth: 180 mm - Roll center distance: 63 mm - Max. material thickness at 40 kg/mm² tensile strength: 1.25 mm - Working speed approx.: 6 + 12 m/min Ihjdpoi Hpmtsfx Ag Rjw - Drive: 400 V / 0.7 / 0.85 kW - Required space (approx.): W 550 x H 1250 x D 1000 mm - Weight (approx.): 120 kg - Includes: Electronic foot switch

Kondisi: baik (bekas), Tahun pembuatan: 2008, Ukuran meja 1600 x 750 mm, kapasitas muat meja 1.500 kg, pergerakan XYZ 1525 x 762 x 625 mm, kecepatan gerak cepat 24 m/menit, daya spindle 18,5 kW, kecepatan spindle 6.000 rpm, ATC 40 stasiun, taper spindle BT50, pendinginan melalui spindle, konveyor serpihan, kontrol Fanuc 21i. Ihodpfexwytcsx Ag Rsw

Kondisi: bekas, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 40 [kW] - Spindle speed: 12,000 [rpm] - Gearbox - Number of spindle speed ranges: 2 LINEAR AXES - Travel path X/Y/Z axes: 2400/1650/1750 [mm] - Rapid traverse speed (X/Y/Z): 42 [m/min] - Feed rate (X/Y/Z): 20 [m/min] SWIVEL AXIS B - Travel path: 360 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 116 - Tool change time: 3.8 [sec] PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1600 x 1250 [mm] - Number of pallets: 2 - Max. pallet load: 5,000 [kg] - Distance from table center to spindle nose: 100 - 1750 [mm] - Max. workpiece diameter: 2,500 [mm] - Max. workpiece height: 1,850 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive: 86 [kVA] WEIGHT AND DIMENSIONS - Required space: 9,485 x 6,155 [mm] - Machine height: 4,370 [mm] - Machine weight: 50,000 [kg] OPERATING HOURS - Operating hours: 15,446 [h] ACCESSORIES Ihjdpfew Ephbox Ag Row - Control: Fanuc 31i-model B5 - Interface: Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic handwheel - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 70 [bar] * Internal coolant supply (IKZ) * with paper filter * with coolant chiller * with rinsing gun * with cabin wash - Chip conveyor - Spindle cooling - Tool probe system - Workpiece probe system: Renishaw RMP60 - Tool breakage monitoring: SOFT AC - Number of pallets: 2 - Vice - Tool holders