Pusat pemesinan universal

KEPPLER HDC 3000, 5-achsig

Kondisi: bekas, Tahun pembuatan: 2014, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 20 rpm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! MAIN TECHNICAL DATA Year of manufacture: 2014 Travel distances: Longitudinal (X): mm 3,000 Cross (Y): mm 1,200 Vertical (Z): mm 1,500 Clamping table/clamping surface: Length: mm 3,200 Width: mm 1,000 Number of T-slots on the table surface: qty: 7 Size of T-slots: mm 22H12 Reference slot: mm 22H7 Distance between slots: mm 140 Max. load capacity: kg 11,000 Paint finish: graphite grey RAL 7024 and agate grey RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Max. drive power: From 198 rpm kW 30 Spindle speed range: Spindle speed: rpm 20-6,000 Max. torque: Nm 935 Speed control: 3-stage (oil-cooled), with automatic switching Feeds: X, Y, and Z axis: mm/min 2 – 15,000 Max. rapid traverse: X, Y, and Z axis: mm/min 25,000 Max. feed force: Itedeygipaopfx Afisf X, Y, and Z axis: N 22,000 Space requirements: Length approx. BT3200: mm 8,100 (without cross conveyor + 1,280mm) Height approx. (for Z= 1500mm): mm 3,800 Width approx. (for Y= 1200mm): mm 5,000 (with spacer 4,500mm) Weight: kg approx. 20,200 Connected load: kVA approx. 52 HEIDENHAIN iTNC 530 HSCI Automatic MTE milling head, diagonal 2.5° x 2.5° Automatic tool changer with 40 positions 2 chip conveyors + cross conveyor Coolant system with 20 bar & internal coolant supply (IKZ) RepairFIT is our proven solution for a profitable entry into our product lines. The machines available in this range are procured by us following a strict selection process and undergo a comprehensive inspection (deep-dive check). After intensive cleaning, any identified obvious defects and faults are repaired professionally by our expert service team.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 19.600 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 1.500 mm, produsen pengendali: Heidenhain, model controller: 530, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, mesin dalam kondisi baik 5 sumbu simultan Meja putar: 1700 mm Beban meja: 6 hingga 9 ton Itsdpfxoytt Elo Afisf Jam spindle: 9000 jam

Kondisi: hampir baru (bekas), Tahun pembuatan: 2007, Nachgerüstet: 2026 Numerische Steuerung: NUEVO/NEW HEIDENHAIN TNC-i640 Technische Daten Abmessungen Tischabmessungen: 4500 x 2000 mm Anzahl T-Nuten: 11 T-Nuten-Maße: 22 mm Verfahrwege Verfahrweg X-Achse: 4000 mm Verfahrweg Y-Achse: 3000 mm Verfahrweg Z-Achse: 1000 mm Vertikale Bearbeitungshöhe (VC): 240 - 1240 mm Abstand zwischen den Ständern: 2500 mm Iodpfx Aeyf Rrtefietf Fräskopf Automatisch schwenkender Differentialkopf (UAD - 0,1°) Werkzeugspannsystem: hydraulisch Aufnahmekegel: ISO50 Drehzahlbereich: 6000 U/min Spindelleistung: 30 kW Vorschübe Vorschub: 5000 mm/min Eilgang (X / Y, Z): 15000 / 12000 mm/min Gewicht und Abmessungen Max. Tischbelastung: 10000 kg Maschinengewicht ca.: 35500 kg Maschinenmaße ca.: 10975 x 4770 x 5345 mm Zubehör Einhausung mit 2 Schiebetüren und neuem umlaufenden Schutzgitter Automatischer Werkzeugwechsler: ATC-60 (Verkauf auch ohne ATC möglich) Späneförderer: 1 querlaufend Elektronisches Handrad: Neu, HR-510 Kühlung: externe und interne Hochdruck-Durchspülung durch die Spindel Verkaufsbedingungen Gewährleistung: 6 Monate auf mechanische Ersatzteile Preis und Verkaufsbedingungen: auf Anfrage Alle technischen Daten anzeigen

Kondisi: bekas, Tahun pembuatan: 2008, jam operasional: 16.772 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 1.500 mm, posisi kepala milling: Automatico 2,5ºx2,5º, kecepatan spindel (maks.): 4.000 rpm, lebar meja: 1.000 mm, beban meja: 10.000 kg, panjang meja: 4.200 mm, tinggi total: 4.000 mm, lebar total: 3.500 mm, panjang total: 10.000 mm, berat keseluruhan: 21.900 kg, Mesin Frais LAGUN GBM42 Itodpfxjyiu Rnj Afijf

Kondisi: bekas, en-SLM Solutions Type: SLM 500 Build volume (L x W x H): 500 x 280 x 365 mm (subtract substrate plate height) 3D Optics Configuration: Quad (4x 700 W) Build rate: up to 345 cm³/h Variable layer thickness: 20 µm - 90 µm Min. feature size: 150 µm Focus diameter: 80 µm - 115 µm Max. scan speed: 10 m/s Average shielding gas consumption during build: 16 l/min (argon) Average shielding gas consumption during flooding: 250 l/min (argon) Powder supply with 90 kg Electrical connection / Power consumption: 400 Volt 3NPE, 63 A, 50/60 Hz, 8-5.5 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1], 7 bar Itedpfx Afjv Iff Neisf Machine dimensions (L x W x H): 6080 mm x 2530 mm x 2620 mm Machine weight (without/with powder): kg, kg with powder Was operated with Aluminum AlSi10Mg! Laser hours: 1689 h Condition: used Scope of delivery: (See photo) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, diameter putar di atas sled silang: 500 mm, lubang spindel: 75 mm, panjang pembubutan: 1.000 mm, diameter pembubutan: 500 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Dormac CY-K500T Teachin Lathe Turning diameter over bed: 500 mm Spindle bore: 75 mm Turning length: 1000 mm Transport dimensions (LxWxH): 300x180x210 cm Itjdorfxihjpfx Afief Weight: 2800 kg Control: Fagor Year of construction: 2009 Options: Includes tooling and documentation Location: Hamont-Achel, Belgium Call or email for further information. Please also see our other listings. We are always looking for industrial machinery throughout the year. If you have surplus machines, please email us with photos and details.

Kondisi: belum diuji (bekas), Tahun pembuatan: 2010, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 1159, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 1.700 mm, jumlah slot dalam magazin alat: 40, sudut putar sumbu A (min.): -105 °, sudut putar sumbu A (maks.): 105 °, Perlengkapan: dokumentasi / manual, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine within the specified period between 28.07.2025 and 31.07.2025. Machine includes approx. 90 tool holders TECHNICAL DETAILS Travel distance X-axis: 4,000 mm Travel distance Y-axis: 1,200 mm Travel distance Z-axis (horizontal): 1,700 mm Travel distance Z-axis (vertical): 1,690 mm Rapid traverse: 30 m/min Swivel Head and Axis System Swivel head: Double-axis universal swivel head, continuously adjustable in both axes Clamping: Axes can be hydraulically clamped via M-function Itsdpfxewu E Ezo Afijf A-axis Working range: ±180° Torque without clamping: max. 1,750 Nm Torque with clamping: max. 2,500 Nm Direct measuring system: ±3″ B-axis Working range: ±180° Torque without clamping: max. 4,200 Nm Torque with clamping: max. 12,000 Nm Direct measuring system: ±5″ Spindle Speed range: 20 – 8,000 rpm Power at 40/100 % duty cycle: 33/24 kW Torque at 40/100 % duty cycle: 382/278 Nm Tool magazine Number of tool positions: 40 Tool holders included: approx. 50 HSK 100 + 40 HSK 100 in the magazine Max. tool weight: 20 kg Tool length: 460 mm Max. tool diameter (adjacent slots full): 125 mm Max. tool diameter (adjacent slots empty): 200 mm Tool change time: approx. 8.5 s Chip-to-chip time: approx. 9.5 s Control Control system: Siemens SINUMERIK 840 D-POWERLINE Rotary Table Type: NC rotary table with direct drive Faceplate diameter: 1,900 mm Max. load (horizontal/milling/turning): 5,000 kg Rotational accuracy: 0.02 mm Planarity accuracy: 0.015 mm over 1,000 mm Nominal speed: 180 rpm at 100 % duty cycle Total clamping area: approx. 4,300 × 1,200 mm (not including full diameter of NC rotary table) T-slots: 11 × 18H7 MACHINE DETAILS Installation dimensions: 8,000 x 6,000 x 5,000 mm Weight: 45 t Transport width: approx. 3,450 mm Transport length: approx. 6,900 mm Loading height: approx. 4,015 mm EQUIPMENT - Double-axis universal swivel head with infinitely variable adjustment - Direct measuring systems in A/B axes - NC rotary table with direct drive - Siemens SINUMERIK 840 D-POWERLINE control system - Tool magazine with 40 positions - Approx. 90 HSK 100 tool holders included - Complete documentation The machine can be transported on trucks up to 3,000 mm wide.